Encoders

Single-Turn Absolute Encoders survive harsh environments.

Supplied in die-cast housings with 12-bit analog and 14-bit CANopen outputs, Sendix® magnetic encoders feature IP 69k protection rating, are resistant to humidity and condensation, and are suitable for outdoor use. Non-contact devices have 36 mm dia and use Sensor-Protect(TM) technology, where electronics are fully encapsulated and mechanical assembly is separated for shock resistance in...

Read More »
austriamicrosystems Supplies AS5243, the Redundant 10-Bit Magnetic Angular Position IC, to MEGA-Line RACING ELECTRONICS and Audi R10 for the Le Mans 24 Hours 2008
Linear Encoders

austriamicrosystems Supplies AS5243, the Redundant 10-Bit Magnetic Angular Position IC, to MEGA-Line RACING ELECTRONICS and Audi R10 for the Le Mans 24 Hours 2008

AS5243 is a system-on-chip combining integrated Hall elements, analog front end and digital signal processing in a single device Unterpremstaetten, Austria (May 19, 2008) - austriamicrosystems, a leading global designer and manufacturer of high performance analog ICs for automotive, communication, industry and medical applications, supplies AS5243, a redundant 10-bit magnetic rotary encoder IC,...

Read More »
Angle Position Sensor targets automotive applications.
Rotary Encoders

Angle Position Sensor targets automotive applications.

Qualified to AEC-Q100, AS5134 Rotary Encoder IC supports commutation of brushless DC motors in ambient temperatures up to 150°C. With 8.5-bit resolution, unit can recognize 360 positions within one 360° turn and is accessible with serial or PWM interface. Device features 3 programmable incremental outputs and 1-6 pole pairs. Housed in SSOP-20 package, IC offers power saving mode with...

Read More »
Commutation Encoder is designed for brushless motors.
Rotary Encoders

Commutation Encoder is designed for brushless motors.

Suited for use on NEMA 23 and 34 brushless servo and step motors, HC20 features direct-read non-interpolated technology that stems from custom-phased array ASIC, and is available with 5-26 Vdc operating range. Temperature rating of 120°C will not limit motor performance, allowing manufacturers to keep from de-rating torque specs. Capable of up to 2,500 ppr, encoder is available with...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Magnetic Encoder measures rotational speed and angles.
Encoders

Magnetic Encoder measures rotational speed and angles.

EcoSpin Magnetic Encoder is modular, non-contact sensor system that delivers reliable performance in dirty, contaminated, and high vibration operating environments. With depth of 10 mm, IP67-rated encoder contains no moving parts and includes spacer strip mounted between magnetic ring and sensor, simplifying installation and adjustment. Device can measure rotational speed of spindles, shafts,...

Read More »
Quadrature Encoder and Counter Module operate at high speed.
Rotary Encoders

Quadrature Encoder and Counter Module operate at high speed.

Designed for use with ADAM-5550 series PACs, ADAM-5081 features 2,500 Vdc isolation, high-speed frequency mode (5 Hz to 1 MHz), and counter code at 1 MHz. Digital filter eliminates noise and interference (1-65,000 Â-µsec), ensuring accurate data collection and transmission, and 4 counter modes are available. Along with 4 digital output channels, solution offers frequency mode that supports...

Read More »
Rotary Encoders

Rotary Magnetic Encoder withstands harsh environments.

With -40 to +125°C operating temperature range, EMS22 non-contacting rotary magnetic encoders can operate with either +5.0 or +3.3 Vdc supply voltage, with capability of rotating up to 10,000 rpm while maintaining code accuracy. They feature austriamicrosystems® Hall Effect ASSP to produce 4 distinct waveforms including quadrature, direction/step, absolute, and pulse-width modulation....

Read More »
Video Encoder is suited for network management.
Video Encoders

Video Encoder is suited for network management.

Designed to work alongside GeViScope or reporter CCTV platforms, Model CAM2IP integrates analog cameras into networks and puts intelligent video management next to camera. DSP-based video encoder offers event-controlled encoding, demand-controlled picture formatting, intelligent compression, dual channel streaming, and remote picture viewing at up to 25 fps. Unit can be used with high speed domes...

Read More »
Switch combines 2 encoders in one unit.
Rotary Encoders

Switch combines 2 encoders in one unit.

With dual concentric inner shaft and outer pole, Type E37 acts as 2 encoders. Unit comes with or without integrated push button and has metal housing and shaft. It features optional IP68 front panel sealing and operating range of -40 to +85°C. Available with 16 or 32 detents in standard resolution, encoder offers tactile feedback so user can change channels or frequencies in precise...

Read More »
Video Encoders

Video Encoder and Software promote intelligent security.

Through constant screening and filtering of video, Endura Intelligent Video and Analytics solution can use pre-defined rules to identify specific conditions and notify operators via alarm. System is comprised of Endura Intelligent Video Encoder (hardware) and Video Analytics Behaviors (software), which enable operators to make informed decisions. With ability to manage situation by exception,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers