EMI / RFI Filters

Sine Wave Filters meet IEEE-519 requirements.
EMI / RFI Filters

Sine Wave Filters meet IEEE-519 requirements.

Series A provides sine-wave output voltage when driven from PWM inverters with switching frequencies from 2-8 kHz. For drive applications, filters eliminate motor insulation failures and reduce EMI in applications where distance between motor and inverter is up to 15,000 ft. Available as panel-mount or in NEMA 1, 2, and 3R enclosures, units offer continuous current rating of 100% RMS. They range...

Read More »
EMI Filter protects LCD driver lines from interference.
EMI / RFI Filters

EMI Filter protects LCD driver lines from interference.

Offering protection against ESD damage up to 15 kV, EMIF10-LCD01F1 is 10-line filter that rejects rerouted and retransmitted radiation frequencies on lines between graphics controller and LCD. Based on low-pass RC Pi filter, product offers 30 dB of attenuation at GSM and Bluetooth frequencies and functions across 900 MHz to 3 GHz frequency range. It is designed with line capacitances that support...

Read More »
EMI Filter includes ESD protection diodes.
EMI / RFI Filters

EMI Filter includes ESD protection diodes.

Measuring 1.6 x 1.6 mm with 0.7 mm profile, 2-channel Model GTF701-HS3-GS08 features insertion loss of -4 dB over 1-10 MHz, max reverse stand-off voltage of 5 V, and max clamping voltage of 15 V. Unit provides transient protection for 2 data lines, meeting Level 4 IEC 61000-4-2 specifications, as well as IEC 61000-4-5 specification of 5 A. Built on thin-film-on-silicon technology in LLP75-6A...

Read More »
Active EMI Filter targets 48 V dc-dc converter applications.
EMI / RFI Filters

Active EMI Filter targets 48 V dc-dc converter applications.

Providing attenuation from 150 kHz to 30 MHz, Model QPI-4 delivers over 40 dB common-mode and more than 70 dB differential-mode noise attenuation at 500 kHz. It meets specifications for international 36-76 Vdc telecom bus, including 100 V, 100 ms surge requirement. Rated at 7 A, unit supports single or multiple dc-dc converters requiring up to 336 W of input power at 48 V input. Surface mount LGA...

Read More »
Filter Protectors cover frequency range of 100-700 MHz.
EMI / RFI Filters

Filter Protectors cover frequency range of 100-700 MHz.

Series HF protects multiple or high-power single RF transmitter applications where dc voltage is not required. Capable of handing up to 750 W, dc blocked filter features multi-strike capability and fully weatherized housing. Insertion loss is 0.1 dB or less. Suited for operating temperatures between -50 and +85°C, filter protectors are available with standard N and 7/16 DIN connectors.

Read More »
EMI Filters suit industrial and military applications.
EMI / RFI Filters

EMI Filters suit industrial and military applications.

Single- and 3-phase EMI/EMC filters are epoxy filled and suitable for military COTS applications for shock and vibration environments. Rated from 1-400 A for use in standard and stringent EMI commercial, industrial, and military applications, 3-phase filters are offered in delta and wye configurations and can be customized for compliance with CE102 limits of MIL-STD-461. Products are available in...

Read More »
Power-Line Filter is rated up to 300 A.
EMI / RFI Filters

Power-Line Filter is rated up to 300 A.

EMC Series RP400 eliminates equipment and mains-borne electromagnetic interferences. It features universal input up to 480 Vac and Y configuration, which incorporates filters on all 3 phases plus neutral. Series includes 11 models ranging from 15-300 A/phase. Each is CSA/UL and EN approved for input voltages up to 480 Vac, meeting most ac input line requirements. Applications include industrial...

Read More »
Display Filters can incorporate EMI/RFI shielding.
EMI / RFI Filters

Display Filters can incorporate EMI/RFI shielding.

DURALAN II(TM) filters use fine wire meshes and transparent conductive materials for EMI/RFI shielding or ESD applications. Anti-reflective coatings are also available, improving light transmission and contrast to allow sunlight readability in flat panel displays. Chemical resistant filters offer capability to embed graphics inside laminate for printing that is protected from surface wear....

Read More »
Powerline Filter provides protection from 100-300 A.
EMI / RFI Filters

Powerline Filter provides protection from 100-300 A.

FL Series EMI filter provides protection from conducted electronic noise in 3-phase applications. Suited for inverter, variable speed motor drive, RF generator, and uninterruptible power supply requirements, product incorporates integral coil design with characteristics that make it suitable for use in existing products as well as in new designs.

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics