Electronic Mixers

Electronic Mixers

Incom Polymer Fused Fiber Optics Enable Interactive Tactile Feedback Button Displays to Revolutionize Video/Audio Editing Consoles

Combing Fairlight's patented Picture Key Technology with Incom's optics delivers control surfaces that have endless design and feature possibilities LAS VEGAS and CHARLTON, Mass. - Incom, the world's largest supplier of innovative glass and polymer fused fiber optic solutions, continues to enable a cadre of variable, tactile user-interface technologies for consumer and commercial dynamic digital...

Read More »
Electronic Mixers

ClearOne to Display Newest Full Lineup of Professional Microphones at ISE 2014

ClearOne proves that pro audio will never sound the same in stand 3-A129, providing professional microphones for every conferencing application SALT LAKE CITY and AMSTERDAMÂ- – From the popular Ceiling Microphone Array to the Wireless Microphone System and the game-changing Beamforming Microphone Array, ClearOne's professional microphones provide outstanding reliability and performance,...

Read More »
Active Upconverting Mixer offers 1.5-3.8 GHz dynamic range.
Electronic Mixers

Active Upconverting Mixer offers 1.5-3.8 GHz dynamic range.

Model LT5579 has frequency range covering .9 GHz cellular bands as well as 2.6 and 3.5 GHz WiMAX frequency bands. At 2.14 GHz, it offers 27.3 dBm output IP3 linearity and 9.9 dB noise figure. It can be driven with signal levels at as much as -5 dBm without elevating its output noise floor above -158 dBm/Hz. Suited for wireless transmitters in basestations, double-balanced mixer operates from 3.3...

Read More »
Electronic Mixers

New Grass Valley Pro AV Switcher Nominated for Award

The Indigo AV mixer, a new concept in live switchers for audio-visual applications from Grass Valley, has been shortlisted for the prestigious InAVation Awards. Nominated in the category of most innovative video signal processing and management product for commercial use, the winner will be chosen by online voting from businesses in the professional audio-visual sector and presented at an awards...

Read More »
RF Mixer features operating frequency range to 3.7 GHz.
Electronic Mixers

RF Mixer features operating frequency range to 3.7 GHz.

Model LT5527 high linearity, active downconverting RF mixer simplifies design of 3G cellular basestations. At 1.9 GHz, unit offers IIP3 linearity of 23.5 dBm, conversion gain of 2.3 dB, and noise figure of 12.5 dB. Local oscillator and RF inputs operate single-ended and have built-in 50 ohm impedance, requiring few external matching components. Low-noise LO buffer allows operation at -3 dBm LO...

Read More »
Electronic Mixers

Portable Music Production Center assists keyboard players.

Powered by 3 floating-point DSPs from TI's TMS320C67x(TM) Series, Fusion Synth Workstation provides more than 200 voices of polyphony, 4 types of synthesis, multi-track hard disk recorder, built-in sampler, and library of built-in effects processing. Artists can record, edit, and manipulate sounds, as well as store samples on 40 GB hard disk. Fusion Synth Workstation is available in 61-note...

Read More »
RF Active Mixers feature operating current of 28 mA.
Electronic Mixers

RF Active Mixers feature operating current of 28 mA.

With IIP3 (Input Third-Order Intercept) of 16.5 dBm @ 900 MHz and noise figure of 11 dB, LT5526 is suited for use as downconverting or upconverting mixer and operates over bandwidth from 100 kHz to 2 GHz. Model LT5525 features on-chip RF input transformer and offers internal 50 ohm impedance matching at RF and LO (Local Oscillator) inputs, which can be driven single-ended. It features IIP3 of 21...

Read More »
Vortex Mixers offer wide range of accessories.
Electronic Mixers

Vortex Mixers offer wide range of accessories.

ThomasÂ-® Mini Vortex Mixers are suited for test tubes, flasks, beakers, and small containers. One-touch ThomasÂ-® Touch Mixer features fixed speed of 3,200 rpm. ThomasÂ-® Analog Vortex Mixers offer variable speed control from 100-3,200 rpm for gentle or high-speed mixing in continuous or touch mode operation. With variable speed control from 1,200-2,400 cycles/min, ThomasÂ-®...

Read More »
Metered Mixing System offers closed-loop flow control.
Electronic Mixers

Metered Mixing System offers closed-loop flow control.

Plural-component, Smart 2K features 3 operating modes: Master mode for closed-loop flow and ratio control of A and B components, Slave mode for ratio control of B component to regulated A component flow rate, and Manual mode. Alarm outputs provide indication of ratio, flow, and pot-life alarms, while backlit LCD display indicates flow rates, ratios, totals, alarms, and control outputs. Smart 2K...

Read More »
RF Active Transmit Mixer is suited for 3G basestations.
Electronic Mixers

RF Active Transmit Mixer is suited for 3G basestations.

Housed in 16-pin, 4 x 4 mm, surface-mount QFP package, LT5521 provides linearity and signal-to-noise performance that allows designers to build compact 3G cellular basestations. It incorporates differential input and output architecture, supporting linearity over operating frequency range of 10 MHz to 3.7 GHz. Able to be used in upconverting or downconverting application, product requires -5 dBm...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics