Electronic Drivers

Line Voltage Dimmable LED Drivers can be used in wet locations.
Electronic Drivers

Line Voltage Dimmable LED Drivers can be used in wet locations.

Available in leading edge (incandescent) and trailing edge (ELV) versions, LED20W series is comprised of constant current dimmable drivers designed for LED dimming control from 100%-10%. Standard 14, 16.8, and 20 W models, featuring 100-277 Vac input and 7-40 V output, come in IP66-rated Black Magic Thermal Advantage(TM) plastic enclosures. Intended for OEM luminaires, products are designed for...

Read More »
Miniature PCB-Mount LED Drivers operate with high efficiency.
Electronic Drivers

Miniature PCB-Mount LED Drivers operate with high efficiency.

LDU series exhibits typical efficiency of 93% for 5, 7, and 14 W output models and 95% for 20 W devices. While LDU20 series provides up to 700 mA output current, LDU05/07/14 series has max output of 1,000 mA. All DC input constant current LED drivers have remote on/off control input and accommodate input from 7-30 Vdc, which needs to be at least 2 V higher than output. Dimming options include 2...

Read More »
Electronic Drivers

TI Introduces Fastest 4-A and 5-A Two-output MOSFET Drivers for Telecom and Server Power Supplies

High-performance MOSFET drivers deliver efficiency and reliability, protecting a power system from 100-V surges DALLAS - Texas Instruments Incorporated (TI) (NASDAQ: TXN) is expanding its MOSFET driver portfolio with three next-generation two-output gate drivers that improve efficiency and reliability in high-density isolated power supplies. First 120-V boot high-side/low-side MOSFET driver The...

Read More »
Electronic Drivers

Boost Converter IC drives HB LEDs in low-voltage applications.

Supplied in RoHS-compliant MSOP-10 package, ZLED7015 step-up converter integrates 35 V power switch for high brightness (HB) LEDs and supports 6-30 Vdc input range. Low-voltage feedback mechanism helps maximize operating efficiency, while soft-start function and open circuit detection protect application circuit and extend LED life. Delivering constant current operation with efficiency up to 95%,...

Read More »
Electronic Drivers

GlacialLight Exhibiting Wide Array of LED Products at the 2011 LED EXPO in New Delhi

16th November 2011, New Delhi, India - GlacialLight, a division of GlacialTech Inc., a global provider of PC cooling, power supplies, power drivers and LED lighting, extends an invitation to all business and media partners around the world to attend their display at the LED EXPO, to be held at Pragati Maidan in New Delhi, India, 1-3 December 2011. Event: LED EXPO Venue: Pragati Maidan, New Delhi,...

Read More »
Electronic Drivers

ON Semiconductor Introduces Highly Optimized LED Lighting Chipset

Two new devices help designers optimize solutions for a wide range of LED applications PHOENIX, Ariz., U.S. - China International Forum on Solid State Lighting in GUANGZHOU, China. - Nov. 8, 2011 - ON Semiconductor (Nasdaq: ONNN), a premier supplier of high performance silicon solutions for energy efficient electronics, has introduced two new LED drivers to help designers optimize their solutions...

Read More »
Low-Profile LED Driver ICs target fluorescent tube replacement lights.
Electronic Drivers

Low-Profile LED Driver ICs target fluorescent tube replacement lights.

Supplied in eSIP(TM)-7F (L package) with 2 mm profile, LinkSwitch(TM)-PH targets LED replacements for fluorescent tubes. Products can be used where low-profile packages are required to fit into space available behind LED circuit board as well as other applications where board height is constrained. Heat transfer tab is located on top of these single-stage, primary-side controlled LED driver ICs,...

Read More »
Dimmable LED Driver IC works with any standard light switch.
Electronic Drivers

Dimmable LED Driver IC works with any standard light switch.

Supplied in SOIC-8 or -16 package, HV9801A drives LEDs and dims lamp brightness to one of 4 preset levels via light switch toggling. Average-mode current control method, which does not require any loop compensation or high side sensing, provides accurate response to input voltage fluctuations, delivers accuracy exceeding 97%, and provides line and load regulation of LED current. Delivering...

Read More »
Austriamicrosystems Launches New LED Drivers and Optimized Backlight Power Supply to Provide Best Efficiency in LED TVs
Electronic Drivers

Austriamicrosystems Launches New LED Drivers and Optimized Backlight Power Supply to Provide Best Efficiency in LED TVs

LED ICs to be demonstrated at FPD Japan, the leading display show Unterpremstaetten, Austria, and Yokohama, Japan, (October 24, 2011 - austriamicrosystems (SIX: AMS), a leading global designer and manufacturer of high-performance analog ICs, today announced the release of the latest additions to the company's comprehensive LED TV drivers and support IC portfolio. The new ICs include three LED...

Read More »
Laser Diode Driver suits industrial and medical applications.
Electronic Drivers

Laser Diode Driver suits industrial and medical applications.

Requiring +5 Vdc, Model 784 CW and Pulsed Laser Diode Driver offers variable pulse widths from 600 ns to CW and power capabilities up to 125 W with adequate cooling. RoHS-compliant unit features max current output of 5 A and compliance voltage to 2.5 V. Measuring 3.69 x 3.05 x 0.87 in., driver includes current limit and thermal shutdown protection. Device is suited for high current single laser...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers