Equipment Coolers


Gore Announces Enhanced Venting and Cooling Solutions for Improved Performance at CTIA 2013
Electrical Equipment & Systems

Gore Announces Enhanced Venting and Cooling Solutions for Improved Performance at CTIA 2013

Elkton, Maryland – At the CTIA 2013™ Mobile Marketplace in Las Vegas, Nevada, May 21-23, in Booth 4234, W. L. Gore & Associates will be debuting its latest venting and cabinet cooling products that enable the telecommunications industry to remain connected and protected. Gore will be displaying new venting products and cooling filters that ensure reliability and long-lasting performance...

Read More »
Electrical Equipment & Systems

Cooling Package suits industrial engines in harsh environments.

Able to withstand cleaning with high-pressure water, Heavy-Duty Cooling Packages are available on 2013 Volvo Penta D5, D7, D13, and D16 Stage IIIB/Tier 4i engines as well as D13 and D16 Stage II engines, which cover 129–565 kW range. Systems are available as suction- and pusher-type models for all heavy-duty radiator units. Heavy-duty cable harnesses use split synthetic polyester tubing as...

Read More »
Communication Systems & Equipment

SPX and Shanghai Electric Joint Venture Receives More than $80 Million in New Dry Cooling Systems Orders

SEC-SPX JV to Supply Cooling Equipment to Four Chinese Power Plants CHARLOTTE, N.C. and SHANGHAI – SPX Corporation (NYSE: SPW) today announced that its strategic joint venture with Shanghai Electric Group Co., Ltd. (Shanghai Electric) has received new orders for dry cooling systems for four power plants in China totaling more than $80 million. Since its inception in January 2012, the joint...

Read More »
Injection Molding from 3D Printed Molds
Sponsored

Injection Molding from 3D Printed Molds

3D printing has become one of the biggest trending technological innovations of the 21st century. With its logistical efficiency, ability to easily modify designs, and speed of production, it’s no surprise that the manufacturing industry is turning to 3D printing for a multitude of applications. This white paper explores how 3D printing can be beneficial specifically for manufacturers focused on low volume injection molding of small plastic parts. The report features a succinct yet detailed overview of two case studies, both of which exhibit the advantages and possible challenges of making molds via 3D printing. The article goes on to offer advice on how such challenges can be overcome, as well as some guidelines for mold design. If you’re looking to break the mold to save time and money, download this white paper and see if 3D printing is the right solution for your business.

Read More »
Electrical Equipment & Systems

Pillar Induction Delivers 11.8MW Heating System for Austenitizing Pipe

PipePillar Induction has commissioned a new 11.8 MW induction heating installation at a leading pipe producer in the southwest United States. The new installation consists of a total of eighteen (18) induction heating coils providing progressive heating of 2.375 to 7" OD pipe with production up 35 metric tons/hr. The pipe is moved through the coils powered by a single pinch wheel drive and...

Read More »
Enclosure Cooler removes heat at up to 5,000 BTU/hr.
Electrical Equipment & Systems

Enclosure Cooler removes heat at up to 5,000 BTU/hr.

Featuring UL Certification, Dual HazLoc Vortex A/C Model 7570 effectively cools large enclosures through 2-stage process, helping to ensure that control systems and electronics do not overheat in extremely hot, hazardous industrial locations. Unit operates in environments up to 175°F and is designed to cool quietly with 62 dBA operation. System requires no wiring and ensures that no ambient,...

Read More »
Cleaning Products & Equipment

MIOX Cooling Tower Disinfection Boosts Power Plant Production by 7% and Reduces Annual Operating Costs by $34 Million

A New Award-Winning Bio-Control Approach Cleans Cooling Tower of Biofouling at a Fraction of the Cost of Bulk Hypochlorite Albuquerque, NM - MIOX Corporation, the technology leader in on-site chemical generation, announced today that a unique bio-control approach developed by exclusive distributor New Technology Systems, Inc. (NTS) has not only achieved significant savings compared to bulk...

Read More »
Air-To-Air Thermoelectric Assemblies cool outdoor enclosures.
Electrical Equipment & Systems

Air-To-Air Thermoelectric Assemblies cool outdoor enclosures.

Using impingement flow and custom thermoelectric modules to transfer heat, AA-250 Outdoor Cooler Series cools battery back-up systems susceptible to degradation when exposed to elevated temperatures or provides heat when exposed to very cold temperatures. Open-loop products, which come in 24 or 48 V configurations, do not require any maintenance and may be mounted in vertical or horizontal...

Read More »
Hazardous Location Enclosure Coolers are UL Classified.
Electrical Equipment & Systems

Hazardous Location Enclosure Coolers are UL Classified.

Operating in environments up to 175°F, HazLoc Vortex A/C Models 7515, 7525, and 7535 offer 900, 1,500, or 2,500 BTU/hr cooling capacity while operating at 62 dBA. Design of units ensures that no ambient, dirty, or humid air enters cabinet. Coolers feature safety certification for compressed air temperatures up of 120°F and are approved for Temperature Class of T4. Requiring no wiring, all...

Read More »
Direct Air Cooling System removes heat from outdoor enclosures.
Electrical Equipment & Systems

Direct Air Cooling System removes heat from outdoor enclosures.

Used for cooling electronics in outdoor applications, McLean® brand Direct Air Cooling System (DACS) comes in 4 standard models with sizes from 29-56 in. high as well as Hydrophobic GORE(TM) and MERV 12 filtration styles. Controller adjusts fan speed based on temperature, and power input options include 24, 48, 115, and 230 V. Built to meet application requirements, system is constructed to...

Read More »

All Topics