Encapsulants

Encapsulant Materials protect thin film solar modules.
Miscellaneous Film

Encapsulant Materials protect thin film solar modules.

Because ionomer-based DuPont(TM) PV5400 Series is fundamentally resistant to moisture intrusion, it is possible to achieve lasting edge integrity without caulking or additional edge sealing. Compared with traditional EVA and PVB encapsulants, PV5400 Series has up to 100 times more electrical resistivity, offering modules optimized electrical insulation, which minimizes current leakage. Products...

Read More »
Encapsulation Equipment

ALH SYSTEMS Obtains Ul94 V-0 Approval for Epoxy Resin System

Epoxy resin specialist ALH SYSTEMS LIMITED has received Approval to UL94 V-0 for its NP1003 encapsulation and potting resin. The low viscosity NP1003 resin system can be mixed and cured at ambient or elevated temperatures. The outstanding features of the NP1003 system are : o High gloss finish and excellent adhesion o Very good electrical strength o High thermal conductivity (0.9 W/m/°K) o...

Read More »
Miscellaneous Compounds

Comprehensive Line of Henkel Products Support Solar Cell and Module Assembly and Installation

Adhesives, Sealants and Cleaners Help Harness the Power of the Sun... Rocky Hill, Conn. - To reduce costs and improve the reliability of sensitive photovoltaic devices, Henkel Corporation offers a comprehensive line of adhesives, sealants and cleaners for PV manufacturing and installation. These high tech products comply with relevant standards of the photovoltaic industry and are widely used in...

Read More »
Polyurethane Potting Compound allows user to adjust hardness.
Miscellaneous Compounds

Polyurethane Potting Compound allows user to adjust hardness.

Designed to cure at room temperature, 2-component 20-2125 Potting, Encapsulating, and Casting Resin cushions and protects sensitive electronic components while imparting very little stress on components during cure or thermal cycling. Hardness can be modified by changing mix ratio of Polyol and Isocyanate. Moisture-resistant with low toxicity, product can be used in wet environments and minimizes...

Read More »
Encapsulants

Potting and Encapsulating Compound is FDA compliant.

Formulated to cushion and protect sensitive electronic circuits, components, and devices, Green Potting and Encapsulating Compound is moisture-resistant and imparts very little stress on components during cure or thermal cycling. Raw materials are listed under different FDA CFR 21 Sections, allowing use in applications where there is direct food contact. Base Natural Oil Polyol is obtained...

Read More »
Epoxy Potting Compound withstands exposure to harsh chemicals.
Encapsulation Equipment

Epoxy Potting Compound withstands exposure to harsh chemicals.

Designed to meet UL-674 requirements for explosion-proof motors, Loctite® E-40EXP(TM) maintains more than 85% of its compression strength following exposure to 13 harsh chemicals. Two-component compound is used to pot and seal wire conduits, isolating electric motor from hazardous vapors and chemicals that could cause explosion. Curing in approximately 2 hours at room temperature, material...

Read More »
Miscellaneous Compounds

Polyurethane Potting Compound protects electronic components.

Potting, encapsulating, and casting resin 20-2121 consists of 2-component, room temperature curing system that will cushion sensitive electronic components. With toxicity level that reduces employee exposure to dangerous chemicals, moisture-resistant compound imparts minimal stress on components during cure or thermal cycling. Characteristics include 2,000 psi tensile strength, 80 Shore A...

Read More »
Room Temperature Curing Flexibilized Epoxy Combines High Strength and Toughness with Chemical and Abrasion Resistance
Encapsulation Equipment

Room Temperature Curing Flexibilized Epoxy Combines High Strength and Toughness with Chemical and Abrasion Resistance

HACKENSACK, NJ - Combining the benefits of epoxy resins and polyurethanes, Master Bond Polymer System EP30D-7 offers superior strength, flexibility, abrasion resistance and toughness. This two component epoxy is ideal for high performance bonding, sealing, coating, and encapsulating applications in the electronic, electrical, computer, metalworking, optical, electro-optical and oil/chemical...

Read More »
Thermally Conductive, Low Viscosity Epoxy Features Cryogenic Serviceability
Resins

Thermally Conductive, Low Viscosity Epoxy Features Cryogenic Serviceability

HACKENSACK, NJ - Master Bond EP30FLAO is a two component epoxy resin system for high performance potting, bonding, sealing and coating. It is extremely versatile and can be used in a wide variety of cryogenic applications. This low viscosity epoxy with excellent flow characteristics makes it ideal as a thermally conductive potting compound. It is widely used in the electronic, electrical,...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics