Equipment Coolers

Large Enclosure Coolers operate in environments up to 200
Equipment Coolers

Large Enclosure Coolers operate in environments up to 200

To protect sensitive electronics from hot, dirty locations, Dual High Temperature Cabinet Cooler® Systems purge and cool electrical control panels with air as cool as 20°F in environments up to 200°F. Incorporating vortex tube that cools compressed air without use of refrigerants, devices provide cooling capacity up to 5,600 Btu/hr and keep large enclosures at ±2ºF of temperature setting....

Read More »
Equipment Coolers

Purge Solutions, Vortex Cabinet Cooler Systems Designed for Hazardous Area Installation and Use

For applications where thermal management of electrical cabinets and control panels is required in hazardous areas; Purge Solutions offers Continuous Operation or Thermostat Controlled Vortex Cabinet Cooler Systems, which can provide cooling capacities to meet your application requirements and maintain a NEMA 4 or 4X (IP66) rating. Continuous Operation Vortex Cabinet Cooler Systems can be used to...

Read More »

No Fouling Risks Radiator Cooling System Designed by Trantech Radiator Products
Equipment Coolers

No Fouling Risks Radiator Cooling System Designed by Trantech Radiator Products

The Kennecott Radiator Retrofit Kennecott Copper, known originally as the Utah Copper Company, began on June 4, 1903 to mine and process low-grade copper ore found in a mountain in Bingham Canyon, about 25 miles southwest of Salt Lake City. Most experts of that day said the company would never make money-the ore grade was too low, only 39 pounds of copper per ton of ore. Steam shovels began...

Read More »
Equipment Coolers

Hamilton Sundstrand Ready for Boeing 787 Entry into Service

PARIS - PARIS AIR SHOW - Hamilton Sundstrand Corporation, the largest system supplier to the Boeing 787 Dreamliner, has been actively supporting Boeing's flight test program and is ready to support the airplane's entry into service (EIS). The airplane's first delivery to All Nippon Airways is slated to occur in the third quarter. Hamilton Sundstrand is a subsidiary of United Technologies Corp....

Read More »
Whitepaper: 7 Trends for IoT in Hospitality
Sponsored

Whitepaper: 7 Trends for IoT in Hospitality

The Internet of Things is rapidly becoming a defining characteristic in the daily landscape of human experience. Billions of smart devices are already connected to this vast system through smart homes, medical devices, and much more; the trend is predicted to continue its exponential growth into the hundred billions within the next few years. This white paper illuminates how the future of IoT will completely revolutionize the way the hospitality industry in particular will function with this new technology. Due to the ability to reduce energy costs, reduce staff labor, and create completely individualized and engaging guest experiences, the hospitality industry is in a unique position to capitalize on IoT. Using real life case studies, the report outlines seven ideas for how the IoT can be used to reduce energy consumption, increase guest satisfaction, improve maintenance, and more.

Read More »
Equipment Coolers

Emergency Fuel Pool Cooling System provides stand-alone backup.

When off-site electrical power or emergency diesel power is not available, Emergency fuel pool cooling system (EFPCS) removes decay heat from spent fuel pool during site emergencies. System consists of permanently installed, primary cooling loop inside reactor building or spent fuel pool building and mobile, secondary cooling loop stored off-site and located outside reactor building. This reduces...

Read More »
Cabinet Cooling Control minimizes compressed air use.
Equipment Coolers

Cabinet Cooling Control minimizes compressed air use.

CE-compliant digital ETC(TM) (Electronic Temperature Control) Cabinet Cooler® System keeps electrical enclosures cool while minimizing compressed air use. By maintaining constant temperature in electrical enclosure slightly under max rating of electronics, control permits just enough cooling for electronics without going so cold as to waste compressed air. Models for 120 or 240 Vac are available...

Read More »
Cabinet Coolers are designed for electrical enclosures.
Equipment Coolers

Cabinet Coolers are designed for electrical enclosures.

Cabinet Coolers provide way to purge/cool electrical control panels by circulating cold air to eliminate heat damage and control shutdown. Installed through electrical knockout hole, CE-compliant, UL-listed units convert compressed air to cold, 20°F air without refrigerants or CFCs. Cooling capacities up to 5,600 BTU/hr are available. Compact devices include compressed air filter to keep out...

Read More »

Pipe Coating Firm for Oil & Gas Industry uses Vortex A/C(TM) Electrical Enclosure Coolers to Solve Space, Heat, Airborne Contaminant Issues
Equipment Coolers

Pipe Coating Firm for Oil & Gas Industry uses Vortex A/C(TM) Electrical Enclosure Coolers to Solve Space, Heat, Airborne Contaminant Issues

Vortex Tube technology reduces cost vs. conventional air conditioners while delivering superior protection in harsh environments Panama City, FL, February 2010: Large diameter steel pipe powder coating firm EB Pipe Coating, Inc. solved persistent maintenance, cost and protection performance issues it experienced with conventional air conditioners by replacing them with the new Vortex A/C(TM) from...

Read More »
Equipment Coolers

Precision Cooling System offers energy-efficient operation.

Equipped with digital scroll compressor and electrically commutated fans, Liebert CRV cools rows of rack equipment of all heat densities in data centers of any size. It continually adjusts to changing operating conditions based on real-time temperature and humidity readings, promoting energy efficiency and effective cooling close to heat source. Available capacities include 20 and 35 kW for...

Read More »
Equipment Coolers

Cooling Process Control Panels Effectively

Over the past few decades, the use of sophisticated high density electronics within automation and process control panels has become commonplace. Thermal management and its related costs for these electronic enclosures are very important considerations in managing these valuable assets. Choosing the appropriate and most cost and energy efficient cooling solution from the many types available...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect Multi-Pocket selectable quick change tool holder, its time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and were pleased to show you why.

Read More »

All Topics