End Mills

Endmill is suited for finishing in hardened steels.
End Mills

Endmill is suited for finishing in hardened steels.

Designed for finishing of dies and molds made of steel harder than 47 HRc, GC1610 CoroMill Plura carbide endmill provides direct machining in pre-hardened materials in single set-up. PVD-coated product with Pluratech quality is available in standard diameters ranging from 0.4-25 mm. Combination of solid carbide tooling solutions suits variety of milling including applications for tool and die and...

Read More »
Ball Nose Finishing Endmill targets die and mold industry.
End Mills

Ball Nose Finishing Endmill targets die and mold industry.

Equipped with P10A inserts, CoroMill Endmill enables high-speed finishing to super finishing of profiles. Inserts are screw clamped into high security seats, ensuring stability during high-speed machining. Available in diameters from 8-32 mm, device uses 2 active edges for optimized surface quality. It can be coupled with CoroGrip chucks for precision from spindle nose to cutting edge.

Read More »
End Mills

End Mills target challenging cutting applications.

Produced from sub-micro grain carbide, End Mills include Hard Cut, which can handle material ranging from construction steels and tool steels to cast iron; S-Hard-Cut for milling hardened steels and cast irons; and N-Cut, which cuts everything from construction, alloyed, tool, and hardened steels to aluminum, alloys, and synthetics. Tools offer cutting diameters from 3/32 to 1 in. and also come...

Read More »
End Mills

Inserts are suited for high-speed aluminum machining.

Offered with corner radius choices from 0.8-6.4 mm, Mill1 Max tooling includes end mills, shell mills, and integral shank (monoblock) toolholders. All monoblocks come balanced to specification of G2.5 at 10,000 rpm, and face topography delivers chip control at reduced cutting forces. Products produce true 90° walls at 25 mm axial depth of cut and are suited for high-speed cutting (25,000...

Read More »
Drill Point End Mills are manufactured from carbide.
End Mills

Drill Point End Mills are manufactured from carbide.

Solid carbide Drill-Mills, offered in 2- and 4-flute configurations, are designed with 90° included point angle. Available with or without AlTiN coating, products are precision ground and made with proprietary Micro 100 SUPER CARBIDE process. Multipurpose tools for drilling, milling, spotting, chamfering, and countersinking are offered with cutter and shank diameters from 1/8-Â-¾ in....

Read More »
Inserts machine gummy, non-ferrous, and steel materials.
End Mills

Inserts machine gummy, non-ferrous, and steel materials.

ValTURN(TM) Turning System tools include 3 top form geometries: M8, R4, and C2. Double-sided inserts of ANSI Negative type geometry come in various shapes and thickness, offering 98 specific performance options. Used in continuous and interrupted cuts, M8 suits medium machining applications. Heavy-duty R4 is designed for roughing of steels and cast irons, while positive cutting land on C2 ensures...

Read More »
Utility Cutters utilize square shoulder insert edges.
End Mills

Utility Cutters utilize square shoulder insert edges.

Utility Cutters maximize effects of APET and XPET Inserts by utilizing areas not typically used in 90° square shoulder milling. BCSM Back-Corner Shell Mill allows unused corner to be used for general 15° face milling, providing 4 usable edges per insert. CMEM Chamfering End Mill delivers free-cutting, positive geometry for 30° and 45° chamfer milling.

Read More »
Milling Cutters machine high-temperature alloys.
End Mills

Milling Cutters machine high-temperature alloys.

Available in face and end-mill configurations, ValMILL(TM) V590 provides square, 90° shoulder milling that eliminates need for many secondary operations. ValMILL(TM) V595 offers flute options and multiple inserts to facilitate deep cuts of grooves, slots, cavities, and slab milling. Face Milling ValMILL(TM) V555 incorporates inserts with 5 cutting edges.

Read More »
Solid Carbide End Mills feature TiAlN coating.
End Mills

Solid Carbide End Mills feature TiAlN coating.

Maestro(TM) Metal Removal brand end mills utilize flute design that provides chatter-free milling in ferrous workpiece applications. Able to work with steels, stainless steels, cast iron, and high-temperature alloys, product has TiAlN coating that protects tool surface, even after 2,000 in. milled. End mills, available in inch and metric sizes, are offered in regular lengths or long shank style....

Read More »
Metric End Mills cut medium and hard materials.
End Mills

Metric End Mills cut medium and hard materials.

Available in 2, 3, and 4-flute designs, solid-carbide AECM Series features AlTiN coating and is engineered with corner radii ranging from 0.1-1.5 mm as sizes increase. Cutter diameters range from 1-12.0 mm with tolerance of +0.000/-0.014 mm up to +0.000/-0.043 mm, depending on size. Shank diameters range from 4-12 mm and are held within -0.0025 to -0.008 mm. TIR maximum is 0.012 mm.

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics