Electronic Drivers

Electronic Drivers

N-ch MOSFET targets lithium-ion battery protection circuits.

Housed in SOT-23F package measuring 2.9 x 2.4 mm, Model SSM3K324R utilizes UMOSVII-H process to minimize gate switch charge and on-state resistance, resulting in optimized power efficiency. Surface mount device featuresÂ- input capacitance of 200 pF with max RDS(on) of 109 mΩ at VGS=1.8 V and 56 mΩ at VGS = 4.5 V. MOSFET is designed for use in lithium-ion battery protection...

Read More »
Electronic Drivers

High and Low Side Gate Driver IC has 700 V absolute max rating.

Both high side and low side outputs ofÂ- IX2113 feature integrated power DMOS transistors, each capable of sourcing and sinking over 2 A of gate drive current. High-voltage level shift circuitry allows low-voltage logic signals to drive N-channel power MOSFETs and IGBTs in high side configuration operating up to 600 V. Manufactured on HVIC Silicon on Insulator (SOI)  process,...

Read More »
Electronic Drivers

DC/DC LED Driver suits automotive and area lighting.

With 4.5–75.0 V input voltage, adjustable switching frequency up to 2 MHz, and low-side adjustable current sense from 50–500 mV, Model TPS92690 is suitable for automotive headlamps, fog lights, and general-purpose area lighting. Constant-current N-channel MOSFET controller supports step-up or step-up/step-down LED driver topologies. Separate PWM and analog inputs interface with common dimming...

Read More »
Electronic Drivers

LED Automotive Driver offers independently controlled channels.

Integrating current-mode boost converter with internal power switch and 10 IÂ-²C programmable current sinks, Model A8517 provides 5,000:1 contrast ratio PWM dimming at 200 Hz. IC operates from 4.5–36 V, and can withstand up to 40 V load-dump conditions encountered in automotive systems. I²C interface allows user to set LED currents individually, up to 60 mA per LED channel. Housed...

Read More »
Electronic Drivers

Power MOSFETS and ICs from Advanced Power Electronics Corp. Now to Be Available through Premier Farnell

Competitive pricing; excellent performance San Jose, CA – Advanced Power Electronics Corp. (USA), a leading Taiwanese manufacturer of MOS power semiconductors for DC-DC power conversion applications, today announced that it has signed a franchise deal with Premier Farnell plc (LSE:pfl), a leading high service distributor of electronic components and host of the industry-leading element14...

Read More »
Dual Gate Driver ICs operate from 4.5-35 V.
Electronic Drivers

Dual Gate Driver ICs operate from 4.5-35 V.

Available in 8-lead SOIC package, Model IX4426 is configured as dual inverting driver, while Model IX4427 is configured as dual non-inverting driver, and Model IX4428 is configured with one inverting and one non-inverting driver. Each output is capable of sourcing and sinking 1.5 A. Inputs are TTL and CMOS compatible as well as immune to latch-up. Operating from -40 to +125°C, ICs are...

Read More »
Constant-Current LED Drivers have line voltage dimming.
Electronic Drivers

Constant-Current LED Drivers have line voltage dimming.

Model LED-40W-TL drivers feature leading edge and trailing edge dimming with less than 10% up to 100% dimming range. Offered in 5 models with different output currents, 40 W drivers feature input voltage of 120 Vac, while 230 Vac versions are also available. Drivers' Black Magic Thermal Advantage™ plastic enclosures are IP66 rated. Products also provide overvoltage, overcurrent, and short...

Read More »
LED Driver ICs work with non-dimmable GU10 bulbs.
Electronic Drivers

LED Driver ICs work with non-dimmable GU10 bulbs.

LYTSwitch™-0 ICs for non-isolated, non-dimmable bulbs in space-constrained applications feature efficiencies of more than 90%. Units also typically deliver constant current of more than ±5% regulation. With power factor greater than 0.8 at 115 Vac and 0.55 at 230 Vac, ICs comply with ENERGYSTAR™ V1 draft 3 standards for North America and Ecodesign Directive Lot 19 part 2 for...

Read More »
Electronic Drivers

LED Drivers include built-in step dimming function.

Covering DC output range of 12–57 Vdc, GP-LP060P Series includes 6 models thatÂ- deliver up to 60 W of power and include 2-stage active PFC. Step dimming function for constant current and constant voltage can be controlled through AC power switch. With power conversion efficiency up to 86%, drivers offer AC input range of 90–305 Vac or DC input from 127–430 Vdc. Units...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers