End Mills

End Mills

End Mills offer 3 stages of chatter suppression.

Incorporating Variable Rake Geometry, AlTiN-coated Z-Carb-AP End Mills can alter and control cutting dynamic. In Stage One, unequal flute spacing helps to disrupt rhythmic pattern created by cutting edge, which helps to suppress development of damaging harmonics. In Stage Two, unequal helix design aids in eliminating damaging harmonics that occur during typical machining, and in Stage Three, rake...

Read More »
End Mills

End Mills feature variable pitch fluting geometry.

Manufactured with rigid construction using micro-grain carbide, Series 7 High Performance End Mills deliver precision performance and minimal-chatter during use. Variable pitch fluting geometry promotes chatter suppression and tool life as well as surface finish quality and productivity rates. Suited for use in materials up to 45 Rc, end mills are available in ball and square end sizes, both with...

Read More »
Carbide End Mill is for aluminum applications.
End Mills

Carbide End Mill is for aluminum applications.

With tool geometry specially designed for aluminum applications, SUPERMILL carbide end mill features sharp corner, full eccentric relief, and diamond like carbon coating for fast stock removal and long tool life. Available in 3 flute, variable pitch and with 45° helix angle, it is offered in 3/16 to 1 in. sizes, and Long and Extra Long in Â-¼ to 1 in., and is designed to meet demanding...

Read More »
End Mills

Valenite Unveils Multiple Technologies at IMTS 2008

New products and services can help increase productivity by 20 percent or more MADISON HEIGHTS, Mich., July 16, 2008 - Valenite LLC, a global manufacturer of cutting tools and tooling systems for the metalworking industry, will introduce several first-to-market innovations at its IMTS 2008 exhibit (booth # F2979) on September 8 - 13, 2008. This launch will specifically highlight exclusive carbide...

Read More »
Solid Carbide End Mills suit machining of aluminum.
End Mills

Solid Carbide End Mills suit machining of aluminum.

Intended for high-volume machining, Alu-Jet-Cut End Mills are capable of cutting speeds in excess of 3,000 sfpm. Wear-resistant carbide substrate helps resist vibrations that could otherwise lead to premature chipping of cutting edges. Chip conveyor provides control over chip shape and directional flow to maximize chip evacuation capacity. Made with through-coolant capability, roughing cutters...

Read More »
End Mills are suited for aluminum materials.
End Mills

End Mills are suited for aluminum materials.

Allowing chatter free machining at high RPM and on heavy cuts, End Mills consist of 2 and 3 flute tools for roughing and finishing applications with large selection of corner radii and neck and flute lengths. For machining centers with coolant through spindle capabilities, flute tools with coolant through design directs coolant at cutting edge. Coolant provides lubricant, dissipates heat, and...

Read More »
End Mills

M.A. Ford® IMTS Preview TuffCut® XR7

June 17, 2008 M.A. Ford (Davenport, Iowa) is pleased to introduce an exciting new product at IMTS08. The TuffCut® XR7 is a 7-flute version of the popular XR high performance end mill. This end mill was developed with special fluting features to meet the increasing demand to machine aerospace materials such as Titanium. The tool is capable of providing 40% more metal removal per inch than a...

Read More »
End Mills

Carbide End Mills have corner radius.

Designed for full range of materials, including titanium and Inconel, SUPERMILL All Purpose carbide end mills are available from 1/8 to 1 in. and radius sizes from .010 to .125 in. End mills are furnished in long and extra long sizes from 3/16 to 1 in., and can also be furnished with Alcrona or Xceed coating. All purpose tool geometry features full eccentric relief and variable pitch with...

Read More »
Fullcut Endmill minimizes cutting resistance.
End Mills

Fullcut Endmill minimizes cutting resistance.

Expanding capabilities in multi-functional milling, Straight Shank FCR optimizes ramping as well as helical-, shoulder-, and plunge-milling operations. Sharp cutting edges of indexable insert retain strength due to eccentric relief angle for each cutter diameter. Straight Shank FCR is available in Â-¾, 1, and 1¼ in. shank diameters.

Read More »
End Mills meet micro machining application requirements.
End Mills

End Mills meet micro machining application requirements.

Solid Carbide Micro End Mills combine geometrically optimized cutting edge and slim, concave, tapered neck to offer flexible capabilities in various materials from 66 Rc hardened steel to graphite. Available in 24 designs, these ball nose, torus, and flat end style end mills can be uncoated or have TiAlN coating. Cutting diameters range from .008-.080 in., with effective cutting...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics