Epoxies

Epoxies

Epoxy suits opto-electronic assembly applications.

Silica-filled OPTOCAST 3421 single component adhesive is UV/heat cureable. It exhibits low shrinkage on cure (0.4%, linear) and is ionically clean (max ionic content rated at 15 ppm total Na + K+ Cl8). Result on cure is 85/85 (85°C/85% relative humidity) with 50°C DI water soak resistance. Epoxy has flexural and tensile strengths of 7,000 and 15,000 psi, respectively, and D Hardness...

Read More »
Epoxies

Pourable Epoxies suit moldmaking applications.

High-Temp Moldmaker (C-1) heat-cured epoxy liquid maintains compressive strength to 36,500 psi at operating temperatures up to 500°F. It has pot life of 90 min and achieves functional cure in 24 hr. Aluminum Liquid (F-2) aluminum-filled epoxy has low viscosity that provides accurate reproduction of mold details on delicate or intricate parts. Cured molds withstand service temperatures up to...

Read More »
Snap Cure Epoxy offers low shrinkage.
Epoxies

Snap Cure Epoxy offers low shrinkage.

Tra-Bond 2106T thixotropic epoxy is recommended for use in lower temperatures or wet industrial bonding applications that require fast cure. When fully cured, it provides electrical insulation and resistance to water, galvanic action, petroleum fuels, and many other chemicals. Epoxy develops tough bonds to metals, plastics, glass, hardboards, ceramics, rubber, masonry, and other construction...

Read More »
Epoxy System is approved for NASA outgassing specifications.
Epoxies

Epoxy System is approved for NASA outgassing specifications.

With 10:1 mix ratio by weight, EP30LTE-LO room temperature curing epoxy system has CTE of 12 x 10-6 in./in. per °C. Linear shrinkage is rated at 0.0002 in./in. per °C, thermal conductivity is 6 BTUoin./ftÂ-²ohro°F, and service temperature ranges from -60 to +250°F. Able to bond to various metals, plastics, ceramics, and glass, EP30LTE-LO passes ASTM 595 for low...

Read More »
Epoxies

Epoxy Adhesive provides die attachment.

No. 122-38(SD) single-component, silver-filled, electrically conductive adhesive is 100% solids and syringe dispensable. It offers fine pitch resolution when syringed dispensed, stencil printed, or screen-printed. Epoxy provides adhesion to gold-plated substrates, as well as tin/lead solder-terminated components. It features chemical resistance, thermal stability to 325°C, and useful...

Read More »
Adhesives for use in permanent magnet motors.
Epoxies

Adhesives for use in permanent magnet motors.

Line includes structural acrylics, 1- and 2-part epoxies, UV curable, cyanoacrylates, and anaerobic adhesives. Permabond E04 (2-part epoxy) and 465 (UV curable) are both used for wire tang reinforcements. E32 (2-part epoxy), ESP310 (1-part, heat cured epoxy), 681 (2-part acrylic), 581 (1-part acrylic used with 534 activator), 671 (2-part acrylic), and 533 (1-part acrylic used with 534 activator)...

Read More »
Epoxy Adhesive is graphite filled and electrically conductive.
Epoxies

Epoxy Adhesive is graphite filled and electrically conductive.

Two-component EP75-1 has 100 to 15 mix ratio by weight. It cures at room temperature or more rapidly at elevated temperatures. Adhesive develops bonding strength of more than 2,000 psi tensile shear when measured and cured at 75°F. Volume resistivity of cured system is 50-100 ohm cm. Adhesive contains no solvents or diluents. It is suitable for metals, glass, ceramics, vulcanized rubber,...

Read More »
Miscellaneous Compounds

Epoxy Compound features one to one mixing ratio.

Type 20-3650 electronic grade epoxy potting, casting, and encapsulating system exhibits excellent physical, thermal, and electrical insulation properties. Tensile strength is 11,000 psi and compressive strength is 15,500 psi. Compound is DOT non-hazardous, easy to mix, and will cure at room temperature or with mild heat. Operating temperature range is -60 to +150°C. Type 20-3650 is suitable...

Read More »
Epoxy Adhesive needs no mixing, cures at 175°F.
Epoxies

Epoxy Adhesive needs no mixing, cures at 175°F.

One-component Supreme 3HT-80 has high shear and high peel strength, and resists impact, thermal shock, vibration, and stress fatigue cracking. It adheres to metals, glass, ceramics, wood, vulcanized rubbers, and most plastics. Bonds resist water, oil, fuels and most organic solvents, even upon prolonged exposures. Operating temperature range is -100 to +350°F. It is 100% reactive and does...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers