Compact Zero Tail Swing Excavator has retractable undercarriage.
Powered by Tier 4-compliant, 13.9 hp diesel engine, E20 has 4,306 lb operating weight, 14 ft max reach, 8 ft 6 in. dig depth, and 8 ft 8 in. dump height. Respective low and high travel speeds are 1.5 and 2.5 mph, and overall width is reduced from 53Â-½ in. to 39 in. when rubber track undercarriage is fully retracted. Suited for confined spaces, excavator readily works with various...
Read More »
Crawler Excavators meet Tier 4 emissions regulations.
Powered by Scania diesel engines that have been configured with high-pressure common-rail fuel delivery system as well as cooled exhaust gas recirculation, 271 hp Model DX300LC-5 and 318 hp Model DX350LC-5 offer max digging depths of 23 ft, 11 in. and 24 ft, 8 in., respectively. Engines include mass airflow sensor and exhaust brake to help meet Tier 4 emissions standards. With 7 in. LCD,...
Read More »Portable, Trailer-Mounted Drill Rig is designed for shale.
Drilling rig T250XD provides 250,000 lb hook load using Telemast® technology and is equipped with LoadSafe XD fully-automated, hands-free pipe handling system. Rig is used for top-hole drilling and features top drive travel, operator's control room, and ability to interface with remote operating centers via satellite or Internet.
Read More »Tier 4 Excavators offer fuel efficiency, advanced instrumentation.
Powered by direct-inject, 1.7 L, naturally aspirated diesel engine, E32i conventional tail swing and E35i Zero Tail Swing excavators suit confined areas and can be equipped with optional extendable (telescoping) arm. Both 3-ton class, 24.8 hp excavators feature forward-mount instrumentation system, auto-idle throttle, and auto-shift travel, and are available with deluxe instrumentation panel that...
Read More »
Hemp: An Eco-friendly Substitute for Cotton and Petroleum-based Synthetics
To learn more about hemp's history, composition, performance, and its sustainability and cost, download this white paper now.
Read More »Fleet and Asset Management Software integrates with scales.
Integrating with LOADRITE® X2350 excavator scales and L2180 wheel loader scales equipped with Trimble® SNM940 Connected Site® Gateway, VisionLink® v2.10 gives machine operators and managers instant access to excavator and wheel loader payload information such as total bucket loads, trucks loaded, and running totals in near real-time. Combining payload weight information...
Read More »Caterpillar to Highlight Integrated Technologies and Fuel Efficiency Advancements at CONEXPO-CON/AGG 2014
Cat® products demonstrate a commitment to customers through an unmatched lineup that is BUILT FOR IT™ LAS VEGAS- Caterpillar Inc. (NYSE: CAT) is highlighting the latest technology solutions and fuel efficiency for its U.S. EPA Tier 4 Interim and Tier 4 Final construction equipment at CONEXPO-CON/AGG 2014. An estimated 125,000 show attendees will have the opportunity to experience four...
Read More »Compact Excavator features digital operator interface.
Built around 37.7 hp Yanmar Tier IV certified diesel engine, 4.5 metric tonÂ- Z45 GEN:2 includes digital operator interface that provides real-time information, service reminders, and 90 days of operating history. Standard auxiliary proportional hydraulics give operator infinitely variable control of hydraulic flow, while ECO Mode reduces engine speed by 10%, cutting fuel...
Read More »Compact Excavator features zero tail swing design.
Built around 37.7 hp Yanmar Tier IV certified diesel engine, 4.5 metric ton Model 450Z NXT2 includes digital operator interface that provides real-time information, service reminders, and 90 days of operating history. Auxiliary proportional hydraulics give operator infinitely variable control of hydraulic flow, while ECO Mode reduces engine speed by 10%, cutting fuel consumption. When hydraulic...
Read More »
Komatsu America Corp. Will Showcase Its intelligent Machine Control at CONEXPO-CON/AGG 2014
Tier 4 technology also featured Rolling Meadows, ILÂ Â – At the upcoming CONEXPO-CON/AGG 2014 in Las Vegas, NV, Komatsu America Corp. will showcase 24 models including Komatsu’s line of intelligent Machine Control (iMC) dozers and new Tier 4 Final compliant machines. There will be four iMC dozers, nine excavators, five wheel loaders, two trucks, two larger dozers, one tracked log loader...
Read More »Tier 4 Compliant Excavators employ Non-DPF emissions solution.
Medium-sized M-Series machines – conventional tail swing E42, Zero Tail Swing E45, minimal tail swing E50, and conventional tail swing E55 – includeÂ- non-DPF (diesel particulate filter) engine solution and forward-mount instrumentation system. Ultra-low particulate combustion (ULPC) engine, featuring combustion chamber that minimizes amount of particulate matter created during...
Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.
Read More »
