Epoxies

Low Thermal Expansion Epoxy passes NASA low outgassing tests.
Epoxies

Low Thermal Expansion Epoxy passes NASA low outgassing tests.

Formulated with blend of polymeric and inorganic materials, 100% reactive EP30LTE-LO is used for bonding, sealing, casting, and coating applications. This 2-component epoxy exhibits dimensional stability and is serviceable over -60 to +250°F range. CTE is 12x10-6 in./in./°C, and shrinkage rate is less than 0.0002 in./in. Producing bonds with tensile strength over 5,000 psi,...

Read More »
Flexible Epoxy withstands cryogenic conditions.
Encapsulation Equipment

Flexible Epoxy withstands cryogenic conditions.

Serviceable over wide range of 4 K to 250°F, Polymer System EP37-3FLF cures at room temperature in 2-3 days or faster at elevated temperatures. Optically clear, 2-component epoxy offers non-critical 1:1 mix ratio and low mixed viscosity of 1,400-1,500 cps. With bond shear strength exceeding 2,000 psi and T-peel strength of 25 pli, flexible epoxy bonds to metals, glass, ceramics, rubber, and...

Read More »
Chemically Resistant Epoxy withstands one year in sulfuric acid.
Coatings

Chemically Resistant Epoxy withstands one year in sulfuric acid.

Used for coating, lining, bonding, or sealing, EP21AR withstand acidic environments - including immersion in 96-98% sulfuric acid and 36% hydrochloric acid for over one year. This 2-component epoxy, with dielectric strength of 400 V/mil, also acts as electrical insulator and is serviceable from -60 to +275°F. It produces abrasion-resistant bonds with tensile strength over 10,000 psi, shear...

Read More »
Thermal Epoxy Adhesive serves thermal management applications.
Epoxies

Thermal Epoxy Adhesive serves thermal management applications.

Formulated for use in manufacture of computer components and LEDs, 109-12 Thermally Conductive Low-Stress Epoxy is resistant to thermal-cycling and exhibits minimal shrinkage during cure. Thermal adhesive, used to interface between heat-producing component and heat-sink in electronics designs, has viscosities of 500,000 cps at room temperature or 60,000 at 50°C. This reduces air entrapment,...

Read More »
Silver Conductive Epoxy Meets NASA Low Outgassing Standards
Epoxies

Silver Conductive Epoxy Meets NASA Low Outgassing Standards

HACKENSACK, NJ - Master Bond EP21TDCS-LO is an electrically conductive silver-filled epoxy that passes ASTM 595 for NASA low outgassing specifications. It is widely used for demanding applications in the electronic, electrical, computer, semiconductor, aerospace and optical industries. The adhesive cures at room temperature in 24-48 hours and in just 1-2 hrs at 200Â-ºF, producing tough high...

Read More »
Structural Epoxy Adhesive resists high temperatures.
Epoxies

Structural Epoxy Adhesive resists high temperatures.

Formulated for structural applications in extreme environments with temperatures from -80 to +425°F, Master Bond Supreme 33 bonds to metals, glass, ceramics, wood, vulcanized rubbers, and many plastics. Toughened 2-component adhesive resists thermal cycling, thermal shock, and impact as well as water, oil, and many organic solvents. Designed to cure at room temperature in 48-72 hr, 100%...

Read More »
Epoxy Adhesive features single-component, non-drip formula.
Epoxies

Epoxy Adhesive features single-component, non-drip formula.

Designed to bond to similar and dissimilar substrates, Master Bond EP13ND requires no mixing, has unlimited working life at room temperature, and features service operating temperature of -60 to 450°F. Product cures at temperatures of 300-350°F in 60-90 minutes. Upon cure, adhesive obtains tensile shear strengths in excess of 3,500 psi at 75°F. Formula is 100% reactive, does not...

Read More »
Thermally Conductive Epoxy also offers electrical insulation.
Coatings

Thermally Conductive Epoxy also offers electrical insulation.

With thermal conductivity over 22 BTU/in/ftÂ-²/hr/°F and serviceability from -60 to +400°F, EP21ANHT helps mitigate issues associated with tightly packed components and miniaturized electronic circuits. This 2-component adhesive, sealant, and coating has 1:1 mix ratio by weight or volume and cures at room or elevated temperatures. Also able to act as electrical insulator, cured...

Read More »
Two-Part Epoxy Adhesive/Sealant is cryogenically serviceable.
Epoxies

Two-Part Epoxy Adhesive/Sealant is cryogenically serviceable.

Formulated for applications subject to temperature cycling, vibration, and mechanical shock, EP21TDCHT-LO withstands cryogenic temperatures and meets NASA low outgassing specifications. It offers 1:1 mix ratio by weight or volume and cures at room temperature or more rapidly at elevated temperatures. Properties include 4K to +350Â-ºF service temperature range, shear strength exceeding 2,500...

Read More »
Epoxies

H.B. Fuller Adhesives Earn NSF Certification

ST. PAUL, Minn. -- H.B. Fuller Company (NYSE: FUL), a leading global adhesives provider, has received notification from NSF International that two of its potting compounds (FE7811 Epoxy and UR2187 Polyurethane) for hollow fiber water filtration have been tested and certified by NSF to NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects. While H.B. Fuller has had the adhesive...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers