Electronic Drivers

Electronic Drivers

LED Drivers feature boost controller and I2C interface.

With greater than 92% power efficiency for up to 20 W LED backlit LCD displays, 8-channel Models MSL3080/86/88 are suitable for medical, avionics, military, kiosk, and automotive displays. When combined with AVR® MCUs, drivers provide fault and system monitoring as well as over 5000:1 PWM dimming. MSL3080 allows designers to operate internal current sinks in parallel for LED currents up to...

Read More »
Electronic Drivers

Isolated Gate Driver doubles device lifetime.

With 2.5 A peak output current andÂ- max propagation delay of 300 ns, Model ISO5500 drives IGBTs and MOSFETs with power ratings to 150 A and 1,200 V. Input TTL logic and output power stage are separated by capacitive, SiO2 isolation barrier that doubles lifetime of device compared to optocouplers and magnetic isolators. When used with isolated power supplies, device blocks high...

Read More »
Electronic Drivers

Allegro MicroSystems, Inc. Announces New LED Lighting Series

High Voltage Capacity Allowing Direct Connection to a Wide Range of Supply Voltages Worcester, MA - Allegro MicroSystems, Inc. announces the release of a new simple and efficient family of LED driver ICs that can be configured as buck or buck-boost voltage converters. The LC5220D/S LED series is offered by Allegro and manufactured and developed by Sanken Electric Co., Ltd. in Japan. This new...

Read More »
Rugged AC/DC LED Drivers are capable of startup at -55°C.
Electronic Drivers

Rugged AC/DC LED Drivers are capable of startup at -55°C.

Supporting SSL technology integrationÂ- in cold climates and high altitudes, AMERx-CAZ series can operate in constant current or constant voltage modes. Power supplies accept 90–305 Vac at 47–440 Hz or 120–430 Vdc (surge up to 440 V) input and deliver output power from 61–151 W and currents of 1.8–6.3 A. Delivering efficiency rates as high as 91%, products come in...

Read More »
Electronic Drivers

Buck LED Driver provides constant current output.

With 6–48 V input supply voltage, 3.0 A Model A6211 integratesÂ- high-side N-channel MOSFET switch for DC-to-DC stepdown conversion. True average current is output using cycle-by-cycle, controlled on-time method. LED current is user-configurable by external current sense resistor, allowing output voltage to be set to optimize constant-current supply for variety of LED array...

Read More »
Wide-Input, High-Power LED Driver offers multiple dimming modes.
Electronic Drivers

Wide-Input, High-Power LED Driver offers multiple dimming modes.

Supplied in 7 x 7 mm, 48-pin LLP™, LM3463 operates from 12–95 V and features multiple dimming control modes:Â- PWM input signals, analog-to-PWM input control, and 4-byte data code. Dynamic headroom control improves system efficiency by automatically adjusting LED supply to lowest level required for LED current conduction. While one driver handles up to 6 strings with up to 28...

Read More »
Electronic Drivers

LED Backlight Unit Driver combines embedded FET with IC.

Intended for TV and monitor applications, Model MAP3301 integrates 400 VÂ- internally dimming MOSFET with low RDS(on) of less than 2.5 Ω at VGS = 10 V. Single-channel unit can drive multiple LEDs utilizing high voltages by separating IC input voltage from boost input voltage. Housed in SOIC-15 pin package, hybrid operates from 8.5–33 V, and includes PWM and analog dimming, auto restart...

Read More »
LED Driver Reference Design features power factor of 0.98.
Electronic Drivers

LED Driver Reference Design features power factor of 0.98.

Offering reference design for 18 W, 88%-efficient, non-isolated A19 LED driver based on LNK460VG IC from LinkSwitch(TM)-PL family, Model DER-323 is suitable for 100 W incandescent bulb replacement and is optimized for low-line 90-135 Vac operation. EN61000-3-2 (C) compliant design utilizes buck-boost converter topology that fits inside A19 bulb. Because LinkSwitch-PL ICs combine both PFC and CC...

Read More »
Electronic Drivers

High Current LED Driver targets automotive, industrial markets.

Supplied in 16-pin TSSOP, A6268 DC-DC converter controller provides programmable constant current output for driving LEDs in series. Input voltage range makes this IC suited for start/stop designs as well as handling double battery and load dump conditions. Direct PWM control is possible via enable input, and switching frequency is programmable from 100-700 kHz. Driver can be configured as ground...

Read More »
High-Voltage Line Driver IC suits small IO-Link devices.
Electronic Drivers

High-Voltage Line Driver IC suits small IO-Link devices.

Supplied in 2.5 x 2.5 mm WL-CSP, ZIOL2211 has high-voltage I/O channel that meets physical layer requirements of sensor and actuator systems used in factory and process automation applications. Product has -40 to +85°C operating range, is fully programmable for settings ranging from slew rate and current to diagnostics features, and supports IO-Link Specification v1.0 and v1.1. IC suits all...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers