Epoxies

Epoxies

Epoxy Adhesive suits specialized electronics applications.

Silver-filled, 2-part EP-600 attaches components, such as resistors, LEDs, and grounding wires to metal and plastic substrates where high temperature curing cannot be used. Electrically conductive product cures at temperatures from 20-140°C with cure times from 48 hr to 2-6 min, depending on temperature. Available in pre-weighed pouches, EP-600 works in high-speed automated dot dispense and...

Read More »
Electrically Conductive Epoxy offers low-temperature cure.
Epoxies

Electrically Conductive Epoxy offers low-temperature cure.

Silver-filled, 2-part epoxy adhesive (EP-600) is designed to attach electrical components to metal/plastic substrates. It accelerates manufacture of PTF circuits built on temperature-sensitive substrates and cures at temperatures from 20 to 140°C with times from 48 hr to 2-6 min; snap cure times are possible at higher temperatures. Elasticity allows for differences in thermal expansion...

Read More »
Epoxies

KNOT-TEC(TM) Wood Repair System at the International Woodworking Fair

Power Adhesives showed, demonstrated and introduced its advanced KNOT-TEC(TM) wood repair system at the International Woodworking Fair (IWF) in Atlanta, GA August 20-23, 2008. The unique KNOT-TEC(TM) wood repair system from Power Adhesives lets manufacturers, home builders, remodelers or do it yourselfers use an entire board rather than cut it before a knot or defect to eliminate waste, increase...

Read More »
Inks

Conductive Inks/Adhesives suit thin film photovoltaic cells.

Adhering to variety of transparent conductive oxides, Silver Conductive Inks and Adhesives operate in high humidity environments and provide optimal environmental aging. Inks are used in grid lines and buss bars printed onto TCO's in thin film solar cells, while adhesives connect multiple solar cells to build arrays. Two-component 118-09A/B187 ink offers 0.0005 W-cm volume resistivity, while...

Read More »
Two Component Epoxy Adhesive cures at room temperature.
Epoxies

Two Component Epoxy Adhesive cures at room temperature.

Available in Â-½ pint, pint, quart, gallon, and 5 gal kits, Master Bond EP30 features low viscosity, chemical resistance, dimensional stability, hardness, optical clarity, and electrical insulation properties. It is used in potting and encapsulating electronic components as well as in bonding optical elements, and has adhesion to metals, ceramics, glass, and plastics. EP30 has lap shear...

Read More »
Epoxies

Epoxy Adhesive is designed for SMT stencil assembly.

Able to cure in 30 min @ 150°F, 10-3022 is used to bond polyester mesh to aluminum frames and stainless steel foil to polyester mesh. Adhesive forms impact-resistant bonds and retains strength after cleaning stencils. Featuring 2:1 by volume mix ratio, product also exhibits resistance to shock, vibration, and flexing. In addition to 50, 200, and 400 ml TriggerBond® dual barrel...

Read More »
Epoxy Adhesive bonds sensors to CNC machine tools.
Epoxies

Epoxy Adhesive bonds sensors to CNC machine tools.

Suited for aerospace manufacturers, ASTM E-595 compliant Aremco-Bond(TM) 631 two part, modified epoxy has tensile shear strength of 3,000 psi as measured by ASTM D1002-94, volume resistivity and dielectric strength of 1.2 x 1,014 Wcm and 440 V/mil respectively, and maximum operating temperature of 204Â-ºC. It features total mass loss of 0.75% at 125ºC, and collected volatile...

Read More »
Applicators

Ellsworth Adhesives to Showcase Key Suppliers' Technologies at Assembly Technology Expo 2008

Germantown, WI - Ellsworth Adhesives, a leading global provider of adhesives, specialty chemicals and engineered solutions will exhibit technologies from leading suppliers at the 2008 Advanced Technologies Expo, September 23-25, 10 a.m. - 4 p.m., daily at the Donald E. Stephens Convention Center in Rosemont, IL, booth 444. This event offers attendees an outstanding opportunity to keep pace with...

Read More »
New Cost Effective, High Conductivity Epoxy
Epoxies

New Cost Effective, High Conductivity Epoxy

HACKENSACK, NJ - Aug 19, 2008 - Master Bond Polymer System EP79 is a novel, cost effective, silver-coated-nickel filled epoxy featuring exceptionally low electrical resistance. Volume resistivity is less than 0.04 ohm-cm at room temperature. EP79 has a convenient 1:1 mix ratio and cures readily at room temperature or more rapidly at elevated temperatures. When cured, it forms strong, tough bonds...

Read More »
Epoxies

Adhesives have operating temperature range of -55 to 230°C.

Offered for variety of application techniques such as screen-printing, pad-printing, stencil application, and B-staged films, 118-06 series of single-component, electrically conductive, epoxy adhesives are also available as adhesive films, pre-cast on release liner at dry thicknesses ranging from 10-125 microns. B-staged adhesive films are already partially cured and can complete cure with exact...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers