Epoxies

Epoxy Potting Compound has low viscosity formulation.
Encapsulation Equipment

Epoxy Potting Compound has low viscosity formulation.

Formulated for electronic potting and encapsulating applications, Type 20-3060 Epoxy flows quickly in and around electronic components, self levels, releases air bubbles, and provides smooth, glasslike finish. It offers electrical insulation, chemical resistance, and protection from environment. Potting compound is available in quarts, gallons, and 5 gal pails.

Read More »
Conductive Electrical Adhesive suits applications to 500°F.
Epoxies

Conductive Electrical Adhesive suits applications to 500°F.

Offering alternative to silver-filled, electrically conductive epoxies, nickel-filled Duralco 122 cures at room temperature in 16-24 hr at 75°F or can be fast cured in 10 min at 200°F. Resistant to moisture, chemicals, and solvents, 2-part epoxy bonds well to glass, ceramics, plastics, dissimilar materials, and metals, including steel, stainless, aluminum, and lead. It is suited for...

Read More »
Thermal Conductive Epoxy Adhesive cures at room temperature.
Epoxies

Thermal Conductive Epoxy Adhesive cures at room temperature.

Exhibiting thermal conductivity and electrical insulation properties, EP21TCHT-1 offers service operating temperature range of 4 K to 400°F. It adheres to metals, ceramics, woods, vulcanized rubbers, and most plastics, and provides bonds resistant to water, fuels, and most organic solvents. NASA qualified for low outgassing applications, adhesive is suited for use in vacuum environments....

Read More »
Radio-Opaque Medical Adhesive in the Service of Radiographic Imaging
Epoxies

Radio-Opaque Medical Adhesive in the Service of Radiographic Imaging

4/22/2009 Master Bond EP21BAS is an innovative radio-opaque epoxy adhesive approved for use in the manufacture of medical instruments and devices. This low viscosity two-part epoxy cures at room temperatures and produces high strength bonds, seals and coatings. Primarily it is used for blocking electromagnetic radiation and in radiographic medical diagnostic procedures for X-ray marking of...

Read More »
Epoxies

Permabond ET505 High Strength Epoxy Eases Production Process

SOMERSET, NJ - Permabond® Engineering Adhesives ET505 is a two-component structural epoxy adhesive that is part of the ET500 line. ET505 has exceptional adhesion, durability and toughness and is ideal for demanding applications on a wide variety of substrates. ET505 is a 1:1 mix ratio, available in a dual cartridge for dispensing directly onto the components. The long, one hour pot life,...

Read More »
Permabond® Engineering Adhesives Introduces High Strength Single Part Epoxies
Epoxies

Permabond® Engineering Adhesives Introduces High Strength Single Part Epoxies

SOMERSET, NJ - Permabond's structural adhesives line includes five new epoxy formulations. Each one-component epoxy provides high strength and high temperature resistance, and all are cured with heat. The products offer choices in viscosity, color, gap fill and cure speed, and were added to meet the demand for high heat resistance in structural bonds and applications in which a one-component...

Read More »
Halogen-Free Adhesives suit assembly of handheld electronics.
Epoxies

Halogen-Free Adhesives suit assembly of handheld electronics.

Loctite® line of halogen-free adhesives and sealants are formulated to contain less than 900 ppm bromine and chlorine as well as 1,500 ppm total halogens. Product range includes cyanoacrylates, light cure cyanoacrylates, epoxies, urethanes, UV acrylics, silicones, hot melts, two-part acrylics, and anaerobics used for bonding, sealing, gasketing, and mounting range of components. All meet...

Read More »
Epoxies

Halogen-Free Adhesives meet IPC IEC #61249-2-21 requirements.

Formulated to contain less than 900 ppm bromine and chlorine, and 1,500 ppm total halogens, Loctite® adhesives are designed for assembly of handheld electronics such as cell phones, PDAs, notebook/laptop computers, and hard disk drives. Adhesives help eliminate environmental concerns and create green products.

Read More »
Resins

Huntsman to Feature High-Performance Materials at Composites & Polycon 2009

Huntsman Advanced Materials will highlight its full range of resins, hardeners and formulated systems for fabricating composite parts used in aerospace, transportation, recreation and wind power applications at Composites & Polycon 2009, Booth #1721, Tampa, Florida, January 15 - 17, 2009. Among the primary product lines on display will be patented new nano-toughened epoxy systems for infusion...

Read More »
Epoxies

Krylon Products Group to Exhibit Full Range of Concrete and Masonry Solutions at World of Concrete 2009

LAS VEGAS, January 15, 2008 - Krylon Products Group will exhibit its comprehensive line of solutions for the concrete and masonry industries at World of Concrete, February 3-6, 2009, at the Las Vegas Convention Center, Las Vegas, Nev. Krylon will exhibit a full range of floor cleaners and epoxies specifically engineered for use in the concrete and masonry markets, including the following: o...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers