Fasteners & Hardware

Foam Inserts facilitate tool storage.
Foams

Foam Inserts facilitate tool storage.

Designed for Pelican(TM) Product's 0450 Mobile Tool Chest, Case Fit(TM) Drawer Liner Kits include 6 shallow drawer foam sets containing Â-¾ in. thick black foam with pressure sensitive adhesive and ¼ in. thick foam. Deep drawer set contains 2 pieces of 7/8 in. thick black foam with pressure sensitive adhesive and ¼ in. foam. Case Fit DL 45 is made of closed-cell, oil...

Read More »
Sandvik Coromant Introduces New High Performance Inserts for CoroThread 266
Threaders

Sandvik Coromant Introduces New High Performance Inserts for CoroThread 266

Fair Lawn, New Jersey, June 16, 2009 - Sandvik Coromant has introduced a new insert size for the CoroThread 266, allowing the ultra-rigid tool to be used in the majority of general threading applications. The new size 16 inserts complement the existing sizes 22 and 27. The CoroThread 266 integrates Sandvik Coromant's unique iLock(TM) interface, which uses rails and grooves to create an incredibly...

Read More »
Latch achieves ultimate tensile strength of 7,500 kgf.
Latches

Latch achieves ultimate tensile strength of 7,500 kgf.

Available with catchplate (Part No: 04-9000 MSZN), Big Bertha 490-9000 MSZN provides up to 30 mm of grip range adjustment. Zinc plated, mild steel latch assembly measures 392 x 85 x 40 mm, including catchplate at max capacity. Suitable for heavy duty applications found in earthmoving, mining equipment, aggregate conveyors, agricultural plant, freight, and off-highway vehicles.

Read More »
Support All Types of Reinforcing Steel with Strong, Lightweight Plastic Rebar Supports from Erico®
Rolling Wheels

Support All Types of Reinforcing Steel with Strong, Lightweight Plastic Rebar Supports from Erico®

SOLON, Ohio, USA, June 2009 - Plastic Rebar Supports, part of the LENTON® line of concrete reinforcement products from ERICO®, are used in tilt-up, precast and cast-in-place slab and deck construction. The supports, which include Rebar Chairs, Slab/Beam Bolsters and Wagon Wheels, are ideal for supporting all types of reinforcing steel, such as stainless, black and epoxy-coated rebar. The...

Read More »
Straps

Tow Straps feature heavy-duty, abrasion-resistant design.

Tugosaurus(TM) premium heavy-duty tow straps feature reinforced eyes, abrasion-resistant SafEdge that runs length of straps, and elastic tie cord. Colored red and black, units include 6 x 12 in. Strap Armor(TM) protection pad manufactured with industrial rubber to help protect straps from nicks and abrasions. Straps are offered in 2 in. x 30 ft versions with 20,000 lb capacity and 3 in. x 30 ft...

Read More »
Over 670 Knobs in a Wide Range of Styles & Materials are Stocked by All Metric Small Parts
Knobs

Over 670 Knobs in a Wide Range of Styles & Materials are Stocked by All Metric Small Parts

NEW HYDE PARK, N.Y.--A new series of 670 knobs of all types from All Metric Small Parts are stocked in 6 different materials. These knobs, identified as the MMAH, MMAN, MMAX, MMAA and MMAY Series, range in diameter from 9.6 mm to 100 mm. They include the following types: knurled, dimpled, wing, triangle, up to six-lobed, star, spherical, scallop and mushroom shaped. Materials include: aluminum,...

Read More »
Cable Ties are hand safe and snag proof.
Cable / Wire Ties

Cable Ties are hand safe and snag proof.

Low Profile Cable Ties feature low head height and, when cut, stub is concealed within head to create smooth, snag-proof outer surface that conforms to bundle. They are available in UV-resistant black and natural nylon, and can be installed using industry standard tools. UL/CSA listed, QPL approved, ties come in 7-16 in. sizes in medium and heavy duty styles, and are suited for wire harnesses and...

Read More »
Stub End Holder simplifies thermoplastic pipe fusion.
Fastener and Hardware Holders

Stub End Holder simplifies thermoplastic pipe fusion.

Stub End Holder, designed for 8, 12, and 18 in. jaws or inserts, holds stub end fittings in place during fusion process. It features single adjustment point that adjusts all 4 jaws simultaneously, while automatically self-centering to ensure that stub end is held concentric to pipe. Devices feature serrated jaw to optimize gripping ability. Weighing less than 30 lb, they allow operators to clamp...

Read More »
Laser Cutting Head suits 3D cutting of 0.5-6 mm thick metals.
Plasma / Flame / Laser Cutters and Cutting Machinery

Laser Cutting Head suits 3D cutting of 0.5-6 mm thick metals.

Engineered for 3D robotic cutting of metals using fiber-coupled lasers in harsh production environments, FiberCut compact, low moving mass head minimizes inertia transfer to robot support arm. All connections leading to head enter at right angle, including fiber, providing tight access to parts, cable routing and stress reduction on input fiber. Head works with all leading fiber-delivered laser...

Read More »
Nuts

DISC-LOCK Safety Wheel Nuts Installed on New York City Department of Sanitation Hybrid Electric Truck

Culver City, Calif. - June 19, 2009 - DISC-LOCK International today announced the use of their Safety Wheel Nut by the New York City Department of Sanitation on the city's diesel-electric hybrid refuse trucks. "With the installation of our Safety Wheel Nut, the city of New York has added a large measure of public safety in addition to the city's commitment to efficient and environmentally...

Read More »

All Topics