Electronic Drivers

LED Drivers deliver 75, 150, and 300 W outputs.
Electronic Drivers

LED Drivers deliver 75, 150, and 300 W outputs.

Featuring input voltage range of 277-480 Vac, LED drivers include constant current Models TSC-75 and TSC-150W with both fixed and dimmable outputs, and constant voltage Model TSV-300W. All feature aluminum housings and are IP67-rated, making them suitable for applications subject to moisture. UL recognized and CE certified, drivers offer over-voltage, over-current, and short circuit protection...

Read More »
Electronic Drivers

LED Backlight Driver offers power efficiencies for LCDs.

Supplied in plastic, 16-pin SMT SOIC, RoHS-compliant and halogen-free LX27901 provides LED driving capabilities in televisions based on LCD Integrated Power Supply (LIPS) architecture. Non-dissipative architecture promotes power efficiency while enhancing backlight performance. Along with 3 selectable drive modes, features include ACU_BRITE(TM) algorithm for dimming, synchronous regulation to...

Read More »
Electronic Drivers

Compact LED Backlight Drivers are intended for smartphone LCDs.

Supplied in 12-ball, 1.7 x 1.4 x 0.5 mm WL-CSP package with 0.4 mm pitch, AS3674 and AS3490 are inductive boost converters that exhibit 90% peak efficiency and require 4 external components. Able to control 5 current sources with each driving 2 LEDs in series, AS3674 is 2 MHz DC/DC switch mode step-up converter that allows current for LED channels to be set by external resistor with max of 25 mA...

Read More »
AC-DC LED Driver offers 0-10 V dimming capability.
Electronic Drivers

AC-DC LED Driver offers 0-10 V dimming capability.

Suited for indoor/outdoor lighting applications, 50 W Model PDA050W-450G is equipped with 4 constant current outputs of 450 mA at nominal output voltage of 24.5 Vdc. With AC input range of 90-304 Vac, driver can be operated at standard North American mains voltages of 120 or 277 Vac for residential, commercial, and industrial applications. Water-resistant and fully potted with IP65 rating, driver...

Read More »
LED Drivers come in integration-ready F-Can packages.
Electronic Drivers

LED Drivers come in integration-ready F-Can packages.

Featuring F-Can sizes, LEG series offer constant-current performance in 75, 100, 120, and 150 W standard models. Dimmable versions are also available. Enclosure offers flexibility for use in existing fixture designs, and series can be used by OEMs in new offerings or retrofitted in field. Input voltage ranges from 120-277 Vac, and Black Magic Thermal Advantage(TM) metallic enclosures are rated to...

Read More »
Electronic Drivers

LED Drivers suit outdoor lighting applications.

GP-LS200P series regulates voltage and power consumption with 87-90% efficiency and transforms AC voltage from 90-295 V into useable DC voltage. Comprised of 4 models, series offers DC voltage output from 12-48 V and maintains optimal temperatures with cooling via free air convection. PFC of power driver maintains clean and pure sine waveform of current to improve electric power quality,...

Read More »
Electronic Drivers

LED Drivers enhance LCD TV picture quality.

With internal lighting timing algorithms, MSL2164 and MSL2166 eliminate 3D ghosting and flickering effects on LCD TVs. Drivers work with Atmel AVR® MCUs, which process timing and dimming instructions. Able to drive up to 16 parallel strings of LEDs, products incorporate power management and backlight control along with multiple dimming modes for 3D, scanning, and zone dimming edge-lit LCD...

Read More »
Electronic Drivers

Single String White LED Driver has fault-tolerant design.

Supplied in eMSOP-10 or eTSSOP-16 package with integrated current-mode boost converter, internal power switch, and current sink, single-output A8513 backlights LCDs in automotive/consumer designs. Driver can operate from single 4.5-40 V power supply to accommodate start/stop, cold crank, and load dump requirements, and 2 MHz boost converter switching frequency enables operation above AM radio...

Read More »
Boost LED Driver IC delivers sub-µs PWM dimming.
Electronic Drivers

Boost LED Driver IC delivers sub-µs PWM dimming.

Used for LCD backlighting, 3-channel HV9989 features PWM dimming control algorithm that regulates each channel's output current down to sub-Â-µs dimming pulses. This permits dimming at frequencies outside audible range without shift in color correlated temperature. Powered by 40 V linear regulator, IC drives boost or SEPIC converters in continuous or discontinuous conduction mode. Three 1...

Read More »
Electronic Drivers

Gate Driver IC drives GaN FETs and MOSFETs in low-side applications.

Offered in 6-pin SOT-23 package and 6-pin LLP package with exposed pad, LM5114 drives Gallium-Nitride (GaN) power field-effect transistors (FET) and MOSFETs. Independent source and sink outputs from 5 V supply for optimal rise and fall times promote efficiency, while +4 to +12.6 V single power supply range supports range of applications. Other features include 0.23 ohm open-drain, pull-down, sink...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers