Epoxies

Epoxy Adhesive/Sealant/Coating is chemical-resistant.
Coatings

Epoxy Adhesive/Sealant/Coating is chemical-resistant.

Featuring thermal stability, 2-component EP21ARHT-1 is 100% reactive and does not contain any solvents or diluents. It has 2:1 mix ratio by weight and cures at room temperature. Exhibiting minimal shrinkage upon cure, product does not sag or drip on vertical surfaces. Designed to withstand thermal shock and abrasion, it adheres to metals, glass, ceramics, cements, woods, vulcanized rubbers, and...

Read More »
Epoxy Adhesive suits cryogenic applications.
Epoxies

Epoxy Adhesive suits cryogenic applications.

Two-component, EP51FL epoxy resin system features 1:1 mix ratio, cures rapidly at room temperature, and has setup time of 30-40 min. Product is 100% reactive and emits no solvents or volatiles during cure. It bonds to metals, glass, ceramics, wood, various rubbers, and most plastics. Cured compound exhibits peel strength of more than 25 pli along with elongation of greater than 125%. Offering...

Read More »
Epoxy adheres to glass, polycarbonates, and acrylics.
Epoxies

Epoxy adheres to glass, polycarbonates, and acrylics.

Suited for bonding, sealing, coating, encapsulation, and casting, EP30P transparent, 2-component epoxy system cures at room temperature, which can be accelerated by use of heat. Electrically insulating, 100% reactive system contains no solvents or diluents and exhibits minimal linear shrinkage upon cure. With tensile strength that exceeds 9,500 psi, product has mixed viscosity of 1,200-1,400 cps...

Read More »
Epoxy provides high thermal conductivity.
Epoxies

Epoxy provides high thermal conductivity.

Type EP34AN room temperature cure, 2-component epoxy adhesive/sealant, with thermal conductivity of 22-24 BTU/in/ftÂ-²/hr/°F, maintains physical properties after prolonged exposure to temperatures from 400-450°F. It exhibits dimensional stability and electrical insulation properties and can be applied without sagging or dripping. Able to bond to various substrates, 100% reactive...

Read More »
Room Temperature Curing Epoxy withstands sterilization.
Epoxies

Room Temperature Curing Epoxy withstands sterilization.

Dual-component EP42HT-2 epoxy adhesive, sealant, coating, and casting material withstands repeated sterilizations, including radiation, ethylene oxide, chemical sterilants, and steam. Featuring service operating temperature range of -60 to +450°F, product exhibits chemical resistance and Shore D hardness greater than 75. Properties include mixed viscosity of 3,500 cps and tensile strength...

Read More »
Miscellaneous Compounds

Epoxy Mold Compound suits SIP applications.

Hysol® GR9810 is used as overmold on laminate-based molded array packages including SIP and flip-chip packages. Flat nature of product allows entire package to be processed in non-warped state. Non-antimony, non-bromine, non-phosphorous compound can also underfill small ICs and passive components. It is capable of achieving JEDEC Level 2 requirements at 260°C reflow temperature.

Read More »
Epoxy Adhesive/Encapsulant is flame retardant.
Encapsulants

Epoxy Adhesive/Encapsulant is flame retardant.

Self-extinguishing, 5 Minute® Epoxy FR fills gaps and bonds rigid substrates such as metals, glass, ceramics, concrete, and wood. Mixed as dispensed, product has 115,000 cps viscosity, 3-5 min working time, 10-15 min fixture time, and 2-3 hr functional cure time. Once cured, it offers tensile shear strength of 2,800 psi on cold-rolled steel and dielectric strength of 490 V/mil. Bonds...

Read More »
Epoxy Adhesive/Sealant resists temperatures up to 600°F.
Epoxies

Epoxy Adhesive/Sealant resists temperatures up to 600°F.

One-component, heat-curing, EP17 offers service operating range of -300 to +600°F and cures in 60-90 min at 300-350°F. Product bonds to metals, glass, ceramics, vulcanized rubbers, and plastics. Chemical-resistant EP17 has Shore D hardness greater than 90, compressive strength greater than 13,000 psi, and tensile strength of 8,700 psi. Flowable paste is 100% reactive, does not contain...

Read More »
Epoxies

Epoxy Syntactics feature rapid setting times.

Formulated in light blue, black, orange, and gray, Epocast 1633 epoxy syntactic materials are self-extinguishing and halogen-free. They have 2-5 min work life, are extrudable, and permit insert handling in less than 1 hr at room temperature. After gelling at 77°F and curing for 5 hr @ 120°F, or 2 hr @ 150°F, products exhibits compressive strength of 6,500 psi, lap shear strength...

Read More »
Repair Epoxy provides 450°F machinable instant metal. Cotronics Corp.
Epoxies

Repair Epoxy provides 450°F machinable instant metal. Cotronics Corp.

Bond-It(TM) 7056AL is filled with activated, aluminum metal creating fast-set, machinable, repair epoxy. With 1:1 mixing ratio, product is dispensed, mixed, and troweled on without running, dripping, or sagging. It cures at room temperature without objectionable or sulphur odors and hardens in 4-8 min. Bond-It 7056AL adheres to smooth, rough, or porous surfaces, including most plastics, metals,...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers