Outwater Introduces Many New Woodworking Products at the 2014 International Woodworking Fair (IWF)
Wood Beams

Outwater Introduces Many New Woodworking Products at the 2014 International Woodworking Fair (IWF)

Bogota, NJ (www.outwater.com) – Outwater [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC featured many new woodworking products at the 2014 International Woodworking Fair proposed to effectively address and respond to the necessity for woodworkers to improve their productivity and increase their revenue in a progressively more competitive marketplace.   The...

Read More »
Davis-Standard Seven-Layer Line Excels in Lightweight Film Production
Plastic Extrusion Services

Davis-Standard Seven-Layer Line Excels in Lightweight Film Production

Pawcatuck, Conn. – A new Davis-Standard seven-layer blown film line at Raven Industries exemplifies the benefits of performance and efficiency for lightweight films. The line, installed at Raven’s facility in Sioux Falls, Sound Dakota, features next generation technology for manufacturing precise lightweight barrier films ranging from 0.80 mil to 10 mil in thickness. Adding this capability...

Read More »
Cleanroom Operations produce film for medical devices.
Contract Manufacturing Services

Cleanroom Operations produce film for medical devices.

Providing film extrusion in Class 10,000 environment, Cleanroom Manufacturing Operations support prototype development, scale-up, and manufacturing of film for use in regulated medical devices, including wound care and implants. Extrusion line is capable of producing film up to 52 in. wide in thicknesses from 0.0005–0.070 in., with in-line X-ray gauge dimension reporting. Line processes wide...

Read More »
Process Control System supports flexible PVC extrusion.
Miscellaneous Controls

Process Control System supports flexible PVC extrusion.

By eliminating lay-flat issues, width and gage variations, uneven shrinkage, and tendency of material to curve slightly to one side when unwound, Process Control System ensures complete dimensional uniformity and tension throughout bulk PVC rolls produced. Prior to control, operators would have to manually adjust line to maintain consistency on product-to-product basis. Control eliminates...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Discontinuous Lamination
Plastic Extrusion Services

Discontinuous Lamination

Lauren Manufacturing Develops In-House Discontinuous Lamination Technology for Extruded and Molded Products NEW PHILADELPHIA, OhioÂ- – A leader in forward thinking and innovation, Lauren Manufacturing provides its customers with multiple options to laminate polymer products. For almost 50 years, Lauren Manufacturing has perfected continuous lamination processes for polymer products using...

Read More »
Plastic Extrusion Services

AFLAS 100 and 150 Series Fluoroelastomers are Ideal for Molded and Extruded Components Used in Extreme Environments

Unique formulation yields superior performance characteristics over conventional FKM-type fluoroelastomers EXTON, Pa. – AGC Chemicals Americas Inc. offers AFLAS® 100 and 150 Series fluoroelastomers for molded and extruded components that need to withstand extreme conditions such as heat, steam, and corrosive chemicals. AFLAS fluoroelastomers are a preferred product for manufacturing wire...

Read More »
Pneumatic / Vacuum Conveyors

K-Tron Announces Joint Exhibition with Coperion at Feiplastic 2013, May 20-24, Sao Paulo, Brazil, Booth H100 - Presenting Complete Plastic Processing Solutions for Primary Resin, Compounding, and Extrusion Production

PITMAN, NJ USÂ- – K-Tron formally announces joint exhibition with Coperion at Feiplastic 2013, May 20-24, Anhembi Convention Center, Sao Pãulo, Brazil, Booth H100. Coperion has been appointed as the new representative for K-Tron in the market of Brazil. Booth will feature feeding, pneumatic conveying, extrusion, and systems engineered solutions for plastics processing applications...

Read More »
Extruded Plastic Sheet is available in pre-cut strip form.
Plastic Extrusion Services

Extruded Plastic Sheet is available in pre-cut strip form.

Any Ensinger/Penn Fibre extruded material up to .156 thick and 2 ft wide is available in pre-cut strips of various thicknesses and widths. Strips are slit from standard 2 x 4 ft sheets using modified slitter, and this method of pre-cutting is often needed in first step toÂ- stamping or machining operation. Since setup time is involved to prepare modified slitter to handle slitting...

Read More »
Gear Pumps

Maag to Exhibit at Chinaplas

Maag Pump Systems AG and Automatik Plastics Machinery GmbH will once again be joining forces and exhibit at Chinaplas in Guangzhou from the 20th through to the 23rd of May 2013. Maag Pump Systems will unveil its brand new EA pump, developed specifically for the Asian market. In addition, the company's ever popular extrex® pump family will make an appearance, also as part of an extrusion...

Read More »
Plastic Extrusion Services

Crescent Plastics, Inc., Evansville, IN has the Innovation to Produce Three Effects Using Plastic

Crescent Plastics, Inc., Evansville, IN has the innovation to produce three effects using plastic.Â-  Whether you need metallic, wood grain, foam or frosted parts, we are dedicated to providing quality, product enhancement, durability, strength and cost savings with the development of thermoplastic profile extrusion.  We can provide off-line fabrication, automated on-line...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers