Commercial Power Engines come in vertical shaft models.
Vanguard(TM) V-Twin BIG BLOCK(TM) air-cooled engines are offered in vertical shaft models, 895 and 993 cc, for powering commercial applications. Along with centrifugal, multi-stage industrial air cleaner, engines incorporate debris management system that allows for cool and clean operation. Both models, based on V-Twin/Overhead Valve technology, feature aluminum block and steel-backed aluminum...
Read More »
LED Drivers suit general lighting applications.
Suited for low-power applications, Xitanium(TM) 350 and 700 mA Drivers support 1-3 Luxeon I models, 1-2 Luxeon III models, or 1 Luxeon V model as well as market-equivalent LEDs. Units carry CSA listing and feature UL Class 2 rating with inherent short-circuit protection. Tightly regulated output of 1% line and 5% load insures consistent light output regardless of line conditions, load levels, and...
Read More »GE Energy to Provide LM6000-PD Aeroderivative Gas Turbine for One of the Largest Independent Power Producers in the Czech Republic
HOUSTON, TEXAS-September 20, 2006-One of the most modern heat and power complexes in the Czech Republic will receive a GE Energy LM6000-PD SprintÃ-® aeroderivative gas turbine generator set. GE will provide Skoda Praha, a Czech power engineering company, with the gas turbine for installation at the Kladno gas turbine plant located in an industrial park west of Prague. Kladno's existing...
Read More »Pratt & Whitney, MTU Aero Engines Complete First Production PW6000
EAST HARTFORD, Conn., Sept. 22 / -- Pratt & Whitney, a division of United Technologies Corp. (NYSE:UTX), and MTU Aero Engines have completed assembly of the first production PW6000 for the Airbus A318. The engine, finished at MTU's facility in Langenhagen, Germany, will power the first A318 delivered to LAN Airlines of Chile. The ramp up to production of the PW6000 has gone very well and delivery...
Read More »
Epoxy Crusher Backing Solutions for Construction Aggregate & Ore Mining Applications
This white paper provides a guide to epoxy crusher backing solutions for construction aggregates and ore mining applications.
Read More »Iveco Motors of North America Displays Their Series of Diesel Gen-Drives for Power Generation Applications
At Power-Gen International, November 28-30, 2006, Orlando, FL, Booth #2246 ORLANDO, FL (November 28-30, 2006)- IVECO MOTORS of North America, Inc., a Fiat Powertrain Technologies (FPT) brand, proudly displays their NEF, Cursor and Vector Gen-Drives at Power-Gen International, Orlando, FL, at the Orange County Convention Center, November 28-30, 2006, booth #2246. The current product range of IVECO...
Read More »
Aircraft Engine Simplifying Diffuser Manufacturing and at an Affordable Cost
diffuser- a critical, but difficult to produce shape that spreads the air flow and cools hot section parts. Beaumont Machine, the Innovator in Fast Hole EDM, announces their revolutionary Two-Step Diffuser Process*. Diffuser shapes have become a daunting challenge for aircraft engine OEMs and their suppliers. In most production environments, diffuser shapes are generated on a EDM sinker after a...
Read More »First GP7200-Powered Airbus A380 Takes Its First Flight
TOULOUSE, France, Aug. 25 // -- The GP7200-powered Airbus A380 completed its first flight today, beginning the ten-month flight-testing program that will lead to certification of the aircraft-engine combination by the European and U.S. airworthiness authorities in 2007. The flight took place at Blagnac International Airport, adjacent to Airbus headquarters in Toulouse. We are thrilled to see the...
Read More »
John Deere PowerTech Plus(TM) 13.5L Engine Earns EPA Tier 3 Certification
February 2006 Waterloo, Iowa - John Deere Power Systems recently announced that the PowerTech Plus(TM) 13.5L engine has been Tier 3 certified by the Environmental Protection Agency (EPA). The 13.5L engine is the fourth model in the John Deere line to receive Tier 3 certification, joining the PowerTech Plus 4.5L, 6.8L, and 9.0L engines. With all four engines in the PowerTech Plus family now...
Read More »New 'Rocket Engine of the Future' goes to 'Mainstage'
CANOGA PARK, Calif., July 19 / A new rocket propulsion technology demonstration has marked an important milestone, achieving mainstage or constant full-power performance for the first time. Called the Integrated Powerhead Demonstration, or IPD, this development project combines the very latest in rocket engine propulsion technologies. To date, the IPD has conducted 21 of 26 tests and accumulated...
Read More »Pratt & Whitney F135 Program Reaches 5,000 SDD Test Hours, Remains on Track to Support JSF's First Flight
EAST HARTFORD, Conn., April 24 -- Pratt & Whitney's F135 engine program has achieved more than 5,000 hours of System Development and Demonstration (SDD) ground testing and is on schedule to support the first flight of the F-35 Joint Strike Fighter (JSF) this fall. The 5,000 SDD hours are in addition to the more than 3,600 hours accumulated during the concept demonstration phase of the F-35...
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
