Latest Aluminum Generator Enclosures from Panel Built Feature Fully Welded Roofing System
The Aluminum Generator Enclosures meet sound attenuation levels of 1 and 2 and has mineral wool insulation. The enclosures come with roofing system that minimizes chance of damage caused due to leaks or cracks. The aluminum design of the enclosure protects the exterior of the structure from rust damage. These products can be outfitted with standard or custom fabricated doors with panic release...
Read More »
New PB262426-12 Type-12 Printer Enclosure is Fabricated Out of 14-gauge Painted Steel
PB262426-12 Type-12 Printer Enclosure is designed to protect label barcode printers and desktop laser printers. Unit comes in 26 H x 24 W x 28 in. D dimensions that accommodates printer with maximum dimensions of 21 H x 20 W x 22 in. D. The enclosure is designed with lockable front and rear doors with removable polycarbonate window on the front door. Unit’s interior features adjustable 22 in....
Read More »
Milbank's Irrigation Pedestal feature 3-pole 480V class CC fuses.
Installed in less than an hour, Milbank's Irrigation Pedestal is pre-wired, enabling the installer to simply mount the pedestal onto the provided- slab using the lifting eyes that are pre-installed, connect the wires onto the lug landings and run them out from the motor starter. Ensuring protection from energy theft, motor connect and disconnect controls are housed in a lockable enclosure....
Read More »
Wall Rack Enclosure accommodates 19 in. rack equipment.
Featuring welded steel construction and black powder coat finish, 6U Model ERWEN-6E gets 19 in. rack equipment and accessories off floor and on wall. Unit has adjustable front and rear rails, removable hinged back panel, reversible glass door, and vented top and bottom with cable routing knockouts. Rails have numbered spaces with standard 10–32 threading. Measuring 24.3 x 21.9 x 14.5 in.,...
Read More »
Quality Assurance and Reliability in Everything We Do
Learn about SSP quality assurance metrics, certifications, warranty, and safety and delivery guarantees in our free eBook.
Read More »
Flexible Welding Enclosures® for Zero Colour Titanium Welds
When welding titanium, zirconium and some stainless steel joints it is important that the welding zone is purged of oxygen to a level as low as 10 parts per million (ppm). Flexible Welding Enclosures-® are available from Huntingdon Fusion Techniques HFT-® for a fraction of the cost of a rigid welding chamber. Flexible Welding Enclosures-® provide a solution where a rigid chamber may not be...
Read More »
Major Petrochemical Company Uses Flexible Welding Enclosure®
During the construction of a jetty, for the import of liquid natural gas (LNG) in Ecuador, Bechtel, the largest construction and civil engineering company in the USA, had a number of small stainless steel socket welds to complete. In the climate conditions there and with the small size of the welds, it was difficult to assure a good all round weld purge to avoid oxidation and the attendant...
Read More »Custom Enclosures protect wireless torque sensors.
Designed for WISER 2030-S wireless torque sensors, Custom-Built Remote Enclosures protect remote unit and Li-Poly battery from damage due to debris. Enclosures accommodate wide range of shaft diameters and can be attached with 1- or 2-hose clamps. Made of plastic with high impact strength, enclosures consist of black base and red cover for remote unit and white cover for battery. Base is...
Read More »
Enclosure Kits allow flexible transmitter mounting.
Offered in kits with hinged or flat cover, Signet 9900 Transmitter Rear Enclosures enable flexible mounting of Signet 9900-1P Transmitter onto pipes, walls, tanks, struts, at angles, or inside panels. Holes for wiring in any orientation- can be drilled on any enclosure side for further flexibility, and room is provided to accommodate all accessory modules: 4–20 mA output, batch, relay,...
Read More »
Die-Cast Aluminum Boxes feature IP68 rating.
Combining corrosion-resistant die-cast aluminum construction with continuous silicon gasket, AN-A Series can house sensitive equipment in hazardous, dusty, and washdown factory environments, as well as in wet outdoor locations. Enclosures are available in 24 sizes ranging from 3.54 x 1.42 x 1.18 in. to 10.24 x 6.30 x 3.56 in., suited for machine controls, security, lighting, instrument cases,...
Read More »
Equipment Rack Enclosure offers 1,300 lb load capacity.
Featuring usable depth of 33 in., 42 rack space EREN-42E1K works with all standard 19 in. rack equipment and accessories, including security, audio, video, and communication components. Portable, fully welded unit comes complete with integrated cooling fans, removable side panels, rails- with standard 10-32 threading, double swing steel rear door,- and tempered glass front door.- In addition...
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
