Epoxies

Epoxies offer unlimited working time.
Epoxies

Epoxies offer unlimited working time.

Single-component Series SC 2000 epoxies bond metal, ceramics, glass, and other substrates. Heat-cured, self-leveling adhesives require no mixing and offer unlimited working time at room temperature. Available in 4 formulations, products provide thermal stability, corrosion resistance, and gap-filling properties. SC 2001 and SC 2003 withstand service temperatures from -40° to 300°F,...

Read More »
Epoxy Adhesive is suitable for use in high temperatures.
Epoxies

Epoxy Adhesive is suitable for use in high temperatures.

Two component, high temperature resistant epoxy adhesive, EP35, cures at room temperature. Bonds are maintained after long exposures to temperatures of 450-500°F. With 100 to 70 mix ratio by weight, product can be applied without sagging or dripping. Bond is resistant to thermal cycling and chemicals. Service operating temperature range is -60°F to 500°F, and material adheres to...

Read More »
Epoxies

Epoxy System provides moisture resistance.

With hardness rating of 84 and rated viscosity of 60,000 cps, DIEBOND 4460 resists temperatures to 110°C. Solvent-free, 2-component, 100% epoxy system cures overnight at room temperature or in 1.5-2.5 hr @ 50°C to form low stress bonds with various substrates. Minimal out-gassing occurs in applications with temperatures up to 200°C. System is available in bulk packaging as...

Read More »
Epoxies

Marine Epoxies cure in temperatures below 40°F.

LTC 38 clear, solvent-free epoxy is suitable for repair and boat building. Epoxy, with mix ratio of 3:2, cures in 20 min @ 65°F and in 2 hr @ 38°F. Corro-Coat FC 2100 FAST CURE is gray pigmented, solvent free, and Kevlar(TM) and ceramic filled. It can be applied and cured underwater. Cure occurs in water or air within 50 min @ 55°F and in 10 hr @ 38°F in water.

Read More »
Epoxies

Epoxy is formulated for extended pot life.

OPTOCAST 3410 GEN 2 ultraviolet light and/or heat curable epoxy is suitable for opto-electronic assembly. It cures rapidly when exposed to UV light in 320-380 nm range with low shrinkage. Maximum ionic content is 10 ppm total Na+, K+, and Cl-. Epoxy is ideal for fixturing and aligning optical devices with less than 1 µ movement throughout its service life. Working life at room temperature is...

Read More »
Flame Retardant Epoxy is UL-94V-0 approved.
Miscellaneous Compounds

Flame Retardant Epoxy is UL-94V-0 approved.

Rigid cure epoxy, EP-211FRHTC (Flame Retardant High Thermal Conductivity), offers thermal conductivity and flame retardancy. When cured at room temperature, it has service temperature of up to 130°C. When heat cured, epoxy withstands temperatures up to 200°C. Its viscosity provides penetration and void filling. Electrical potting and encapsulating epoxy reduces operating temperature...

Read More »
Aluminum-Filled Epoxy cures at room temperature.
Epoxies

Aluminum-Filled Epoxy cures at room temperature.

Type EP22 2-component epoxy adhesive features 1:1 mix ratio by weight or volume. It produces high strength bonds with adhesion to metals, particularly steel and aluminum. Bonds are resistant to thermal cycling and chemicals. Epoxy is readily machinable and can be employed over temperature range of -60 to 250°F. Shrinkage upon cure is low and dimensional stability is high. Cure can be...

Read More »
Epoxy bonds plastic products.
Epoxies

Epoxy bonds plastic products.

Two-part TRA-BOND 2170T is suitable for bonding nylon, PVC, polyethylene, acrylic, lexan, polypropylene, kapton, and almost any thermoplastic substrate. It is thixotropic to allow for more control over flow. Epoxy can be used for automotive, medical, aerospace, photonic, and assembly applications.

Read More »
Epoxies

Epoxy suits opto-electronic assembly applications.

Silica-filled OPTOCAST 3421 single component adhesive is UV/heat cureable. It exhibits low shrinkage on cure (0.4%, linear) and is ionically clean (max ionic content rated at 15 ppm total Na + K+ Cl8). Result on cure is 85/85 (85°C/85% relative humidity) with 50°C DI water soak resistance. Epoxy has flexural and tensile strengths of 7,000 and 15,000 psi, respectively, and D Hardness...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers