Electronic Drivers

Electronic Drivers

Isolated Half-Bridge Gate Drivers have 50-year operating life.

Respectively providing 3 kV rms isolation in narrow-body, 16-lead SOIC and 5 kV rms reinforced isolation in wide-body, 16-lead SOIC, ADuM3223 and ADuM4223 use iCoupler® digital isolator technology, feature sub 55 nsec propagation delay and less than 5 nsec delay matching, and offer 700 Vpeak galvanic isolation between high- and low-side outputs. With 2 independent isolation channels,...

Read More »
ERG Lighting is Exclusive North American Distributor for Led Drivers for Indoor & Outdoor Solid State Lighting from Gre Alpha® Electronics, Ltd
Electronic Drivers

ERG Lighting is Exclusive North American Distributor for Led Drivers for Indoor & Outdoor Solid State Lighting from Gre Alpha® Electronics, Ltd

ENDICOTT, NY, - The ERG Lighting division of Endicott Research Group, Inc. is now offering the SLD, XLD and XLA Series of LED drivers from GRE Alpha® Electronics, Ltd., Gainesville, GA, a specialist in the design and manufacture of solid state lighting power supplies for architectural, signage, retail, office, street and LED strip lighting. These driver series are available with power from...

Read More »
AC-DC LED Driver provides constant current output.
Electronic Drivers

AC-DC LED Driver provides constant current output.

Equipped with 4 outputs of 350 mA at nominal output voltage of 24.5 Vdc, Model PDA037W-350G offers 0-10 V dimming capability and is suited for indoor/outdoor lighting applications. Unit is water-resistant and fully potted with IP65 rating. Featuring AC input range of 90-304 Vac, driver delivers minimum efficiency ratings ranging from 82% at 120 Vac input to over 84% at 277 Vac input. Device...

Read More »
AC/DC LED Driver suits harsh environment lighting applications.
Electronic Drivers

AC/DC LED Driver suits harsh environment lighting applications.

Featuring universal input of 100-304 Vac, Model PDA080B-48VG delivers max output of 80 W at 48 Vdc and 1.67 A. External IP65-rated driver is water-resistant and fully potted, with operating temperature of -40 to +60°C. Constant voltage design enables users to power array of individual luminaires via driver ICs. Measuring 241 x 43 x 30.5 mm, device boasts minimum average efficiency ratings...

Read More »
LED Drivers provide typical efficiency of 92%.
Electronic Drivers

LED Drivers provide typical efficiency of 92%.

Featuring universal input voltage of 100-277 Vac, LED-M Series includes 40, 60, 75, 96, 100, and 150 W models. Units come in constant-current and constant-voltage versions, as well as dimmable versions with 3-wire dimming. Drivers include over-voltage, over-current, and short circuit protection with automatic recovery. UL recognized and CE certified, LED-M Series has IP67-rated aluminum housing...

Read More »
Electronic Drivers

Pulsed Pockels Cell Driver features miniature design.

Measuring 0.7 x 1.3 x 2.0 in., Model PCD-3-20 utilizes FET drive circuitry which delivers 2–3.2 kV pulse to 30 pF load in less than 20 ns. Miniature solid-state unit is suited for use in ultra-compact Q-switched lasers or compact optical systems where size and weight are key considerations. Input voltage is +12 V, and other input and output voltage ranges are available.

Read More »
LED Driver IC replaces 100 W A19 incandescent bulbs.
Electronic Drivers

LED Driver IC replaces 100 W A19 incandescent bulbs.

Featuring non-isolated, 93% efficient design, Model DER-322 drives nominal LED string voltage of 78 V at 230 mA from input voltage range of 195-265 Vac. Device fits inside A19 form factor and is EN61000-3-2 C (D) compliant. With PFC and CC conversion combined into single switching stage, design enables miniaturization and eliminates electrolytic input bulk capacitors. PF above 0.95 makes driver...

Read More »
WAC Lighting to Unveil New LED Lighting Designs at 2012 Lightfair International
Electronic Drivers

WAC Lighting to Unveil New LED Lighting Designs at 2012 Lightfair International

Las Vegas - Continuing to lead the industry with the state of the art solid-state lighting technology, WAC Lighting will unveil many new lighting designs at 2012 Lightfair International. WAC will exhibit its line at Booth 1614 in the Las Vegas Convention Center from May 9 through May 11. WAC's LED luminaires offer improved beauty, energy efficiency, sustainability, safety and performance. These...

Read More »
Programmable LED Drivers power high-current arrays.
Electronic Drivers

Programmable LED Drivers power high-current arrays.

Included in Ozone Series, UL-certified model RSOZ070-35 can power LED arrays from 20-33 Vdc and offers programmable output current that can be set from 1,000-2,600 mA. Output is also dimmable using variety of control standards, including analog 0-10 V input, DALI, or PWM. Along with model-specific programmable fade in/out and programmable 5-step dynamic dimming cycles that automatically adjust...

Read More »
Electronic Drivers

Off-Line Controller supports non-dimmable LED lighting.

Featuring primary side sensing, Model TPS92310 shrinks-to-fit LED retrofit bulbs, including A19, PAR30/38, and GU10. Constant current driver features AC input voltage that supports all common line voltages. Adaptive constant on-time mode provides inherent PFC with no external components, while peak current control mode delivers low LED current ripple to minimize stroboscopic effects. With...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers