Evaporators

Wastewater Evaporator suits small applications.

Wastewater Evaporator suits small applications.

E-100C Hot Tube Wastewater Evaporator reduces volume of waste streams generated by manufacturing and cleaning processes. It also functions as end of line process for concentrate reduction from membrane filtration systems. Operating range is 10-17 gph. Safety features and controls include high-temperature limits, fluid-level control, and exhaust-air proving switch. Tank and tube are constructed of...

Read More »
Evaporator works with 96- and 384-well plates.

Evaporator works with 96- and 384-well plates.

Designed to facilitate dry down of 96- and 384-well microplates, ZipVap features adjustable needle height, ability to hold standard microplates or deep well plates, and flow control adjusted with fine needle valve. Heated holder can be removed for room temperature operation. Compatible with TFA, DMSO, and standard solvents, product is available in Nylon, with max temperature of 100Â-

Read More »
Wastewater Evaporator is suited for metalworking industry.

Wastewater Evaporator is suited for metalworking industry.

Natural gas-heated HBG wastewater evaporator, adaptable for liquid propane, features 60% larger combustion chamber design than previous model. Double-lid design offers access to tank. Using high-density refractory ceramic, combustion box requires 400,000 BTUH to evaporate up to 30 gal/hr. Unit provides extra 20 gal of tank capacity and reduces waste stream by up to 98%.

Read More »
Evaporators suit industrial refrigeration applications.

Evaporators suit industrial refrigeration applications.

Suited for industrial refrigeration applications, BAC Aircoil(TM) Evaporators incorporate hinged fan housings, aluminum or stainless steel drain pan construction, and integral coil/frame constructed of rectangular steel members. Housing materials are available in galvanized steel, stainless steel, or with BALTIBONDÂ-® Corrosion Protection System. They can be configured to meet performance...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
Cassette Evaporator suits high viscosity products.

Cassette Evaporator suits high viscosity products.

Automated AlfaVap(TM) concentrates process liquids that contain dissolved and finely dispersed proteins of animal or fish origin. Utilizing forced circulation, unit can be supplied as single-stage, 2-stage, or 3-stage evaporator depending on heating medium, throughput, or concentration requirements of end product. Capacities are offered from 2,000-35,000 lb/hr. Acceptable process fluids include...

Read More »
Gas Powered Evaporator reduces liquid waste volume by 95%.

Gas Powered Evaporator reduces liquid waste volume by 95%.

Model G30 features well-insulated, heavy gauge, 316L stainless steel tank, encased in 304 stainless outer skin. Heat exchanger has twin vertical plates and internal flue gas passages. Large surface area provides maximum heat transfer. Vertical plates are 95% visible for inspection and cleaning.

Read More »
Wastewater Evaporator provides 100% removal of water content.

Wastewater Evaporator provides 100% removal of water content.

Thermo Ox Series 3 Dry Chamber Flash Wastewater Evaporator eliminates need to haul wastewater and problems of corrosion and slurry removal. It leaves dry ash in coated ceramic chamber, utilizes any BTU of wastewater for fuel savings, and can use used oil as fuel. Fully automatic unit is suitable for machinery coolants, PCB waste, textiles, heavy equipment, and machinery coolants.

Read More »
Rotary Evaporator Traps clamp to flat top surface.

Rotary Evaporator Traps clamp to flat top surface.

Trap series features square bead at top outer joint to provide clamping contact with flat top surface and create seal with rotary evaporator apparatus. Design is incorporated on rotary trap models with and without drain holes as well as top sealed vapor tube model used for excessively foaming organic mixtures. Capacities from 100 to 500 mL in 14/20 and 24/40 joint sizes are available.

Read More »
Industrial Wastewater Evaporator is controlled by PLC.

Industrial Wastewater Evaporator is controlled by PLC.

SWE-II, SENTRY SYSTEM reduces complex water-based waste chemistries. Integrated PLC controls the process, maximizing volume reduction up to 99%. System has redundant safety sensors, 3 stage mist elimination, level control, and options for auto drain, auto decant, and remote modem monitoring.

Read More »
Evaporator allows evaluation of thin-film processing.

Evaporator allows evaluation of thin-film processing.

LabVap(TM) enables users to evaluate thin-film evaporation during early product development. It can be used with heating temperatures up to 650 deg F and for countercurrent or co-current operation. LabVap nozzle designs allow connections to laboratory glassware. System can be disassembled and re-assembled for ease in cleaning. Horizontal design incorporates stainless steel body and rotor, double...

Read More »

All Topics