Line Driver drives 4 TTL/CMOS signals into 50 ohm loads.
With 10 kohm input impedance, self-contained Model PRL-444 can receive signals from devices with low drive current such as sensors, PC-based digital I/O cards, and optical transceivers. Each input has 10 kohm pulled up to 2.5 V so it can also be driven by open-collector devices. With 50 ohm terminations, all outputs can drive 100 ft of 50 ohm cables at clock rates greater than 60 MHz. Driver...
Read More »
Line Driver drives 4 TTL/CMOS signals into 50 ohm loads.
With 10 kohm input impedance, self-contained Model PRL-444 can receive signals from devices with low drive current such as sensors, PC-based digital I/O cards, and optical transceivers. Each input has 10 kohm pulled up to 2.5 V so it can also be driven by open-collector devices. With 50 ohm terminations, all outputs can drive 100 ft of 50 ohm cables at clock rates greater than 60 MHz. Driver...
Read More »
Quad-Channel Line Driver is suited for laboratory use.
Featuring 10 kohm input impedance, PRL 444 self-contained buffer pod drives 4 TTL/CMOS signals into 50 ohm loads and can receive signals from devices with low drive current. Unit comes in aluminum housing with ac adapter and BNC or SMA signal connectors. With 50 ohm load terminations, all outputs can drive 100 ft of 50 ohm cables at clock rates exceeding 60 MHz. Applications include digital...
Read More »
Quad-Channel Line Driver is suited for laboratory use.
Featuring 10 kohm input impedance, PRL 444 self-contained buffer pod drives 4 TTL/CMOS signals into 50 ohm loads and can receive signals from devices with low drive current. Unit comes in aluminum housing with ac adapter and BNC or SMA signal connectors. With 50 ohm load terminations, all outputs can drive 100 ft of 50 ohm cables at clock rates exceeding 60 MHz. Applications include digital...
Read More »
7 Steps to Optimize Your Spring Design for Your Next Project
This white paper provides an in-depth overview into how to optimize a compression spring design in seven steps.
Read More »
MOSFET Driver suits ATX and SMPS power supplies.
Post regulation, dual N-Channel MOSFET Driver, Model NCP4330 features drive outputs for series FETs and free-wheeling synchronous FETs. It offers efficient means of deriving 3.3 V from 5 V power train while not requiring additional windings or terminals on power supply's power transformer. Secondary ac signal directly feeds NCP4330 to minimize power dissipation. Driver includes soft switching,...
Read More »
MOSFET Driver suits ATX and SMPS power supplies.
Post regulation, dual N-Channel MOSFET Driver, Model NCP4330 features drive outputs for series FETs and free-wheeling synchronous FETs. It offers efficient means of deriving 3.3 V from 5 V power train while not requiring additional windings or terminals on power supply's power transformer. Secondary ac signal directly feeds NCP4330 to minimize power dissipation. Driver includes soft switching,...
Read More »
White LED Driver delivers 700 mA with over 90% efficiency.
Inductorless fractional charge pump, Model LTC3215 features multi-mode architecture that automatically switches between 1, 1.5, or 2x boost modes by monitoring voltage across LED current source and switching modes only when ILED dropout is detected. Built-in soft-start circuitry prevents excessive inrush current during start-up. Housed in 3 x 3 mm, 10-lead DFN package, Model LTC3215 offers...
Read More »
White LED Driver delivers 700 mA with over 90% efficiency.
Inductorless fractional charge pump, Model LTC3215 features multi-mode architecture that automatically switches between 1, 1.5, or 2x boost modes by monitoring voltage across LED current source and switching modes only when ILED dropout is detected. Built-in soft-start circuitry prevents excessive inrush current during start-up. Housed in 3 x 3 mm, 10-lead DFN package, Model LTC3215 offers...
Read More »
N-Channel MOSFET Drivers feature 1 A drive capability.
Models SiP41103, SIP41104, and SiP41105 drive lower and upper MOSFETs in half-bridge configuration, and work in systems with supply voltages from 4.5-50 V. Units operate at switching frequencies of 250 kHz to 1 MHz with driver impedance of less than 1 ohm. Equipped with brake function for motor drive applications, Model SiP42101 operates at 50 kHz. Break-before-make logic prevents shoot-through...
Read More »
N-Channel MOSFET Drivers feature 1 A drive capability.
Models SiP41103, SIP41104, and SiP41105 drive lower and upper MOSFETs in half-bridge configuration, and work in systems with supply voltages from 4.5-50 V. Units operate at switching frequencies of 250 kHz to 1 MHz with driver impedance of less than 1 ohm. Equipped with brake function for motor drive applications, Model SiP42101 operates at 50 kHz. Break-before-make logic prevents shoot-through...
Read More »
Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment
Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.
Read More »
