Epoxies

Epoxy Adhesive bonds to similar and dissimilar substrates.
Epoxies

Epoxy Adhesive bonds to similar and dissimilar substrates.

Two-component, nickel-filled, electrically-conductive adhesive, Type EP76M features volume resistivity of 5-10 ohm-cm and thermal conductivity of 8-9 BTU/in./ftÂ-²/hr/°F. Product develops tensile shear strength of 2,000 psi when measured and cured at room temperature. Adhesive is 100% reactive, does not contain dilutents or solvents, and offers thermal shock and chemical resistance....

Read More »
Epoxy Adhesive cures in 5 minutes.
Epoxies

Epoxy Adhesive cures in 5 minutes.

With 1:1 mix ratio, EP51ND 2-component epoxy adhesive can be applied on vertical surfaces without dripping or flowing. It spreads evenly and smoothly, and only contact pressure is required for cure. Product gels in ~5 min and cures fully at ambient temperatures. Bonded parts can be safely handled within Â-½ hr. Adhesive exhibits thermal shock and chemical resistance, and hardened product...

Read More »
Epoxies

Flexible Adhesive provides sag resistance.

Amber-colored, medium-viscosity LX30068 cures at room temperature, and offers heat cure option for applications where accelerated cure is desired. Rubber-like epoxy bonds difficult-to-bond materials in addition to traditional metals, plastics, and ceramics. It performs at high temperatures during thermal cycling and long-term exposures.

Read More »
Epoxy Adhesive produces clear bond lines.
Epoxies

Epoxy Adhesive produces clear bond lines.

Offering 55 min work life, UV-absorbing Araldite® AAY-8591 resin/HY-8591 hardener system cures after 60 min at 158°F, 20 min at 212°F, or 5 min at 302°F. With elevated temperature cure, it exhibits lap shear strength of ~2,200 psi and Shore hardness of 65D. Low-viscosity, easy-to-spread epoxy bonds glass to glass and metals to ceramics. It is suited for manufacturing...

Read More »
Epoxy Adhesive provides rapid cure time.
Epoxies

Epoxy Adhesive provides rapid cure time.

Thermally-conductive TRA-BOND 224-8 can cure in 4 hours at room temperature or as short as 3 min at 95°C. It offers 30 min work life and shelf life up to 1 year. Viscosity of 20,000 cp ensures that adhesive will flow into most small voids and creases. Combined with electrical insulator, product is suited for encapsulation, component staking, and sealing. Package options include BI-PAX and...

Read More »
Epoxies

Ceramic-Filled Epoxy protects parts from corrosion/wear.

Ceramic Coat® epoxy system is formulated to repair, rebuild, and protect surfaces subject to corrosion or wear, negating need for replacement parts. After reframing, damaged blades can be rebuilt to original specifications with trowelable CT 3000® and then protected with brushable Ceramic Coat 4000®. Applications include pump casings, impeller blades, suction plates, gate and...

Read More »
Epoxy System repairs cast iron and steel to 450°F.
Epoxies

Epoxy System repairs cast iron and steel to 450°F.

Pyro-Putty(TM) 657 repairs pin holes, cracks, and defects in cast iron and sheet metal prior to painting and powder coating. Stainless steel filled, 1-to-1 mix epoxy system provides continuous and intermittent temperature limits of 400 and 450°F, respectively. Dispensable, thixotropic paste cures fully at room temperature in 4-6 hr; cured material exhibits tensile shear strength of 1,860 psi...

Read More »
Machinable Liquid Metals repair, rebuild, and bond.
Putty

Machinable Liquid Metals repair, rebuild, and bond.

Durabond RK454 High Temperature Epoxy Putty cures in 24 hr at room temperature or 2 hr at 250°F to form machinable material for use up to 500°F. Durabond 7025, rated to 1,000°F, is formulated with active aluminum metal for resistance to corrosion, erosion, chemicals, and solvents. It cures in 24 hr at room temperature or 2 hr at 250°F. Durabond 7032 Stainless Steel-Ceramic composite...

Read More »
Epoxy Adhesive operates at temperatures to 125°C.
Epoxies

Epoxy Adhesive operates at temperatures to 125°C.

Tra-Bond 2103 2-part, medium viscosity, near transparent adhesive provides rigid sealing, laminating, and bonding. It bonds well to ceramics, metals, glass, composites, and most rigid plastics. Able to cure in 24 hr at room temperature, epoxy cures faster at elevated temperatures.

Read More »
Epoxy Adhesive suits high-temperature applications.
Epoxies

Epoxy Adhesive suits high-temperature applications.

Heat-resistant, one-part, solvent-free TRA-BOND 77-1S has glass-transition temperature of 200°C and withstands 1,000 hr at 100°C and 95% RH. It has working life of 3 months at 25°C and smooth consistency. Dispensed through fine-diameter needles, adhesive does not sag or tail. Cured product has lap shear strength of 2,400 psi and 94 Shore D hardness. Applications include...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers