Fasteners & Hardware

Fasteners & Hardware

Flush-Head Studs offer quick mating with plastic fasteners.

Dec 04, 2015

Integrating X-Press™ threads, PEM Type FHX™ Studs enable quick mating with push-on plastic nuts, wire tie products, or other plastic fasteners in thin metal assemblies. Self-clinching units install permanently in metal sheets as thin as 1 mm and press into place using any standard press. Available with 5 mm and 6 mm threads in lengths from 10–25 mm, studs are made from hardened carbon... Read More

Fasteners & Hardware

Compact Rotary Latch features dual trigger actuation.

Dec 03, 2015

Suitable for doors and panels that require actuation from multiple positions, R4-10 provides concealed latching and increased security. Multiple points of actuation allow triggering via 2 independent actuators. Constructed of corrosion-resistant steel, product is available with integrated bumper feature and single- or dual-stage latching. Latch can be combined with Southco mechanical and... Read More

Fasteners & Hardware

Endboard Clips with a Grip

Dec 03, 2015

Steel clips feature special barbs to grip endboards and pallets. Greenville, Wis. – Steel H-Clips and U-Clips from Badger Plug are used regularly to secure shipments of roll products suspended with endboards. H-Clips help interlock one endboard atop another; U-Clips help secure endboards to the pallet. Every Clip possesses a tight tolerance to grip endboards, additional superior holding... Read More

Fasteners & Hardware

Lifting Pins are designed for accelerated, facilitated use.

Dec 02, 2015

Offered in metric sizes, GN 1130 Steel Lifting Pins are carrier elements designed for usability and facilitated handling. Red aluminum button releases locking effect of locking balls, allowing load pin to be moved in or out of holding bore hole. Shackle rotates by at least 180°, with safety flange fitted as safeguard against inadvertent operation. Depending on pull direction, ball load... Read More

Electrical Equipment & Systems, Fasteners & Hardware, Material Handling & Storage

Two-Part Clamps support coarse- and fine-profile conduit.

Nov 25, 2015

Featuring single rib that makes brackets compatible with both coarse- and fine-profile conduit, PMA® GP Two-Part Support Clamps are designed for use in rail vehicles and vehicles with particularly demanding requirements, as well as wind turbines and other special-purpose machinery. Units offer simplified assembly, with locating pins to lightly hold 2 halves in position. By allowing conduit... Read More

Fasteners & Hardware, Machinery & Machining Tools

Face Milling Tool targets automotive industry.

Nov 20, 2015

Featuring 8 edges, CoroMill® 425 optimizes metal removal rate and tool life in ISO K application area. Finishing tool is intended for face milling of cast materials, such as engine and cylinder components, axle housings, brake carriers, and crankcases made of GCI, NCI, and CGI materials. With patented setting system, tool offers precise insert positioning that facilitates set-up. Insert... Read More

Fasteners & Hardware, Material Handling & Storage, Mounting & Attaching Products, Plant Furnishings & Accessories

Cam Roller Carriages accommodate cam roller guide rails.

Nov 18, 2015

GN 2424 aluminum or steel cam roller carriages for GN 2422 cam roller guide rails are available in metric sizes. Used in building roller guide systems, RoHS-compliant carriages are used in mechanical engineering or jigmaking for linear movement of plant equipment. Cam roller carriage, depending on type, allows mounted in axial or radial direction to roller axes. Similarly dependent, matching... Read More

Electrical Equipment & Systems, Fasteners & Hardware, Portable Tools

Cable Tie Application Tools feature ergonomic design.

Nov 16, 2015

Constructed with impact-resistant housing and durable components for extended service life, EVO 9 Series tensions and provides clean, flush cuts for 50–250 lb heavy-duty cable ties, including wide strap ties. Tension knob offers 33 different settings for precise, repeatable applications. With quick-adjust tension feature, user can move 3 stops at a time to quickly jump between higher and lower... Read More

Fasteners & Hardware

Round and Square Hole Cage Nuts have snap-in design.

Nov 10, 2015

OCN Series facilitates mounting of equipment into square or round holed 19 in. racks. Heavy-duty, black zinc-plated products promote strength-to-weight ratio and provide flexibility to mount anywhere with metric or SI bolts. Available in M6, 10–32, and 12–24 thread sizes, cage nuts are specifically designed for mounting Orion's speed controller, programmable thermal controller, and... Read More

Controls & Controllers, Fasteners & Hardware, Plant Furnishings & Accessories, Safety & Security Equipment, Sensors Monitors & Transducers

NAPCO to Exhibit Innovative Security Product and Service Offerings at ISC East

Nov 09, 2015

Company to Showcase Latest Lineup at New York's Javits Center on November 18-19 AMITYVILLE, N.Y. – NAPCO Security Technologies, Inc. (Nasdaq: NSSC), one of the world's leading solutions providers and manufacturers of high-technology electronic intrusion security with recurring revenues, connected home, video and fire systems, as well as enterprise-class access control and door... Read More

Fasteners & Hardware

Seginus Inc. is Pleased to Introduce P723526EH Lock Washer

Nov 06, 2015

PMA Replacement Lock Washer P/N P723526EH is a onetime use component designed to secure spanner nuts. The Lock Washer is used to secure the Cooling Fan at the rear of the Thales Starter Generator and is part of the torque shaft vibration damper assembly at the front of the LRU. This unit is installed on ATR-42 and ATR-72 and Dornier Model 328-100 and Dornier Model 328-300 aircraft. Seginus Inc.... Read More

