Electronic Sockets

Electronic Sockets

IC Test Adapter supports 0.8 mm pitch, 96-position BGA ICs.

Model PA-BGA96C-Z-01 probing and prototyping adapter for testing clock driver ICs includes GHz BGA socket. It features pin self-inductance of 0.11 nH and mutual inductance of 0.028 nH, while capacitance to ground is 0.028 pF and current capacity is 2 A/pin. Operating over temperature range of -35 to +100°C, unit is mounted on PCB which interfaces BGA socket to 0.100 in. center pin grid array on...

Read More »
BGA Socket addresses burn-in characterization requirements.
Electronic Sockets

BGA Socket addresses burn-in characterization requirements.

Featuring floating guide for precise ball to pin alignment, Model CBT-BGA-6011 supports 9 x 12 mm, 1 mm pitch, 48-position, 9 x 11 ball array configuration. Contactor delivers 0.93 nH self inductance, insertion loss of less than 1 dB at 23.2 GHz, and contact resistance of less than 16 mW. Current capacity for each contactor is 8 A at 80°C temperature rise. Operating from -55 to +180°C, socket...

Read More »
Electronic Sockets

Spring Pin BGA Socket tests digital camera processors.

Configured to test 13 x 13 mm, 0.65 mm pitch, 293 position, 19 x 19 ball array, CBT-BGA-7005 features contactor with stamped spring pin, 26 g actuation force per ball, and cycle life of 500,000 insertions. Self inductance of contactor is 0.88 nH, insertion loss is less than 1 dB at 15.7 GHz, and capacitance is 0.097 pF. Designed with floating guide for precise ball to pin alignment, socket...

Read More »
Spring Pin Socket helps test power management devices.
Electronic Sockets

Spring Pin Socket helps test power management devices.

Model SSK-QFN-7000 includes contactor that is spring pin with offset plunger, which allows 2 spring pins to contact one device lead or pad. Featuring current capacity of 2.8 A at 80°C temperature rise, each contactor has self inductance of 0.97 nH, insertion loss of less than 1 dB at 11.2 GHz, and capacitance 0.58 pF. Kelvin spring pins have 28 g actuation force per ball and cycle life of...

Read More »
Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components
Sponsored

Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components

For the past 60 years, the use of copper infiltration on ferrous metals in powder metallurgy has been a popular method for manufacturing high performance components. Recently, a new twist on an old idea has been developed in the form of a new wrought copper alloy wire. With excellent infiltration response as well as the ability to improve numerous physical and mechanical properties of ferrous materials, this new technology presents many advantages for PM processing and production. In this comprehensive white paper, you will explore all you need to know about this material, including an in-depth look at its chemical and physical properties. Using automotive components as examples, the white paper examines the benefits of this new form of copper infiltration compared to more traditional infiltration methods. Download now, and discover if this new technology is the solution for your high performance component application.

Read More »
Electronic Sockets

Viking Modular Solutions(TM) Uses Patent-Pending Technology to Deliver High-Density DDR3 DRAM Modules

DDR3 Stacking Technology Enables 8GB VLP DIMM and 16GB LR-DIMM for Demanding Environments SAN JOSE, Calif.- Viking Modular Solutions(TM), a division of Sanmina-SCI Corporation (Nasdaq: SANM), and leading manufacturer of innovative DRAM modules and Solid State Drive (SSD) solutions, today announced its DDR3 8GB Very Low Profile (VLP) Registered DIMM is available for immediate qualification....

Read More »
BGA Package Converter speeds system board development.
Electronic Sockets

BGA Package Converter speeds system board development.

Model PC-BGA256B/BGA256E-B-01 is designed to receive 23 x 23 mm BGA, 16 x 16 array, 1.27 mm pitch on top and converts 1:1 pin mapping to 17 x 17 mm BGA, 16 x 16 array, 1 mm pitch on bottom, allowing new development system board to be tested with previous version of BGA device. Convertor can also be reversed by removing solder balls from 1 mm pitch side and adding them on 1.27 mm pitch side, and...

Read More »
Electronic Sockets

Elastomer Socket accommodates 0.5 mm pitch, 25-pin WCSP.

Designed for 2.75 x 2.75 mm package size, Model SG-BGA-7188 verifies function of IC in development system. Unit operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss and contact resistance of 20 mW per I/O. Mounted using supplied hardware on target PCB with no soldering, socket incorporates quick insertion method using integrated compression plate. Temperature range is -35 to...

Read More »
Electronic Sockets

BGA Socket provides accessibility for thermal control.

Designed for 13.5 x 8 x 1.2 mm package, Model SG-BGA-7199 supports 0.65 mm pitch 176 ball BGA and operates at bandwidths up to 10 GHz with less than 1 dB insertion loss. Contact resistance is typically 20 mW per I/O. Socket incorporates quick insertion method and has mechanism for attaching thermal stream accessories. Operating from -35 to +100°C, device verifies function of IC in development...

Read More »
QFN Socket survives temperatures from -55 to +155
Electronic Sockets

QFN Socket survives temperatures from -55 to +155

Addressing performance requirements for 0.4 mm pitch devices, SBT-QFN-4008 is designed to JEDEC STD.MO-220 and features contact design with outside spring and flat etched plungers. Contactor is stamped spring pin with 34 g actuation force per pin and cycle life of 100,000 insertions. Self inductance of contactor is 1 nH, insertion loss is less than 1 dB at 7 GHz, and capacitance is 0.4 pF....

Read More »
Stamped Spring Pin Socket enables UART testing to 5 Mbps @ 1.8 V.
Electronic Sockets

Stamped Spring Pin Socket enables UART testing to 5 Mbps @ 1.8 V.

Designed for testing 7 x 7 mm QFN packages with 0.5 mm pitch, 48 positions, and center ground pad, CBT-QFN-7002 addresses requirements for testing UART serial to parallel data converter. Contactor consists of stamped spring pin with 26 g actuation force per ball and cycle life of 500,000 insertions; self inductance is 0.88 nH, insertion loss is less than 1 dB at 15.7 GHz, and capacitance is 0.097...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics