MOSFET Control/Driver IC targets automotive market.
Designed to drive 4 N-channel MOSFETs in high-side configuration with gate drive outputs that utilize current-source topology, Model A3942 provides interface between system controller and various high current loads found in automotive engine control systems. IC operates over 4.5-60 V voltage range and full automotive temperature range, making it suitable for both 12 and 24 V engine control...
Read More »Digital/Mixed-Signal Buck Controller suits Intel processors.
Supporting Intel VR11.x designs that deliver up to 150 A, CHL8100 digital mixed-signal, multiphase, synchronous buck controller can be used with CHL8500 high-frequency dual MOSFET gate driver. Designers can digitally configure switching frequency of each phase from 200 kHz up to 1 MHz. Power Designer GUI can be used to access, set, modify, and monitor parameters, which are stored in embedded...
Read More »VCSEL Driver is optimized for low power dissipation.
Model HXT4104 is 4-channel 10.3 Gbps Vertical Cavity Surface Emitting Laser (VCSEL) driver that can drive 10 mA average and 8 mA modulation current, and dissipates 91 mW of power per channel. Parallel VCSEL driver is digitally programmable via industry standard 2-wire interface, enabling control of signal peaking, modulation, and average current, in addition to providing access to temperature and...
Read More »Laser Diode Driver offers integrated Automatic Power Control.
Including power monitoring feature to keep average optical power constant during temperature changes, model SY88212L is single-supply, 3.3 V laser driver. Device is suited for datacom and telecom applications, such as LAN and MAN, with any data rates up to 2.5 Gbps. Designed with high compliance voltage, IC can be dc-coupled to laser to reduce external component count and power consumption....
Read More »
Customized Silicone Technology: For Today's and Next Generation Electronic Applications
This white paper provides and in-depth overview into the customized silicone technology for electronic protection.
Read More »
MOSFET Pre-driver suits high temperature automotive systems.
Model A3941 automotive grade MOSFET pre-driver IC is developed for industrial systems utilizing 24 V battery. Capable of driving 4 external N-Channel MOSFETs in full-bridge configuration, it is used in brush dc motor drive applications where high-currents in combination with high ambient temperatures require use of external MOSFETs. IC is rated over full automotive temperature range of -40 to 150-
Read More »MOSFET Drivers integrate adjustable LDO.
Models MAX15024/MAX15025 high-speed, single/dual MOSFET gate drivers operate from 4.5-28 V supply and can withstand transients up to 30 V. They feature propagation-delay matching of 2 nsec between channels, and less than 17 nsec from part to part. Offered in 3 x 3 mm TDFN package, devices are fully specified over -40 to 125-
Read More »Chipset enables multimonitor HDMI/DVI video distribution.
Fanout switch chipset is comprised of MAX3845, which provides switching, fanout, and cable driving for TMDS-® signals, and MAX4814E, which offers I-²C control of MAX3845 and handles all switching of DDC, 5 V, and HPD signals. Devices can be combined to create 2:4, 4:4, and 2:8 DVI switches with full I-²C control. Additionally, MAX3845 provides input equalization and output preemphasis as well...
Read More »Line Driver helps A/V installers solve HDMI problems.
Direct coupled from input to output, HDMI Line Driver utilizes CURxE Light technology to diagnose and correct corrupted communication data on HDCP and EDID channels that would otherwise degrade A/V quality. Four LED lights serve as self-diagnostic monitoring indicators to verify Hot Plug detection, +5 V status, HDCP, and EDID. Based on LED activity, installer or end-user will see if problem is...
Read More »
MOSFET/IGBT Drivers target low- to mid-power applications.
Operating with input up to 600 V, Models NCP5106, NCP5104, NCP5111, and NCP5304 provide 2 outputs for direct drive of 2 N-channel power MOSFETs or IGBTs arranged in half-bridge configuration. Units feature dv/dt immunity of 50 V/ns and are 3.3 and 5 V input logic compatible. Offered in SOIC-8 and PDIP-8 packages, devices use bootstrap technique to ensure proper drive of high-side power switch....
Read More »
Synchronous N-Channel MOSFET Driver delivers up to 5 A.
Offered in 3 x 3 mm DFN-12 package, LTC4443/-1 can sink 5 A max and source 2.4 A max for driving upper and lower power N-Channel MOSFETs over 6-9.5 V range in synchronous rectified converter topologies. Products can also drive multiple MOSFETs in parallel. Rise time of 12 nS and fall time of 8 nS, when driving 3,000 pF load, minimize switching losses. While nominal VCC undervoltage lockout is 3.2...
Read More »
Optimize Your Storage or Distribution Facility with Steel King Rack Solutions
Steel King racks are designed to meet seismic requirements in the most demanding conditions. Our durable storage products help your company save on maintenance costs. Check out our product video or download our Rack Planning eBook to learn more.
Read More »