Fasteners & Hardware

Seginus Inc. is Pleased to Introduce the 1600273-002EH Seal Nut

Nov 05, 2015

The PN 1600273-002EH is eligible for installation on Various Pratt Whitney Power Plants. The Seal Nut is used in the Aero Controlex Group Turbine Case Cooling Control Valve (TCC Valve) control cable part numbers 1605140-002 and 1606130-001. Pratt Whitney Model Eligibility: The TCC cable assembly is installed on Pratt & Whitney PW4 Series Motors. For more specific model eligibility details, please... Read More

Fasteners & Hardware

Seginus Inc. is Pleased to Introduce the M62290-4EH, M62290-6EH, M62290-10EH Jam Nuts

Nov 04, 2015

The M62290-4EH, M62290-6EH, M62290-10EH are eligible for installation on Various Pratt & Whitney Power Plants. The Jam Nuts are used in the Aero Controlex Group Turbine Case Cooling Control Valve (TCC Valve) control cable part numbers 1602020-001, 1604220-001, 1605140-001, 1605140-002, 1606130-001, and 1606130-002. Pratt & Whitney Model Eligibility: The TCC cable assembly is installed on Pratt &... Read More

Fasteners & Hardware

PennEngineering® License Agreement with EJOT® GmbH & Co. KG for PT® and Delta PT® Screws for Plastics

Oct 30, 2015

PennEngineering® (Danboro, PA, USA) has entered into a license agreement with EJOT® GmbH Co. KG, Industrial Fastener Division (Bad Laasphe, Germany) covering EJOT® PT® and Delta PT® screws for plastic applications.  The agreement allows PennEngineering to use EJOT® technical information, patent rights, and trademarks in connection with the manufacture and sale of PT® and... Read More

Fasteners & Hardware, Portable Tools

Silver PVD Inserts support ISO-M and ISO-S machining.

Oct 28, 2015

With high temperature wear resistance, Tiger•tec® Silver PVD Coated Inserts are designed for machining stainless steel, high temperature alloys, and other materials that are difficult to machine. Special surface smoothing on rake face minimizes friction, keeping heat generation in check. Available in WSM10S, WSM20S, and WSM30S grades, inserts offer 3 positive geometries: FM4 for finishing... Read More

Electrical Equipment & Systems, Fasteners & Hardware, Mechanical Power Transmission, Transportation Industry Products

Seginus Inc. is Pleased to Introduce EH001687-12 Bearing and EH81701516 Cup Washer.

Oct 28, 2015

The EH001687-12 Bearing and EH81701516 Cup Washer are eligible for installation on Hawker Beechcraft Aircraft AC Generators. The Bearing and Cup Washer are components of the AC Generator, which provides electrical power to the aircraft windshield heaters. The Bearings and Cup Washer are eligible for installation on Lucas Aerospace BA02801-1 AC Generator. Model Eligibility: Hawker 800, Hawker 800... Read More

Fasteners & Hardware, Mounting & Attaching Products

Hitch Adapter accepts Cat I attachments.

Oct 26, 2015

With Quick Hitch Adapter, operators can use Cat I non-PTO powered implements on skid steers. Hitch features lower hooks designed to capture and retain 7/8 in. lift pins without use of bushings, adjustable top hook for attaching to implements of varying heights, and floating top link bracket for implements that will not accept top link hook. Adapter is suitable for mounting box scrapers,... Read More

Fasteners & Hardware, Fluid & Gas Flow Equipment, Mechanical Power Transmission

Seginus Inc. is Pleased to Introduce 9920-020000-01EH and 9135- 000000-05AEH Sealing Shaft and Plunger Assemblies

Oct 26, 2015

The Sealing shaft and Plunger are both used in water valve assemblies manufactured by AOA Luftfartgeräte Gauteng of Germany. The water valves are solenoid operated valves which control the water supply to the toilet assembly spray ring. Seginus Inc. has released the following FAA PMA replacement parts to aid in your cost reduction programs when maintaining your Water Valve Assemblies... Read More

Fasteners & Hardware, Materials & Material Processing

G.L. Huyett Rolls Out Dowel Pins Line Expansion

Oct 23, 2015

G.L. Huyett, an ISO 9001 certified manufacturer, master distributor, and importer of non-threaded fasteners and grease fittings, has expanded their lines of hardened and unhardened ASME, DIN, and MS precision ground dowel pins. Minneapolis, Kansas – G.L. Huyett, a manufacturer, master distributor, and importer of non-threaded fasteners and grease fittings, is proud to offer a larger selection... Read More

Fasteners & Hardware

Bearing Stand-Offs feature one-piece design.

Oct 22, 2015

Engineered for System Plast™ flanged mounted bearings and Sealmaster® composite-flanged PN Gold bearings, Single-Piece Stand-Offs integrate bolt-spacer ferrule and stand-off in one assembly for sanitation compliance in food/beverage operations. Design eliminates loose parts during installation, optimizes bearing alignment, and creates 5/8 in. gap behind bearing flange for... Read More