Fasteners & Hardware

Circuits

SAS Adapters offer Raid 6 support for data security.

Featuring 667 MHz cache interface, MegaRAID® ROC (RAID-on-Chip) SAS adapters enable channel customers to build single-platform SAS infrastructures that support SAS/SATA drives. Based on SAS1078 controller IC, products provide internal RAID 6 capabilities to tolerate up to 2 simultaneous drive failures and manage unrecoverable media errors during rebuilds. Controller also provides PCI...

Read More »
DE-STA-CO's Versatile Conveyor Systems to Debut at MD&M East 2007
Conveyors

DE-STA-CO's Versatile Conveyor Systems to Debut at MD&M East 2007

Auburn Hills, Michigan, April 16, 2007 - DE-STA-CO's new DCM Light Duty Conveyor series will be demonstrated along with a variety of workholding and automation products on in booth #3338 at MD&M East 2007. MD&M East will be held in New York City from June 12 - 14 at the Jacob K. Javits Convention Center. With a compact design and integrated control, the light duty conveyor is ideal for...

Read More »
Flange Lock Nuts resist corrosion in harsh environments.
Nuts

Flange Lock Nuts resist corrosion in harsh environments.

Available in 18/8 SS, Spinner-Grip(TM) Flange Lock Nuts are suited for use in industries such as chemical, fluid process, medical, food service, automotive, and industrial. Free-spinning design eliminates need to tighten by wrenching nut down bolt, and nuts lock base to part, providing tensile strength to hold entire fastener assembly. Units usually do not require use of flat washers, and...

Read More »
Caps

Caps are suited for high temperature masking.

Designed to mask fittings during finishing processes such as powder coating, e-coating, or plating, HJS series can withstand temperatures up to 500°F. Featuring soft, flexible feel and pull-tab with special finger grips, caps maintain flexibility even after masking process is over. Pull-tab can be removed after processing or be left on as shipping protection.

Read More »
Adapters

Drive Adapters replace IDE/SATA HDDs with CF media.

Offered in 3 versions, CF Hard Drive Adapters enable Compact Flash (CFI/II) media or Micro Drive to be used as direct replacement for 2.5 in. IDE or SATA hard drives (HDDs) in notebook, desktop, or industrial PCs. SATA version has single CF slot, while IDE and embedded 44-pin IDE-CF adapters offer choice of 1 or 2 slots. Once installed, CF card appears as ordinary hard drive to system BIOS and...

Read More »
Eyelets

Bolt Products to Distribute DOT Eyelets Scovill Fasteners

In April 2007 Bolt products successfully concluded a new marketing agreement to represent Scovill Fastening Solutions in California. As a distributor Bolt Products was looking for a high quality eyelet fastening solutions, an OEM, like DOT / Scovill that it can add to its supply chain that is RoHS compliant. DOT / Scovill eyelets are high strength, heavy duty construction, uniform in size, and...

Read More »
700PD Power Drive and Adapter
Motor Controllers and Drives

700PD Power Drive and Adapter

Add power to your drilling and tapping jobs, and save hours of hand-cranking! Reed offers the 700PD electric power drive to power tapping and drilling machines. Use the power drive 13/16 adapter (TMPDA) to fit the boring bar on popular drilling and tapping machines. The adapter fits Reed's TM and DM series machines, Mueller" B100/B101, and other machines with the same 13/16" square drive. The...

Read More »
Washers

Wave Springs come in single- and multi-turn models.

Consisting of coiled flat wire with waves for spring effect, Wave Springs can act as load bearing devices, compensating for accumulated tolerances in assemblies and providing end-play take-up. Units exert force on assemblies made to low side of tolerances, but can also give when parts are made to high side of tolerances.

Read More »
Telescopic Leg promotes ergonomic workstation adjustment.
Legs

Telescopic Leg promotes ergonomic workstation adjustment.

TELESCOPIC LEG ASSEMBLY, available for OEM height-adjustable applications, features 2 columns with manual (hand crank) or electric actuation. Offering lifting capacities of 250 lb/column or 500 lb/set, product enables ergonomic positioning regardless of off-center or cantilever loads. Multiple columns are also available. For installation, assemblers secure top and bottom frame with four 5/16 in....

Read More »
Fasteners enable panel-on-panel attachment and detachment.
Fasteners

Fasteners enable panel-on-panel attachment and detachment.

With PEM® KEYHOLE® Type SKC-F(TM) sheet joining fasteners, 2 sheets can be joined flat against each other and then detached by sliding top sheet sideways and lifting it off from panel-on-panel assembly. Units install permanently in aluminum or steel sheets as thin as .040 in. and will accommodate second sheet made from any material. Constructed of stainless steel, RoHS-compliant...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics