Fans

Micro Sized Fan is rated for low power consumption at .175 W.
Fans

Micro Sized Fan is rated for low power consumption at .175 W.

Ultra-thin, micro-sized fan Super-Flow Micro delivers output of .57 cfm and comes with IP 57 water resistance rating. Designed to provide min 30,000 hr of life, fan is suited for various space-limited applications, including PDA, MID, smartphone, CCTV, GPS, mask and goggle, pocket projector, micro fuel cell, and air sensing usages.

Read More »
Compact, Motorized Axial Fans operate free from vibration.
Fans

Compact, Motorized Axial Fans operate free from vibration.

AMI precision-balanced fans, suited to limited-space applications, offer vibration-free operation thanks in part to coupling of motor and impeller, which are located directly in air stream. Impeller acts as rotating heat sink, and fan speed is completely controllable. Available in sizes from 170-300 mm and capacities from 300-1,700 cfm, fans are offered with standard or reverse flow...

Read More »
Fans

Tubeaxial 4.69 in. Fans provide high-speed operation.

Models 4100NH3 and 4100NH6, constructed with air intake over struts, handle dense system requirements, such in AdvancedTCA chassis. At free air (0 static pressure), 4114NH3 provides 182 cfm at 6,000 rpm, while 4114NH6 provides 259 cfm at 8,400 rpm. Model 4114NH6 also offers performance to 200 cfm at 1 in. of H2O. Both fans are offered in 12 (H3-H5), 24, and 48 Vdc variations.

Read More »
Tubeaxial Fan is available in 92 mm version.
Fans

Tubeaxial Fan is available in 92 mm version.

Model 3200JH3 Tubeaxial Fan operates at 135 cfm in free air and features fan blade with sickle shape and winglets. Equipped with intelligent electronics to achieve maximum efficiency, fan is offered in 24 and 48 Vdc variations and exhibits low noise operation even under high back pressures. Ball bearing cooling system extends service life.

Read More »
Belt-Driven, Tubeaxial Fan has performance-optimized design.
Fans

Belt-Driven, Tubeaxial Fan has performance-optimized design.

Built for aerodynamic efficiency performance, AIB Belt Drive Tubeaxial Fan delivers airflow capacities to 54,000 cfm and features heavy-duty welded steel housing and angle ring flanges. Other features include spark-resistant, cast aluminum airfoil axial impeller; factory set, adjustable pitch blades; and TEFC industrial-duty motor located outside of air stream. Offered in diameters from 12-60...

Read More »
Exhaust Systems

Met-Pro Corporation's Strobic Air Subsidiary Receives International Equipment Order Totaling Approximately $600,000

Harleysville, PA - Raymond J. De Hont, Chairman and Chief Executive Officer of Met-Pro Corporation (NYSE:MPR), announced today that the Company's Strobic Air subsidiary in Harleysville, Pennsylvania, received an order totaling approximately $600,000 from a nanotechnology laboratory in Western Europe. This order, which is for ten (10) Tri-Stack(TM) fans to be used for laboratory exhaust, is...

Read More »
Stackable DC Fans offer airflow range from 120-225 cfm.
Fans

Stackable DC Fans offer airflow range from 120-225 cfm.

Featuring diecast aluminum frame and UL94V-0 plastic impeller, Series OD172SAPL fans measure just 172 x 150 x 38 mm and feature 2 flat sides for side-by-side installation with no wasted space. Fans feature dual ball bearing system and polarity protected, auto restart, brushless DC motor. Available in 12, 24, and 48 Vdc versions with voltage ranges of 8-14, 15-28, and 28-63 V, respectively, fans...

Read More »
Backward Curved Fan Impeller provides 8,050 cfm capacity.
Impellers

Backward Curved Fan Impeller provides 8,050 cfm capacity.

Featuring electronically commutated external rotor motor, CEC Backward Curved EC Motorized Impeller is suited for many air-moving applications including cooling of motor controls, electronics, power converter cabinets, and modular air conditioners. Speed controllable unit comes in housed or non-housed models with input voltage of 380-480 V, 50/60 Hz 3-phase.

Read More »
Utility Fans come in eleven sizes ranging from 8-24 in.
Fans

Utility Fans come in eleven sizes ranging from 8-24 in.

Heavy gauge, rugged welded steel constructed FCU Utility Fans have capacities ranging from 237-20,056 cfm. Featuring forward curved belt drive blowers, units suit low to medium pressure ventilating and exhaust applications. Devices are available in SWSI, Arrangement 10, Class I construction, and include self-aligning pillow block bearings, circular stamped inlet ring, adjustable V-belt drive, and...

Read More »
Fans

Horton Announces New Quick-Ship Program for Aftermarket Fans

ROSEVILLE, Minn.-Horton, Inc. announces a new quick-ship program for select aftermarket clockwise WindMaster® Plastic Fans. Orders for up to two qualifying fans, processed by 2:00 pm Central Standard Time or 3:00 pm Eastern Standard Time, are shipped on the same day for fans in stock. Fans not in stock will ship in one to two business days. The quick-ship program applies to urgent-service...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers