End Mills

Carbide End Mills suit mold/die, general milling applications.
End Mills

Carbide End Mills suit mold/die, general milling applications.

Lending to roughing and finishing cutting capabilities, Top Cut™ end mills are made of micro-grain carbide and feature relief ground cutting edges. Variable helix flute technology, variant of high heat-resistant TiAlN coating, and internal coolant capabilities promote efficient material removal with minimal vibration and wear. Offered in various styles and geometries as well as metric and inch...

Read More »
Milling Inserts meet general purpose and heavy machining needs.
End Mills

Milling Inserts meet general purpose and heavy machining needs.

Available in screw-on, end mill, and shell mill options with internal through coolant, KenFeed™ 2X Milling Inserts are suited for pocketing, ramping, and helical interpolations with Z-plunge capabilities. Each double-sided trigon insert offers 6 cutting edges to deliver 2x cutting power of conventional inserts. Customers may choose HD insert geometry for steels, high-strength steels, and cast...

Read More »
Seco to Spotlight Advanced Cutting Tools for Composites at JEC Americas Show
End Mills

Seco to Spotlight Advanced Cutting Tools for Composites at JEC Americas Show

Troy, Michigan - At the JEC Americas 2012 Composites Show, taking place Nov. 7 - 9 in Boston, Mass., Seco Tools will spotlight advanced solutions for efficiently machining composite parts in booth D 50, including products from its Jabro(TM) and Feedmax(TM) lines. Developed to meet the rise in composite machining applications, the new Jabro JC800 family of solid carbide milling cutters - JC840, JC...

Read More »
Multi-Material End Mills suit roughing, finishing, and profiling.
End Mills

Multi-Material End Mills suit roughing, finishing, and profiling.

Available in variety of component sizes and shapes, Multi-Material End MillsÂ- minimize requirement to change tools for every different operation. Units feature reinforced end teeth to avoid premature chipping, cylindrical land width, and flat relief for maximum stability. Coating on insert grade GC1630 is extremely resistant to wear and is especially suitable for roughing and finishing dry...

Read More »
End Mill is designed for center cutting.
End Mills

End Mill is designed for center cutting.

VariMill II ER™ end mill features eccentric relief with edge strength supporting high feeds and metal removal rates. SAFE-LOCK™, available on tools with greater than Â-½ in. dia, provides optimal stability while eliminating pull out. Unit is engineered with 5 unequally spaced flutes. It can be used for titanium or stainless steel machining and is capable of slotting, ramping, and...

Read More »
Solid Carbide End Mills boost efficiency with clamping interface.
End Mills

Solid Carbide End Mills boost efficiency with clamping interface.

Addressing pull-out or micro-creep problems, Walter Prototyp 12–40 mm dia solid carbide end mills with Haimer Safe-Lock™ clamping systemÂ- optimize efficiency in demanding and high-speed machining applications. Safe-Lock’s carrier elements, with spiral grooves ground into tool shank and in combination with friction locking in chuck, provide positive locking as well as...

Read More »
Shoulder Mill supports roughing and finishing applications.
End Mills

Shoulder Mill supports roughing and finishing applications.

Available in 3 grades to cover various applications and conditions, Mill 1-7™ is suitable for small diameter shoulder-, ramp-, slot-, plunge-, and helical milling, all while using single insert. Positive rake of insert provides soft action and low cutting forces for smooth entry and exit from component. Elliptical cutting edges are optimized with straight 90° wall and true 0° lead,...

Read More »
End Mills cut Inconel 718, Titanium, and stainless steels.
End Mills

End Mills cut Inconel 718, Titanium, and stainless steels.

Featuring heat-resistant TiN/TiAlN coating, TiNox-Cut seriesÂ- has variable flute spacing and serrated chip breaker profile along cutting edge that optimize material removal rate and RA values for roughing and semi-finishing while also minimizing tool wear. Design maximizes material removal rate and tool life when machining nickel alloys, such as Inconel 718, Nimonic, and Waspaloy; Titanium...

Read More »
Solid Carbide End Mill is suited for machining ISO M materials.
End Mills

Solid Carbide End Mill is suited for machining ISO M materials.

Featuring 4-flute cutter with 2 internal helical coolant channels, Walter Prototyp Proto•max™ Inox suits applications involving stainless steel and other materials. Micro geometry increases wear resistance and protects against edge build up while providing for smooth workpiece finish, while unequal helix angles (35° and 38°) minimize vibration during operation. This end mill, with...

Read More »
IMCO Tool Helps Oilfield Instrument Maker Hit Paydirt - Again - Cutting Inconel Parts
End Mills

IMCO Tool Helps Oilfield Instrument Maker Hit Paydirt - Again - Cutting Inconel Parts

M706 Series Omega® end mill takes HEM toolpath for another productivity hike. PERRYSBURG, Ohio, USA - Gilbert Boquet (bō-kay) keeps his eyes open for new opportunities to shave time and tool costs, especially when the parts in production are made with 718 Inconel. This time, though, he went back to the IMCO M706 Series Omega end mills that had given him 400% more parts per tool in Inconel,...

Read More »

All Topics