Electronic Drivers

Logic Functions have DQFN form factor.
Electronic Drivers

Logic Functions have DQFN form factor.

Quad-, 6- and 8-bit LCX and VCX series low-voltage logic functions reduce noise and crosstalk between I/O terminals. Chips have exposed die attach paddle underneath and visible solder joints. Products include 2.5-3.3 V bi-directional octal transceiver; 2.5-3.3 V octal buffer line driver; 2.5-3.3 V decoder/demultiplexer; 1.2-3.3 V quad dual-input and gate; and 1.4-3.3 V bi-directional octal...

Read More »
Controller/Driver Chipset suits VRM CPUs and processors.
Electronic Drivers

Controller/Driver Chipset suits VRM CPUs and processors.

Model FAN5019 multi-phase PWM controller and Model FAN5009 dual MOSFET driver form chipset that is part of VRM/VRD10.x power solution. Temperature-compensated inductor current sensing measures current and accurately sets and maintains loadline. FAN5009/FAN5019 chipset allows regulators to scale from 2, 3, or 4 phases and conveys 12 V main supply into core supply voltage.

Read More »
Electronic Drivers

Line Driver/Receiver offer data rates up to 60 Mbps.

Model SP26LV431 quad-channel, differential line driver and Model SP26LV432 quad-channel receiver are EIA/TIA-422-B compliant and provide footprint that is pin-out compatible with industry standard 26C31 and 26C32. Operating on 3.0-3.6 V, devices are suited for point-to-point or multi-drop transmission lines with up to 10 receivers/segment over links up to 4,000 ft. Receiver features open-receiver...

Read More »
Electronic Drivers

Pre-Driver ICs drive external N-Channel MOSFETs.

Pre-Driver IC Family fills need for driving either DC brush or DC brushless motors in systems with motor supply voltages as low as 7 V and as high as 60 V. Wide operating temperature range, fault diagnostics and reporting, and operation over wide supply voltage make family suited for harsh automotive environment. Each is offered in various options of surface mount packages, including low profile...

Read More »
Laser Driver handles medium reach optical communications.
Electronic Drivers

Laser Driver handles medium reach optical communications.

Suited for Vertical Cavity Surface Emitting Laser Diodes, 3.2 Gbps Model LTC5100 maintains very low noise transmission eye diagrams. Digital controller with on-chip A/D and D/A converters provides continuous closed-loop monitoring and control of critical laser parameters. Driver can be operated in standalone mode or controlled by external microprocessor via built-in I2C(TM) Serial Interface port....

Read More »
Electronic Drivers

IGBT Gate-Driver Hybrid provides plug-in solution.

Offered in 90 x 36 mm single-in-line package, 3-phase Model GDBD4410 incorporates noise-immune, pulse-transformer technology to transmit galvanic-isolated pulses to drive 6-pack IGBT inverter modules. Turnkey solution provides 7 gate-drive signals up to ±2 A peak per gate, noise immunity in dv/dt environments exceeding 50 kV/Â-µs, and outputs that provide on-chip generated negative...

Read More »
Secondary Side Drivers protect power MOSFETs.
Electronic Drivers

Secondary Side Drivers protect power MOSFETs.

Models LTC3900 and LTC3901 are rectifier drivers that drive two N-channel MOSFETs and accept pulse synchronization from primary side controller via pulse transformer. Both have timer and current sense comparators to protect external MOSFETs during normal and light load operation, power up/down, and when driver supply voltage drops too low. Model LTC3900 is for forward converter topologies, while...

Read More »
MOSFET Driver tolerates 100 V transients.
Electronic Drivers

MOSFET Driver tolerates 100 V transients.

Model LTC4440 N-channel 80 V MOSFET driver, housed in SOT-23 and 8-lead MSOP packages, offers peak pull-up output current of 2.4 A and 1.5 ohm pull-down output impedance. Unit reduces MOSFET gate drive fall and rise times to 7 ns and 10 ns, respectively, when driving 1,000 pF loads. Input logic signal is internally level-shifted to bootstrapped supply, which may function at up to 115 V above...

Read More »
Electronic Drivers

Half-Bridge Driver offers 6 A peak output drive current.

Model IX6R11 surface mount IC is optimized for high power, high frequency gate drive applications up to 650 V and 1 MHz. It drives large MOSFET and IGBT die sizes at higher frequency without need for additional discrete output transistors. Unit has 50 V/ns dV/dt noise immunity and 200 V negative voltage transient immunity. Chip enable signal is provided for controlled shutdown along with high and...

Read More »
LED Driver integrates Schottky diode on-chip.
Electronic Drivers

LED Driver integrates Schottky diode on-chip.

Model LT3465 consists of switching, constant current, white LED driver in ThinSOT(TM) package. Capable of driving up to 6 white LEDs from one Li-Ion cell, it offers efficiencies to 81% and switches at 1.2 MHz. Unit provides constant frequency PWM operation and delivers same current to each LED, regardless of variations in forward voltage drop. It offers output voltage limiting, one-pin dimming...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers