Gears

2010 Ondrives Company Profile for Total Processing & Packaging Exhibition

ONDRIVES GEARS FORWARD A commercial and precision gear range is the latest addition to Ondrives' extensive product portfolio, further enhancing their newly launched power transmission series, states Marketing Manager, Amanda Laughton. The array of products offered broadly consists of bevel gears, worms & wheels, anti-backlash wormwheels, internal gears, anti-backlash gears, both parallel &...

Read More »
Angle Grinder Shrouds protect users from silica dust exposure.
Grinders

Angle Grinder Shrouds protect users from silica dust exposure.

Series W8, W11, and WE-14 compact angle grinders are available with 5 in. shroud that allows use of 4, 4Â-½, and 5 in. diamond cup wheels, while large angle grinders W21-230, W23-180, W23-230, and W25-230 are available with 7 in. shroud. When used with proper vacuum system, convertible 5 and 7 in. dustless shrouds deliver OSHA-compliant protection from silica dust exposure for users involved...

Read More »
Air Conditioner Parts

Pink Plastic Caps Are a Green Topic in the World of Refrigerants

Environmentalists compelled the HVAC industry to create a new industry standard refrigerant and plastic caps maintain an important role to secure against contaminants. Environmentalists concerned with ozone-depleting chemicals are at the heart of the creation of the refrigerant known as R410A, although this is not a recent development. It was back in the '80's when the quest began to develop a...

Read More »
Plugs and Stoppers

Plastic Caps and Plugs Assist Design Engineers in Protecting Valuable HVAC Components

HVAC design is facing tough challenges from environmental concerns to efficiency standards, but plastic caps and plugs continue to offer high value. As though the economic pressures alone are not enough, the HVAC industry is facing regulatory demands brought about by the looming financial crisis. The quest to find alternative energy sources and improve efficiency standards is a direct result of...

Read More »
Plugs and Stoppers

Tubing Inserts Plug Into Signposts

Round and Square Tubing Inserts Compliment Standard Plug Line With the addition of tubing inserts to the StockCap line of caps and plugs, a manufacture of tubing was quickly able to fill a need on a project involving a signpost. The tubing manufacture was already a client of StockCap when they learned of the addition of the new tubing insert line. A tube insert was perfect for the signpost...

Read More »
Tactical Belts

Nylon Pouches/Belts are offered for law enforcement personnel.

As duty gear line for law enforcement, pouches and belts produced from Nytek® nylon composite fabric are available in plain and basketweave finish. Stronger, lighter, and more flexible than leather duty gear, products can be polished in same manner as leather and cleaned to disinfect blood-born pathogens. Breathable construction will not absorb water; will not fade, crack, or dry out with...

Read More »
Benchtop Cold Plate utilizes thermoelectric technology.
Plates

Benchtop Cold Plate utilizes thermoelectric technology.

Featuring 11.2 x 15.1 in. footprint, Model AHP1200CPV has machined aluminum cold plate surface measuring 5.8 x 13.3 in. At 25°C ambient, cold plate surface is controllable from -15 to +90°C, and options can extend that range to below -45°C and above +90°C. Providing precise adjustment of surface temperature within ±0.1°C, integral PID temperature control...

Read More »
Littelfuse Introduces Compact 3.6 x 10mm Single Pigtail Fuse Series
Fuses

Littelfuse Introduces Compact 3.6 x 10mm Single Pigtail Fuse Series

Littelfuse, Inc. (NASDAQ/NGS:LFUS) today announced the introduction of the first real 3.6 x 10mm single pigtail fuse. Using a direct weld production method, the new 874, 875, 876 and 877 series optimize this compact footprint by doing away with the additional fuse cap often seen with competitor products of this type. This series also offer higher I2T values than similar over-capped offerings in...

Read More »
New SP03-3.3 SPA(TM) Silicon Protection Array Offers Low Distortion Overvoltage Protection Solution for Broadband
Surge Suppressors

New SP03-3.3 SPA(TM) Silicon Protection Array Offers Low Distortion Overvoltage Protection Solution for Broadband

Littelfuse, Inc. (NASDAQ/NGS:LFUS) today announced an expansion to the SP03-x overvoltage suppression device series, designed for low distortion overvoltage protection of data lines and interface circuits in Ethernet, T3/E3, DS3, ADSL2+, and VDSL2+ systems. The new SP03-3.3BTG is RoHS compliant, provides higher surge rating and better clamping than competing devices, and offers a multi-element...

Read More »
Innovative Mounting Plate Saves Time and Money When Installing Conduit
Fastening Systems

Innovative Mounting Plate Saves Time and Money When Installing Conduit

SOLON, Ohio, USA, October 2009 - The SBT18 Multiple Conduit Mounting Plate, part of the CADDY® line of fasteners from ERICO®, enables contractors to install up to three runs of conduit on a variety of surfaces, including beams, purlins, metal and wood studs, and plain and threaded rods. Traditionally, contractors use a time-consuming method to run conduit that involves cutting lengths of...

Read More »

All Topics