Linear Encoder is accurate over 100 mm stroke.

Linear Encoder is accurate over 100 mm stroke.

Long Stroke encoder has accuracy better than 1 micron with resolution of 0.05 micron. Signals from probe interface electronics are digital and easy to interface with PC/PLC or digital readouts. Unit is CE marked comes with calibration certificate in mm or inches. Applications include industrial and scientific tasks.

Read More »
Encoder/Resolvers provide range of output types.

Encoder/Resolvers provide range of output types.

Snaptrak Series absolute encoder/resolvers are shaft angle position sensors that provide BCD, Binary, Greycode, Incremental, +5V TTL or 24 Volt Logic type outputs. DC Snaptrak Series provides +/-10 Vdc, 0-10 and 4-20 mA current loop outputs proportionate to absolute shaft angle. Encoder/resolvers are available in heavy duty NEMA 12 and flange mounted versions. Six wire cable is over 1000 ft long...

Read More »
Modular Encoder requires no calibration.

Modular Encoder requires no calibration.

Accu-Coder(TM) Model 121 Self-Centering Modular Encoder has all-metal construction that will not warp or deflect. It requires no gapping or special tools to install. User simply tightens shaft clamp and installs mounting screws. Model 121 is available with up to 12-pole commutation, or with extended temperature range up to 100 deg C.

Read More »
Incremental Encoder handles high shaft loads.

Incremental Encoder handles high shaft loads.

HD20-S31 has 3 bearings that enable high axial and radial shaft loading, while sustaining speeds of 5000 rpm. Maximum radial shaft loading is 70 lb and maximum axial shaft loading is 80 lb. Encoder is suitable for applications where belt pulleys or other load-producing hardware are attached directly to encoder shaft. Encoder provides 10 to 2500 pulses per revolution with line driver or open...

Read More »
Rotary Encoders are rated for temperatures to 239 deg F.

Rotary Encoders are rated for temperatures to 239 deg F.

Compact absolute singleturn and multiturn rotary encoders may be paired with servomotors with axis heights as small as 0.79 in. Absolute rotary encoders provide absolute position value immediately upon switch-on or after power interruption. EQN 1125 multiturn rotary encoders use gear transmission to distinguish between revolutions. Free of maintenance, they transmit absolute position information...

Read More »
Encoders are available with connectors.

Encoders are available with connectors.

Accu-Coder(TM) Cube Series and model 702, 725, 758, and 225 encoders are available with Eurofast connector. Connector allows user to reduce stocking requirements for cord sets and similar components since cords can be used for encoder connections and other components of motion control systems (such as proximity sensors and photoelectric switches).

Read More »
Hollow Shaft Encoder has installed length of 2 in.

Hollow Shaft Encoder has installed length of 2 in.

Built around HS35 incremental design, HS35 12-bit absolute hollow shaft encoder is available in through and blind-shaft versions, variety of shaft bores up to 1 in. dia, and with 2 tether options. It carries IP65 environmental rating and operates from 0 to 70Â-

Read More »
Incremental Encoders provide positioning accuracy.

Incremental Encoders provide positioning accuracy.

Family of incremental optical encoders range in size from 30 to 48mm dia with resolutions up to 6000 lines per revolution. They have 2-channel quadrature output plus index, allowing count resolution to increase to 24,000 counts per revolution, and minimizing homing sequence. All have TTL compatible line driver output to boost signal strength and increase immunity to noise over long cable lengths....

Read More »
Encoders offer hollow hub for ease of installation.

Encoders offer hollow hub for ease of installation.

Two models of incremental encoders with commutating abilities feature resolutions of 6000 lines/revolution, satisfying moderate to high-end accuracy requirements. They are available in 35 and 45 mm dia sizes, and are assembled with integral PC board. Models offer 2-channel quadrature output; index, which allows count resolution to 24,000 counts per revolution; and TTL compatible line driver...

Read More »
Absolute Encoder operates at speeds to 6,000 rpm.

Absolute Encoder operates at speeds to 6,000 rpm.

Single turn Absolute Series Accu-Coder Model 926 is available in variety of bore sizes in both blind hollow and thru-bore versions. It has thin, 1.38 in. profile, flexible mounting system, industrial grade integral bearings and digital signal that makes it suited for applications where presence of electrical noise is high.

Read More »

All Topics