Fasteners & Hardware

Lugless BOP Cap provides secure sealing.

Lugless BOP Cap provides secure sealing.

Suitable for installation on older 150H(TM) BOP models that currently have wing caps, Hercules-® Lugless 150H(TM) BOP Cap has lugless end caps that allow operations to use wrench rather than hammer. Unit can be operated with standard 24 or 36 in. pipe wrench, 36 in. adjustable wrench, or 3 in. wrench. Product provides security for operators, secure sealing without leakage, and optimized service...

Read More »
Permanent Captive Panel Screws offer 2 mounting styles.

Permanent Captive Panel Screws offer 2 mounting styles.

PEM-® Type PF7M(TM) has self-clinching mounting design and installs flush on back of panels as thin as .036 in. They come in 2 screw lengths with thread sizes No. 4-40 through No. 8-32 and M3-M4 and install into panels with hardness of HRB 80 or less or HB 150 or less. With flaring design, PEM-® Type(TM) PF7MF installs flush on back side of panels as thin as .031 in. and come in 2 screw lengths...

Read More »
Adjustable Ball-Lock Pin solves grip length problems.

Adjustable Ball-Lock Pin solves grip length problems.

Adjustable Clamping Length Ball Lock Pin is suited for use when distance of grip length does not match specs of standard size ball-lock pin (quick release pin). In addition to Stainless Steel 1.4305 or Stainless Steel 1.4542 (precipitation-hardened, hard-coated) pin part, product features thermoplastic silver adjusting nut, thermoplastic black lock nut, and stainless steel spring. This 100%...

Read More »

Sealing Washers withstand 12,000 psi hydrostatic pressure.

Made of 316 stainless steel, corrosion resistant high-strength BarTite line sealing washers lock out moisture, vapors, liquids, chemicals, and pressurized air. They employ patented, stable, and non-aging plastisol formula resistant to petrochemicals, acids, solvents, and salt sprays. When torque is applied 360-

Read More »
Cutters and Inserts hasten heavy-duty application feed rates.

Cutters and Inserts hasten heavy-duty application feed rates.

Optimized for cuts of 1.250-4.000 in. dia, RHINO-FEED(TM) Heavy-Feed cutters and inserts allow for accelerated feed rates in moderate- to heavy-DOC and -FPT applications. Heavy-Feed 12 mm IC (inscribed circle) inserts have 4 usable edges and strong cross-section. End mills and shell mills feature top clamping strength suitable for heavier DOC (up to .060 in.) and larger machines, such as 50-taper...

Read More »

Toronto Pearson International Airport Increases Security and Reduces Costs with a T-DAR Piggybacking and Tailgating Detection and Prevention System

Seattle, WA - Security managers at Toronto Pearson International Airport in Canada are poised to benefit from a reduction in operating costs with the July 1 deployment of the recently constructed tailgate prevention system featuring T-DAR-® stereo vision technology developed by Newton Security Inc. The T-DAR system, which stands for Tailgate Detection Alarm and Recording, was installed by...

Read More »
Mounting Clamp permits one-handed quick release.

Mounting Clamp permits one-handed quick release.

Suited for joining steel and aluminum process equipment covers and ports with up to 750 lb of clamping force, quick release mounting clamp helps OEMs boost access to machinery internals. It mounts permanently on process equipment and features yoke and pin assembly that enables tension release without any unscrewing or dismounting. When returned to closed position, retractable clamp design...

Read More »
Clamping Heads come in inch and metric sizes.

Clamping Heads come in inch and metric sizes.

Designed for clamping knobs or screws, Series AN 5672 is available in nickel-plated brass or stainless steel, European Standard No. 1.4301. RoHS-compliant clamping heads are used in conveyor systems to affix adjusting rods. They are typically mounted to side bracket, but can be assembled where needed on conveyor.

Read More »

Socket Sets, Creepers meet needs of every skill level.

Available with 12-47 separate pieces, Williams Compact Case Socket Sets feature chrome vanadium steel tools and sockets with SUPERTORQUE-® lobular openings. Williams Rugged Case Tool Sets, offered in 11 sets ranging from 20-95 separate pieces, include shock proof products equipped with heavy-duty metal latches and hinges for professional mechanics and tradesmen. Creeper options include...

Read More »

Continental-Aero Now Stocks Full Line Of Grade 5 Nylon Insert Locknuts

Today, Continental-Aero is proud to announce the addition of a full line of Grade 5 Nylon Insert Locknuts stocked at its Alsip Illinois site. Continental-Aero since 1948 is known for its full line of Branded Purple Grade 2 and 8 Nylon Insert Locknuts, along with Gr. 5 and 8 Finished Hex Nuts and All-Metal locknuts. The Gr. 5 Nylon Insert Locknuts are available from 1/4 and run through 1 in both...

Read More »

All Topics