EMI / RFI Filters

EMI / RFI Filters

EMI filter is designed for wireless handsets.

Available in 0.40 mm pitch chip scale package, Praetorian(TM) CM1452 EMI filter is offered in 4, 6, and 8 channel versions. Each channel consists of 3 pole L-C filter with min inductor value of 17 nH and nominal capacitor values of 15 pF. Device offers ESD protection up to ±15 kV contact discharge per IEC61000-4-2 Level 4 specification and ± 30 kV using Human Body Model. Typical...

Read More »
Filter Arrays feature integrated ESD protection diodes.
EMI / RFI Filters

Filter Arrays feature integrated ESD protection diodes.

VEMI filter arrays provide EMI filtering and ESD protection for data lines in space-critical mobile applications. Units are available in LLP75-6A, LLP75-7A, LLP70-9A, and FlipChip (BGA) packages and in 2-, 3-, 4-, and 6-channel configurations, respectively. Devices combine -30 dB filter attenuation from 900 MHz to 2.3 GHz and 30 kV ESD protection. Arrays provide I/O protection in mobile and smart...

Read More »
EMI Filters are offered with optional surge suppression.
EMI / RFI Filters

EMI Filters are offered with optional surge suppression.

Available for 100-120 or 200-240 line voltages, RoHS-compliant EMI Filters feature fully encapsulated construction that complies with EN 133200 and UL 1283 as well as UL94 VO plastic enclosure that protects against electrical shock. Products can be mounted with Â-¼ in. quick connect terminals, allowing use wherever EMI control is needed, including multiple locations within one piece of...

Read More »
EMI / RFI Filters

EMI Filter targets wireless handsets.

Housed in TDFN package with 4, 6, or 8 channels, single-chip Praetorian(TM) CM1460 provides EMI filtering and ESD protection for interfaces connecting host processor to camera and display modules in wireless handsets. Each channel consists of 3 pole L-C filter with minimal inductor value of 17 nH and nominal capacitor value of 15 pF. Chip provides ESD protection up to ±15 kV contact...

Read More »
EMI / RFI Filters

EMI Filters target wireless handsets.

Praetorian(TM) ASIP(TM) EMI Filter, Model CM1419 integrates spiral inductors with capacitors, diodes, and resistors on single chip, resulting in equivalent series resistance of 0.28 Ohms with minimal insertion loss in 5-bump CSP format. ESD diodes connected to filter ports safely dissipate ESD strikes of ±30 kV. Attenuation levels are greater than -40 dB in 800 MHz to 2.1 GHz frequency...

Read More »
Tubular EMI Filter mitigates electrical noise.
EMI / RFI Filters

Tubular EMI Filter mitigates electrical noise.

Available in 6 standard filter versions, CORCOM WG series offers method of providing industry compliance for conducted EMI/RFI emissions. RoHS-compliant products are packaged in tubular design and have full agency approval from UL, CSA, and VDE. Rated for up to 16 A @ 250 Vac 50/60 Hz, series is equipped with five 0.250 FASTON quick connect terminals and one M8 x 1.25 in. mounting stud. Leakage...

Read More »
EMI Filters are suited for high speed data lines.
EMI / RFI Filters

EMI Filters are suited for high speed data lines.

Featuring ESD protection, CM1470 inductor based filter arrays are available in 4-, 6-, and 8-channel versions. Each channel has inductance of 18 nH and input capacitance of 2 pF. ESD diodes connected to filter port safely dissipate ESD strikes of ±2 kV per Level 1 requirement of IEC61000-4-2 international standard. Using MIL-STD-883 (Method 3015) specification for Human Body Model ESD, pins...

Read More »
EMI / RFI Filters

EMI Filters withstand high-voltage surges.

Available in 1206, 1809, and 1812 case sizes, EMI Filters are rated to 2 kV and intended for I/O ports of telecommunication and network equipment. They withstand 1,500 Vrms at 50/60 Hz for 60 sec, 2,250 Vdc for 60 sec, and 2,400 V peak voltage surge. Units accept ANSI/IEEE Std 802.3 and ANSI/IEEE Std 803af, making them Power-Over-Ethernet approved.

Read More »
EMI Filter suits portable electronics.
EMI / RFI Filters

EMI Filter suits portable electronics.

Housed in 16-pin DFN package, 8-line, low-pass filter array, Model EM8D-100L features integrated TVS diodes, and is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed data interfaces. With desired cutoff frequency of 150 MHz, unit provides EMI/RFI attenuation better than 25dB in 800 MHz to 3GHz bandwidth, blocking RF noises from GSM, DCS, or Bluetooth. In...

Read More »
EMI Filters feature UL 94 V0 plastic enclosures.
EMI / RFI Filters

EMI Filters feature UL 94 V0 plastic enclosures.

Mounted with single screw, EMI Filters can be used wherever EMI control is needed. Fully encapsulated construction complies with EN 133200 and UL 1283. By eliminating capacitor to earth ground connection, leakage current is greatly minimized. Available for 100-120 and 200-240 line voltages, filters include Â-¼ in. quick connect terminals. Standard models incorporate 5.0 mH common mode...

Read More »

All Topics