Epoxies

One Part Epoxy features low viscosity and rapid cure.
Epoxies

One Part Epoxy features low viscosity and rapid cure.

Type EP3RRLV cures in 30-35 min at 220°F and 10-15 min at 300°F. It offers electrical insulation, thermal shock and heat resistance, and protection against water and chemicals. Epoxy requires no mixing and has unlimited working life at room temperature. It bonds to metals, ceramics, glass, and most plastics. Suited for potting, encapsulation, and underfill applications, EP3RRLV has...

Read More »
Epoxy works with difficult-to-bond metals.
Epoxies

Epoxy works with difficult-to-bond metals.

TRA-BOND 868-6N3 bonds to gold, silver, copper, brass, and solder with aluminum-to-aluminum lap shear of 4,600 psi. Thixotropic properties allow it to hold its shape once applied to substrate. Epoxy cures 15 min at 75°C and in 24 hr at 25°C.

Read More »
Preforms

Epoxy Film features high electrical conductivity.

Silver conductive epoxy film and preform system, FL901S bonds to both similar and dissimilar substrates. It offers moisture, chemical, vibration, and shock resistance. Product cures quickly at moderately elevated temperatures and can be stored in refrigerator for 6 months. Low level of total ionic impurities of less than 50 ppm makes it suitable for electronic assembly applications. FL901S is...

Read More »
Thermally Conductive Epoxy suits heat exchange applications.
Epoxies

Thermally Conductive Epoxy suits heat exchange applications.

Aremco-Bond(TM) 568 2-part, 1:1 mix, aluminum-filled epoxy system provides mechanical strength and thermal conductivity to 400°F, making it suitable for bonding aluminum and copper heaters and heat sinks. Thermal conductivity is 9.0 Btu-in./hr-ftÂ-²-°F, and flexural and tensile strength is 11,400 and 2,500 psi, respectively. Aremco-Bond(TM) 568 is resistant to wide range of...

Read More »
Epoxy Adhesive suits bicycle building applications.
Epoxies

Epoxy Adhesive suits bicycle building applications.

Gap filling, sag resistant Araldite 2015 epoxy securely joins dissimilar materials used in fabricating bike accessories. It attains handling strength after 4 hours at room temperature and produces joints with lap shear strength of 3,200 psi at room temperature. Epoxy dispenses, waste-free, from 50 ml, dual barrel cartridges and handles temperatures from -67 to 250°F. Adhesive produces...

Read More »
Adhesive/Sealent has temperature range of -300 to +300°F.
Epoxies

Adhesive/Sealent has temperature range of -300 to +300°F.

Master Bond Polymer System Supreme 10HTFL one component, flexible, epoxy resin based adhesive/sealant cures to flexible thermoset polymer at temperatures of 250-300°F and above and does not require refrigeration for extended storage before use. It adheres to metallic and non-metallic substrates and exhibits tensile lap shear strengths of more than 2,000 psi and T-peels in excess of 60 pli....

Read More »
Prototyping Systems

Materials are offered in varying densities for design work.

Medium Density Epoxy SRP boards, used for creating design models, have 42 lb/ftÂ-³ density and 68 Shore D hardness. Resistant to organic solvents, they offer heat resistance greater than 284ºF. Used for creating styling models or negative molds for casting, Ultra Low Density Urethane SRP boards have 15 lb/ft³ density and 27 Shore D hardness. Suited for milling foundry...

Read More »
Water-Based Epoxy suits industrial/marine applications.
Coatings

Water-Based Epoxy suits industrial/marine applications.

Fast Clad(TM) DTM, single-coat, direct-to-metal epoxy finish, provides high film build in one coat of 4-6 mils dry film thickness. Product dries to tough gloss finish, providing corrosion and chemical resistance as well as weathering protection. Applied at 77Â-ºF, it dries to touch in 45 min and is dry to handle in 4 hr. Low-odor coating meets VOC and HAPS requirements, cleans up with water,...

Read More »
Epoxy Adhesive offers high flexibility.
Epoxies

Epoxy Adhesive offers high flexibility.

Type EP51FL 2-component, epoxy resin features 1:1 mixing ratio and cures rapidly at room temperature with setup time of 30-40 min. Epoxy is 100% reactive and no solvents or volatiles are emitted during cure. It can withstand thermal and mechanical shocks. Cured compound exhibits peel strength of more than 25 pli, elongation of >125%, and tensile strength of 1,150 psi. Mixed viscosity is...

Read More »
Epoxies

Activated Epoxy bonds dissimilar materials.

Bond-It(TM) 7050 Activated Epoxy forms high-strength bonds to Nylon, PVC, most metals, high performance composites, glass, ceramics, and combinations of dissimilar materials. In most cases, no special surface preparations are required. Cured at room temperature for 400°F service, product provides high temperature stability, and electrical, thermal, and chemical resistance.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers