Electronic Drivers

Electronic Drivers

Half-Bridge MOSFET Driver supports voltages up to 28 V.

Suited for multi-phase DC/DC converters, Model AAT4910 drives both high and low-side N-channel MOSFETs. Powered from 5 V rail, device is capable of driving high-side N-channel MOSFET with up to 28 V power input. When driven low, enable input turns off driver and reduces operating current to less than 1 Â-µA. Housed in 2 x 2.1 mm SC70JW package, driver is qualified across -40 to +85°C...

Read More »
Constant Current LED Drivers deliver 1 V drop-out.
Electronic Drivers

Constant Current LED Drivers deliver 1 V drop-out.

Suited for low-voltage, general LED lighting applications, 2-terminal Models CL520 and CL525 feature fixed output currents of 20 and 25 mA, respectively. Both feature temperature-compensated output currents to maintain consistent LED brightness regardless of temperature. With max ratings of 90 V, ICs withstand transients without additional transient protection circuitry. Devices are...

Read More »
Multi-channel LED Drivers backlight LCD panels.
Electronic Drivers

Multi-channel LED Drivers backlight LCD panels.

With data exchange done at 25 MHz over serial I/O connections, TB62777FNG and TB62778FNG deliver continuous current that can be regulated for illumination in backlighting of LCD panels, TV displays, and notebook PCs as well as RGB panel LED displays. Both 8-channel, constant-current LED drivers have 3.3-5 V supply voltage range and regulate current source through one external resistor. Output...

Read More »
Electronic Drivers

LED Driver offers 3,000:1 True Color PWM dimming.

Operating as constant current LED driver, Model LT3598 can drive up to 6 strings of LEDs, each with up to ten 30 mA white LEDs in series while delivering efficiencies up to 90%. Device features input voltage of 3-30 V, programmable 200 kHz to 2.5 MHz fixed frequency, and output voltage up to 44 V. Housed in 4 x 4 mm QFN package, DC/DC converter uses 1.5 A, 45 V internal switch to provide boost...

Read More »
Electronic Drivers

LED Drivers save space in entry-level cell phones.

Available in 2 x 2.1 mm package, AAT3104 and AAT3195 4-channel, charge pump-based LED drivers deliver 16-step, 32-step, or PWM current control. They can drive up to 4 LEDs at 30 mA each, automatically switch between 1x and 2x mode, and operate at 1 MHz switching frequency. Supporting LEDs using common cathode configurations, AAT3195 comes in 3 versions with different interfaces. Drivers feature...

Read More »
Electronic Drivers

TRIAC Driver Optocouplers lower standby power.

Designed to meet regulations such as 1Watt Initiative and ENERGY STAR®, FOD41xx series eliminates RC-snubber network when used to drive snubberless discrete power TRIAC. RoHS-compliant products utilize Pb-free terminals and feature 10,000 V/Â-µs min rating for commutating and static dv/dt, protecting against noise found in industrial environments. Each optically-isolated TRIAC driver...

Read More »
Electronic Drivers

LED Controller suits multiple high-current LED topologies.

Featuring 6-100 V input voltage and 100 V max output, LT3756 DC/DC converter uses external N-channel MOSFET and can drive up to 20, 1 A white LEDs from 12 V input. High-side current sense enables use in boost, buck, buck-boost, and SEPIC/flyback topologies, and frequency is programmable from 100 kHz to 1 MHz. Delivering 70+ W, product exhibits efficiencies over 94% in boost mode. True Color...

Read More »
Electronic Drivers

LED Driver suits automotive display backlighting applications.

With ability to provide up to 150 mA constant current per channel with current-mode buck/boost DC/DC control, dual channel BD8113EFV-E2 drives white LED backlights in medium to large format automotive TFT-LCD displays. Offered in Pb-free HTSSOP-B24 package, unit operates from 5-30 V supply in -40°C to 105°C temperatures. Buck/boost configuration allows any number of LEDs to be...

Read More »
Electronic Drivers

LED Drivers illuminate consumer electronics displays.

Featuring serial-in/serial-out data transfer for dynamic displays, 8-channel Models TB62777FNG and TB62778FNG support 3.3-5 V supply voltage and regulate current source through 1 external resistor. Constant current output range is 5 mA to 40 mA; current settings for TB62778FNG can be adjusted via 7-bit serial data input. Housed in lead-free 4.4 x 5.5 mm package, drivers include thermal shutdown....

Read More »
Configurable USB for Low Noise Remote Laser Diode Control
Electronic Drivers

Configurable USB for Low Noise Remote Laser Diode Control

Intuitive Graphical Interface & Data Acquisition for Multiple Units via PC The FL593FL brings Wavelength's low noise FL500 laser diode driver under USB computer control. This full speed USB controller comes with a robust driver, a simple Windows(TM) control interface, and an easy-to-use development API for rapidly building custom applications. On-board nonvolatile memory holds operational...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers