Encoder mounts on machine or motor shaft.
Encoders

Encoder mounts on machine or motor shaft.

Sealed Series HS20 Dynapar Hollowshaft Encoder is available in 2 in. configuration with English and metric hub sizes ranging from 1/4 to 5/8 in. and 6 mm to 16 mm. It mounts directly to shaft using hollow, floating shaft mount and anti-rotation spring tether. Unit has precision bearings and seals at both ends of hollow shaft, LED light source, operating speeds to 100 kHz and NEMA 4/IP65 rating....

Read More »
Hollow-Shaft Encoders are intrinsically safe.
Rotary Encoders

Hollow-Shaft Encoders are intrinsically safe.

Model HS35 (3.5 in. dia) and HS25 (2.5 in. dia) are available with Class I, Division 1, Group C and D ratings when connected to appropriate electrical barriers. Both models feature RS422 compatible output. Encoders can be mounted directly to shafts with diameters ranging from 1/4 to 1 in. Intrinsic safety rating makes them suitable for use in hazardous environments such as industrial process...

Read More »
Absolute Encoder handles tough environments.
Encoders

Absolute Encoder handles tough environments.

Multiplexed Scaleable Absolute Encoder works in severe electrical and physical environments with high temperatures, vibration, and moisture. It converts up to 16 shaft inputs to BCD or binary information corresponding directly to shaft angle with accuracy of ±1 pt. in 3600. Data outputs are TTL compatible, and data transfer and data hold line are provided for interfacing to microprocessors...

Read More »
Linear Encoder has no speed/resolution tradeoff.
Linear Encoders

Linear Encoder has no speed/resolution tradeoff.

Non-contact Linear Electric Encoder provides absolute position output with resolution of 10 nm and accuracy to less than 10 Â-µm. It uses electrically excited patterned scale and read head that responds to electric field flux generated by scale regardless of speed. Encoder is suitable for automation, robotics, machine tools, automotive, office automation, and aerospace applications. Scale is...

Read More »
Encoder Products utilize laser interferometry.
Linear Encoders

Encoder Products utilize laser interferometry.

NanoGrid Model A has electronic interpolation to 0.3 Nm on ISA-bus compatible PC board with either 32-bit digital position word or optional A-quad-B format output. It delivers repeatability of better than ±5 Nm and has high speed capability of 700 Nm/sec. Model B produces selectable A-quad-B outputs to 20 Nm resolution using ASICs on small printed circuit board, with speed capability up to...

Read More »
Size 15 Encoder fits in small spaces.
Encoders

Size 15 Encoder fits in small spaces.

Model 755S Low Profile Round Series Accu-Coder(TM) has a 1.5 in. dia and is 1.2 in. long. It features rugged construction and flexible mounting system for easy installation. Encoder incorporates Encoder Product Company's sensing technology to provide accuracy and reliability.

Read More »
Angle Encoders have integral bearing and stator coupling.
Encoders

Angle Encoders have integral bearing and stator coupling.

RON/RCN angle encoders feature recognizable outlet channels on flange and rear side to ensure that fluids cannot collect on encoder or seep inside housing. Signal processing electronics provide resolution up to 134 million position values (27 bits) per revolution. Encoders feature accuracy of better than ± 5 in. and line count above 18,000. Applications include rotary tables and swivel...

Read More »
Encoder is available in thru-bore and hollow shaft.
Rotary Encoders

Encoder is available in thru-bore and hollow shaft.

Model 260 General Purpose Accu-Coder(TM) combines ASIC encoder-on-a-chip design with thru-bore encoder package. It can be specified with three 120 electrical degree phase tracks to provide 4, 6 or 8-pole commutation feedback for brushless servo motor applications. Extended temperature ranges to 120° C allow servo motors to operate at higher power outputs and duty cycles, limiting concern...

Read More »
Encoders feature digital ASIC technology.
Rotary Encoders

Encoders feature digital ASIC technology.

Model 771 and 776 Thru-Bore Series Accu-Coders(TM) have bore sizes to 1.875 in. and are suitable for motor feedback, velocity, positioning and servo control applications. Model 771 mounts directly on NEMA C-Face motors and features C-Face mount on both sides. Model 776 is 1.36 in. deep and ideal for space restrictive applications. Encoder-on-a-chip design provides noise immunity necessary for...

Read More »
Rotary Encoder is designed for large shafts.
Rotary Encoders

Rotary Encoder is designed for large shafts.

Designed for shafts with axes requiring accuracies to approximately 10 angular seconds, ERM 280 modular rotary encoder with magnetic scanning, features 20mm high scanning head. Magneto-resistive scanning permits shaft speeds up to 24,000 rpm, and is available for shaft diameters up to 295 mm (11.6 in.). Encoder features protection class IP 66. ERM 280 is mainly used on C axis of lathes, quill...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers