Electronic Racks

Server Racks have ventilated front and rear steel doors.
Electrical Equipment & Systems

Server Racks have ventilated front and rear steel doors.

Server racks promote front-to-back directional flow of equipment cooling air. Top of rack has multiple cable access ports and cable access hole in bottom. Panel mounting rails have separate provisions for vertical cable management and 4 adjustable 19 in. panel width mounting rails. Along with provision for top-mounted exhaust fan, racks accommodate mounting of 12 and 18 in. wiring ladders....

Read More »
Electronic Rack Cabinets come in 100 sizes.
Electrical Equipment & Systems

Electronic Rack Cabinets come in 100 sizes.

Industrial Electronic Racks accommodate 19, 24, and 23 in. electronic and telecommunications equipment. Using components from grid rail system, rack angles can be positioned anywhere within Mtrx modular cabinet frame. Fixed shelves, pull-out shelves, drawers, guides, and panels can be installed directly on rack angles. Rack frame can be closed for NEMA 12 applications or left open for NEMA 1...

Read More »
Electrical Equipment & Systems

Rack Cabinets conform to industry-standard EIA(TM)-310-D.

Model S2 42U 19-inch, type A rack cabinet is thermally optimized to support high heat and power loads. Rack features perforated front door, 6 side-wall compartments, cable channel with cable management rings, removable side panels, and split rear door. Model S2 42U Expansion Rack Cabinet has same features but does not include side panels. Model S2 25U Standard Rack Cabinet provides 25U of rack...

Read More »
Central Office Shelf includes multiple redundancy modes.
Electrical Equipment & Systems

Central Office Shelf includes multiple redundancy modes.

CO-Star(TM) AdvancedTCA(TM) Central Office Shelf is 19 in. 13U system that provides 14 slots that are electrically and mechanically compliant with PICMG 3.0 AdvancedTCA(TM) specification. Unit meets GR-63, GR-1089 UL/EN 60950 EN55024 for NEBS Level III and uses high flow rate and high pressure cooling. Other features include high-performance shelf management and high-performance backplane for 5...

Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
Sponsored

How to Effectively and Efficiently Clean Heat Exchangers, Part I

For refineries and petrochemical plants, cleaning heat exchangers is a dirty job but somebody has to do it. While there are many approaches on how to clean shell and tube heat exchangers, it is indisputable that the right method is absolutely critical for ensuring that equipment is fully operational. Otherwise, you could end up with a potential equipment shutdown, which will cost you time and money. In this three-part series, you will learn about the various benefits, methods, and obstacles involved in heat exchanger cleaning. Part one introduces the fundamentals of cleaning, as well as explores the pros and cons of on-site versus off-site services. Download the first of this three series to assist you in finding the best solution for your dirty job here.

Read More »
Open Frame Rack provides easy equipment access.
Electrical Equipment & Systems

Open Frame Rack provides easy equipment access.

Heavy-Duty Open Frame Rack is available in 7 or 8 ft tall models and can be grouped together with 2- and 4-post racks, allowing for expansion. Holes are predrilled in base to ensure secure fastening to floor. Vertical channels in uprights simplify management of loose cables, while movable cable managers ease cable routing to front or back of rack. Aluminum rack secures LAN and WAN equipment,...

Read More »
Controls & Controllers

Hardware Management Console controls servers.

Rack-mounted Model 7315-CR2 provides GUI for configuring and operating multiple pSeries(TM) servers in SMP, LPAR, or clustered environments. It can create and store system and partition profiles, display system and partition resources and status, and boot, start, and stop system or individual partitions. Intel® XEON-based system is 1U tall and includes 1 GB of system memory, 40 GB minimum hard...

Read More »
Rack System accommodates various brands of equipment.
Electrical Equipment & Systems

Rack System accommodates various brands of equipment.

Offered in 9 model sizes, Rack System is available in 12, 24, and 36 Unit sizes with 24, 30, or 36 in. depths. Floating frame and modular rack-mount angles create hybrid rack configuration by holding equipment of various depths and mounting standards. Equipment can be rack-mounted with screws in tapped rails attached to front and back of rack. Sides, top, and bottom are not part of Rack...

Read More »
Open-Frame Racks accommodate networking equipment.
Electrical Equipment & Systems

Open-Frame Racks accommodate networking equipment.

With load rating of 2,500 lb, DataCom 4-post, open frame racks securely accommodate LAN/WAN equipment, voice/data equipment, routers, servers, and switches. Available with 6, 7, and 8 ft frame heights, 3 models are offered in 38, 45, and 51 rack unit sizes, respectively. EIA RS-330-D standard racks are constructed of extruded aluminum and range in weight from 70-80 lb. Racks are adjustable for...

Read More »
Racks and Consoles are seismically qualified.
Communication Systems & Equipment

Racks and Consoles are seismically qualified.

Custom 19 in. cabinets can be designed with single bay, 2-bay, 3-bay, or 4-bay configurations. Racks and consoles have front to back adjustable EIA rails or frame integrated mounting hole patterns. Vertical heights and depths are modified to customer specifications. Structures of cabinets are seismically qualified by Finite Element Analysis that permits computer based simulation and analysis of...

Read More »
VME Rack suits avionics applications.
Electrical Equipment & Systems

VME Rack suits avionics applications.

RA2064x 19 in. Airborne VME Rack is convection-cooled with operating temperature of -40°F to +169°F. Front panel has output voltage indicators (+5V, +12V, -12V, +3.3V), on-off switch, and access to 2 internal SCSI 3 1/2 in. disk drives and Flash solid-state drive. Rear panel includes MIL-C-38999 power connector and provides access to 4-slot VME64x backplane. Rack meets RTCA/DO-160D standard for...

Read More »
Triad's Launch of JSU Series Junction Box
Sponsored

Triad's Launch of JSU Series Junction Box

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics