Vishay Intertechnology's High Speed IR Emitters Named as 2019 Elektra Awards Finalists
VSMY5850X01, VSMY5890X01, and VSMY5940X01 Shortlisted in "Semiconductor Product of the Year — Analog" Category MALVERN, Pa. — Nov. 26, 2019 — Vishay Intertechnology, Inc. (NYSE: VSH) today announced that its Vishay Semiconductors VSMY5850X01, VSMY5890X01, and VSMY5940X01 high speed infrared (IR) emitters have been selected as finalists for the 2019 Elektra Awards in the category of...
Read More »
New High Speed IR Emitters Offer Floor Life of 168 Hours and Feature Moisture Sensitivity Level of 3
VSMY5850X01, VSMY5890X01 and VSMY5940X01 emits their light and power out of the top of the chip. Deliver 30% high radiant intensity than previous-generation devices over a wide temperature range from -40°C to +110°C. Achieve high intensity to 13 mW/sr for proximity sensors, optical switches and miniature light barriers.
Read More »
Marktech Optoelectronics Announces Multi-Wavelength Emitters, Detectors and LEDs for Wearables
December 3, 2018 – Latham, NY, USA – Marktech Optoelectronics, Inc. (www.marktechopto.com)(Marktech), a privately-held and veteran-owned leading designer and manufacturer of standard and custom optoelectronics components and assemblies, including UV, visible, near-infrared (NIR), and short wavelength infrared (SWIR) emitters, detectors, InP epiwafers and other materials, today announced...
Read More »
Latest OP207CL Infrared LED Emitter from TT Electronics Comes with Integrated Collimating Lens
The OP207CL Infrared LED Emitter is offered with integral mounted lens that are mounted on 9.9 mm x 9.9 mm PCB substrate. The unit delivers feature up to 10 mW total radiated power at maximum drive current of 100 mA and an angle of half intensity 2.25°. It can be operated in -40°C to 105°C temperature range and is suitable for applications such as industrial automation, safety systems,...
Read More »
Corrosive/Ultrapure Fluid Heat Exchanger Coils - Choosing the Right Strategy
Check out this white paper to learn which heat exchanger types are the best for high temperature performance in chemically aggressive applications.
Read More »
LED Infrared Light Emitter offers average life of 50,000 hrs.
LED10W-4R-VIR-2P LED Infrared Light Emitter is available in beam configurations such as spot, flood and a combination of both. Unit produces 1600 lumens of visible light and 750nm, 850nm or 940nm infrared light. Product is designed from die cast aluminum, stainless steel and unbreakable polycarbonate and is resistant to accumulation of dust, dirt and humidity. LED10W-4R-VIR-2P LED can be trunnion...
Read More »
High Efficiency IR Components
The Micro-Hybrid thermopile detectors with a detectivity of up to 7.2 * 108 and the Micro-Hybrid radiation-intensive IR emitter with a membrane temperature of up to 850°C creates the high sensitivity performance. These components are hermetically sealed using Micro-Hybrid's specially developed sealing technology so they not only are very sensitive, but can withstand harsh environments up to...
Read More »
Avo Photonics Develops SLED-Based Broadband Near-Infrared Source for Luxmux
HORSHAM, Pa. - Avo Photonics, a leader in optoelectronic product design, development, and manufacturing, was commissioned by Luxmux Technology Corporation, to develop and manufacture a solid-state, broadband, continuous emitter for use with their line of miniature integrated spectrometers. The emitter combines the outputs of multiple super-luminescent LEDs (SLEDs) into a polarization-maintaining...
Read More »Jenoptik Shows New Laser and Optic Products at Photonics West 2016
Jenoptik presents product highlights of its Optical Systems and Healthcare Industry divisions at SPIE Photonics West from February 16th to 18th in San Francisco, South hall of Moscone Center, booth 1823. In the year that marks its 25th anniversary, Jenoptik will exhibit various products and solutions for semiconductor, life science and industrial applications at SPIE Photonics West 2016 in San...
Read More »
Infrared Emitter operates over ranges from -65 to +150°C.
Designed for military and industrial markets, OD-850WHT gallium aluminum arsenide (GaAlAs) IR light emitting diode has peak emission of 850 nm, optical half intensity beam angle of 80°, and typical optical power output from 24–28 mW. Device can operate without heat sinking and without derating to 80°C without any internal coatings. Available in hermetically-sealed, standard 2-lead...
Read More »GaAlAs NIR Emitters are built to serve rugged applications.
Designed for night vision and surveillance and housed in 3-lead, TO-39 hermetically sealed packages that measure 0.026 x 0.026 in., RoHS-compliant OD-110W offers uniform optical beam withÂ- 850 nm typ peak emission wavelength and 140 mW optical output. All surfaces feature gold plating, and 4 wire bonds positioned on die corners minimize potential artifacts in...
Read More »
Solve Any Large-scale Water Control Problem with the Aqua Dam Flood Barrier
Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.
Read More »
