Electronic Drivers

Electronic Drivers

Future Electronics Promotes the MIC58xx Series of Latched Drivers from Micrel Semiconductor

Pointe Claire, QuebecÂ- – Future Electronics, a global leading distributor of electronic components, promotes the MIC58xx Series of latched drivers from Micrel Semiconductor. The MIC5891 Series includes the MIC5891YN, an 8-bit serial-input latched driver with a 15 V 5 MHz typical data input rate, available in a DIP-16 package. The MIC5891 latched driver is a high-voltage, high current...

Read More »
Electronic Drivers

WEC7 WLAN Driver is available for Marvell SDIO Wi-Fi chipset.

OfferingÂ- 2.4 GHz 802.11b/g/n Extensible STA functionality, Marvell 88W8787 SDIO-Wi-Fi Windows Embedded Compact 7 (WEC7) Driver is integrated with Microsoft native SDIO stack and features NDIS 6.0 support, static and DHCP configuration support, as well as OPEN/WEP64/WEP128/WPA-TKIP/WPA2-AES/WPA2-AES or TKIP security modes. Integrated with Microsoft native WPA/WPA2-PSK...

Read More »
Electronic Drivers

LED Drivers support front and rear automotive lights.

Designed for rear lights, Model TPS92630-Q1 provides single LED short detection and full diagnostic capabilities, giving designers flexibility to meet different countries' traffic regulations. Device supports up to 15 IC connections on one bus, as well as easy control logic without extra microcontroller. For front lights, Model TPS92602 offers 2-channel switching. Device supports both linear...

Read More »
Electronic Drivers

GlacialLight Presenting LED Lights and Drivers at 19th GuangZhou International Lighting Exhibition

Surface Mounted Down lights, Panel Lights and LED 50W Bay Lights Latest Additions to Indoor Lighting Taipei, TaiwanÂ- – GlacialLight, the lighting division of GlacialTech Inc., is attending GuangZhou International Lighting Exhibition in Guangzhou, China on June 9th to 12th, 2014 to showcase its energy efficient lighting products and introduce its latest surface mounted down lights, bay...

Read More »
LED Drivers are designed for use in hazardous location fixtures.
Electronic Drivers

LED Drivers are designed for use in hazardous location fixtures.

Available in constant-current, dimming, and constant-voltage versions, LED25W-HL (25 W) and LED40W-HL (40 W) carry Type HL rating from UL and IP66 rating for dry and damp locations. Both come in V5A cases, feature internal thermal protection, and offer option of leads that exit through bottom or side. Other features include 100–277 V universal input, Black Magic Thermal Advantage™ plastic...

Read More »
Constant Voltage LED Drivers offer 0-100% Triac dimmable control.
Electronic Drivers

Constant Voltage LED Drivers offer 0-100% Triac dimmable control.

Compatible with leading- and trailing-edge dimmers, 6 mains-dimmable LED drivers of PCV series offer power ratings from 20–90 W. All models have both 12Â- and 24 V output versions as well as screw terminals that facilitate connection. Fully isolated within fire resistant plastic cover rated to IP44, drivers integrate over current, short circuit, and overvoltage protection...

Read More »
N-Channel MOSFET (150 V) comes in 2 x 2 mm package.
Electronic Drivers

N-Channel MOSFET (150 V) comes in 2 x 2 mm package.

Supplied in thermally enhanced PowerPAK® SC-70 package with 2 x 2 mm footprint, Vishay Siliconix SiA446DJ 150 V n-channel MOSFET increases efficiency in space-constrained applications by reducing conduction and switching losses. RoHS-compliant, halogen-free, and 100% RG- and UIS-tested product, built on ThunderFET® technology, offers low max on-resistance of 177 mΩ at 10 V, 185 mΩ...

Read More »
Electronic Drivers

MOSFET Driver extends run times of battery-powered products.

Designed to address wide variety of applications including motor drives, UPS, and DC/AC inverters, 85 V MIC4605 Half-Bridge MOSFET Driver features adaptive-dead-time circuitry, which actively monitors half bridge to minimize time between high and low side MOSFET transitions. Anti-shoot-through circuitry prevents erroneous inputs and noise from turning both MOSFETs on at same time. Applications...

Read More »
Electronic Drivers

LED Remote Power Drivers promote system design flexibility.

Combining digital power conversion, constant current drivers, and dimming control into oneÂ- intelligent LED power supply, Trinity™ 3-in-1 platform enhances flexibility in lighting applications where 0–10 V controls are common but only small numbers of LED fixtures are grouped together on one switch. Analog remote power drivers, with as many control zones as power...

Read More »
Electronic Drivers

Power Conversion Driver/MOSFET works with high-performance FPGAs.

Model ET4040 monolithic 40A driver plus synchronous MOSFET powertrain enables design of point-of-load power solutions. It provides continuous output current over -40 to + 85°C temperature range and input from 4.5-14 V. On-board monolithic current sense maximizes reliability and thermal performance. Powering FPGA core supply rails in single- or multi-phase configurations, unit also suits...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers