Fasteners & Hardware

Decking Tool accelerates metal decking installation.
Automation Systems

Decking Tool accelerates metal decking installation.

Designed to work with range of collated fasteners, Hilti SDT 30 Stand-up Decking Tool allows operators to work upright at all times, and can load up to 50 collated fasteners at one time. SDT 30 gives operators flexibility to complete both sidelap and thin bar joist applications with just one tool. It accepts ST 1800 Metal Screwdriver with adjustable torque clutch, allowing operators to set...

Read More »
Boker's Complimentary Sample Pack Demonstrates Company's Broad Variety of Washers, Spacers and Shims
Shims

Boker's Complimentary Sample Pack Demonstrates Company's Broad Variety of Washers, Spacers and Shims

Minneapolis, MN-March 16, 2009-Boker's, Inc., a manufacturer of washers, spacers, and metal stampings for 90 years, is offering a free sample pack featuring selections from their extensive line of products. Samples include washers chosen from the company's 23,000 non-standard washer and spacer sizes and 2,000 material options. Boker's washers and spacers are available with outside diameters from...

Read More »
Network Appliance Platforms offer multiple security options.
Servers

Network Appliance Platforms offer multiple security options.

Xeon FW-8881, built on Intel 5100 chipset, and FW-8891, with Intel 5000 chipset, are contained in 2U rackmount, modular chassis. Units feature 4 GbE network ports, 2 customizable network modules, redundant power supplies, and 2 hot-swappable 3.5 in. hard drive trays. Providing gateway antivirus, firewall, unified threat management, and intrusion detection/prevention, models feature software...

Read More »
Fastening Device is designed for rotating components.
Fasteners

Fastening Device is designed for rotating components.

Featuring infinite radial and axial adjustments and quick lock and release action, M-Type Shaftloc® provides locking solution for rigidly mounting hubless gears, sprockets, pulleys, cams, or thin-walled components onto an inch or metric shaft. Asymmetric thread geometry of stainless steel unit produces radial clamping force when nut is tightened. Available from stock to fit .375, .500, and...

Read More »
Richco, Inc. Releases FCWSS Series Flat Cable Wire Saddle
Saddles

Richco, Inc. Releases FCWSS Series Flat Cable Wire Saddle

MORTON GROVE, IL - February 25, 2009 - Richco, Inc. is happy to announce the release of its new flat cable wire saddle series, the FCWSS. The FCWSS is designed to hold down standard Serial ATA cable. It is easily installed into a pre-drilled hole and its locking top is releasable for repair or replacement of cables. The flexible wing accommodates a range of cable thicknesses and provides a slight...

Read More »
Fasteners

Removable Barbed Fastener is RoHS compliant.

Removable barbed fastener, BPFR can be installed in 5/16 (M8) threaded hole or 7 mm non-threaded through hole or blind hole, and removed using Phillips screwdriver. As clips are installed, ribs deflect and spring back after they pass through hole for secure, non-removable lock.

Read More »
Latches

Tornado-Resistant Exit Device meets FEMA 361 guidelines.

Designed as 2-point surface vertical rod exit device, FM8700 Series helps protect lives by securing community shelters and safe room entries. It surface-mounts to door and meets all life safety code requirements for panic egress and fire resistance. During FEMA 361 testing, this 2-point latching panic hardware, mounted on one pair of ASSA ABLOY doors, kept them safely latched and closed during...

Read More »
Cable / Wire Ties

Richco, Inc. Releases WIT-50XA Arrowhead Cable Ties

MORTON GROVE, IL - February 25, 2009 - Richco, Inc. is pleased to announce the release of its new arrowhead cable ties, the WIT-50XA. The WIT-50XA features an integrated arrowhead mount that reduces inventory and saves time in application. The tension wings provide pressure to the panel stabilizing the mount. The WIT-50XA also allows for the bundling of cables to be done before or after mounting...

Read More »
Standoff Cable Clamps are RoHS compliant.
Cable Clamps

Standoff Cable Clamps are RoHS compliant.

SCCA and SCCB Series standoff cable clamps feature press-through cable entry design, which provides smooth entry into clamp as well as minor locking feature on SCCB. Cupped base provides coverage of hole and prevents contaminants from entering hole, while providing added stability to panel.

Read More »
Hinged Twist Lock simplifies cable installation.
Cable Clamps

Hinged Twist Lock simplifies cable installation.

RoHS compliant hinged-twist lock TLSE allows for cables to be mounted with clips in 2 different positions; above crowded boards and panels using standoff feature, or to side of mounting device and board in hinged position. Hinge device minimizes volume of parts during transportation and optional use of anti-rotation pin prevents parts from twisting on board. Cables can be locked and unlocked by...

Read More »

All Topics