New Enclosures Products

ATR Format Enclosures have conduction-cooled design.

Available for both OpenVPX and MicroTCA architectures, conduction-cooledÃ- ATR format chassis comes in Ã-½ andÃ- Ã-¾ sizes for 3U or 6U boards. Options are also available for MicroTCA.3 Hardened form factor as well as heat exchanged versions. Designed to meet MIL-STD-704, MIL-STD-810G, and MIL-STD-461, products are also available with power interface boards forÃ- incorporating...

Power Distribution Boxes eliminate voltage drop in field.

Designed for field-based power supply voltages of 24 V, M12 Power Distribution Boxes, in combination with standard M12 power cables of 4x10 AWG conductors, can eliminate voltage drop that occurs across long cable runs. Distributor has four T-coded M12 receptacles with current load up to 10 A/channel. Each of 8 channels is equipped with plug-in fuse, and LEDs indicate status of input and output...

Enclosure Kits allow flexible transmitter mounting.

Offered in kits with hinged or flat cover, Signet 9900 Transmitter Rear Enclosures enable flexible mounting of Signet 9900-1P Transmitter onto pipes, walls, tanks, struts, at angles, or inside panels. Holes for wiring in any orientationÃ- can be drilled on any enclosure side for further flexibility, and room is provided to accommodate all accessory modules: 4–20 mA output, batch, relay,...

Slim, Lockable Shelter protects bikes from weather, theft.

Tailored to situational requirements, fully enclosed and locking Bike Garage™ stores up to 9 bikes by staggering them vertically on MaxRack hangers. Structure is anodized aluminum with translucent polycarbonate panels on 3 sides, steel garage door rolls up and down and tucks under roof, and steel hasp riveted to door accepts padlocks. At 4 ft 8 in.Ã- deep and 13 ft 1 in.Ã- wide,...

6 Engineering & High-Performance Plastics Used for Machined Components

This resource breaks down six of the most commonly used high-performance plastics, properties and common applications, and questions to ask during material selection.

Stahlin J, CF, and F Series Non-Metallic Enclosures Pass UL 2043 Fire Test for Air Handling Spaces

On March 17, 2016, Stahlin Non-Metallic Enclosures provided the UL lab at the Northbrook testing facility with samples of the J, CF, and F Series. All three series were subjected to the same flame test described in UL Standard 2043, Fourth Edition. Each of the Stahlin Non-Metallic enclosures product specimens tested MET all three requirements, which are: a)Ã- Ã- The peak rate of heat...

Die-Cast Aluminum Boxes feature IP68 rating.

Combining corrosion-resistant die-cast aluminum construction with continuous silicon gasket, AN-A Series can house sensitive equipment in hazardous, dusty, and washdown factory environments, as well as in wet outdoor locations. Enclosures are available in 24 sizes ranging from 3.54 x 1.42 x 1.18 in. to 10.24 x 6.30 x 3.56 in., suited for machine controls, security, lighting, instrument cases,...

Canvas Experts Wins MFA Award of Excellence

Canvas Experts, of Ocean City, Maryland, was honored by the Marine Fabricators Association (MFA) with an Award of Excellence for Rigid Enclosures. Designer Michael Varga and fabricator Victor Albino used Safety Components' innovative BreakWater X™ in their winning installation. When Varga and Albino came upon Brenda Lou, an Albemarle 330 Express, they found the original enclosure was leaking....

Tough Type 1 Metal Cabinets

STI’s Metal Protective Cabinets protect equipment from hazardous parts and provide a degree of protection to enclosed equipment against ingress of falling dirt. Ideal for junction and power supply boxes, the heavy-duty cans are constructed with a powder coated metal to help protect against corrosion. They have a continuous piano type hinge and seven Ã-½, Ã-¾ inch conduit knockouts....

Electronics Enclosures support wall mounting with adapter.

Designed for portable instrumentation applications, CARRYTEC large and handheld instrument enclosures support wall mounting, for charging and data transfer, via available adapter. This option adds to existing mounting methods (desktop, tripod, rail, suspension arm) and is molded in off white (RAL 9002) ABS (UL 94 HB) for indoor applications or UV-stable lava ASA+PC-FR (UL 94 V-0) for outdoor use....

Cabinet System protects equipment during severe earthquakes.

Engineered to protect and store network equipment in seismically active areas, Z4-Series SeismicFrameÃ-® Cabinet SystemÃ- features 1,500 lb seismic equipment load with additional 100 lb top load for cabling per GR-63-CORE testing. Unit comes in multiple size options, including 600 and 800 mm, as well asÃ- 1,200 mm deep model with narrow width. Features include factory-installed...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.