Electronic Converters

Electronic Converters

Media Converters target Gigabit networks.

Offered in stand-alone or Point System chassis card form factors, GETF-110 Series integrates fiber optic cabling into 1,000 Mbps UTP environments. Copper-to-fiber converters offer Transparent Link Pass Through and Remote Fault Detect, preventing them from isolating head-end device from link failures at remote-end by monitoring status of copper and fiber links. Fiber Loopback enables devices to...

Read More »
LVDT/RVDT-to-Digital Converter is offered on PC-104 card.
Electronic Converters

LVDT/RVDT-to-Digital Converter is offered on PC-104 card.

Operating over 360 Hz to 10 kHz frequency range, DSP-based 73LD4 includes 6 independent, transformer-isolated, programmable LVDT/RVDT tracking converter measurement channels. Each channel offers 16-bit resolution, ±0.025% FS accuracy, digital velocity output, incremental encoder (A+B) outputs, and wrap-around self-test. Product also includes 16 programmable DIO channels, latch feature for...

Read More »
Video Converter has built-in timebase corrector.
Electronic Converters

Video Converter has built-in timebase corrector.

Model TR-50 video standards converter changes video signals such as PAL, NTSC, and SECAM from one TV system into another. Product features automatic input system detection, selectable PAL and NTSC color bar generator, and power button with LED indication. Housed in metal box measuring 8 x 1Â-¼ x 5 in. and weighing 1.5 lb, converter offers 12 Vdc operation at 500 mA or 110 or 220/240 V and...

Read More »
Electronic Converters

Ethernet Fiber Media Converter helps build fiber links.

Supplied in IP31-rated, 70 x 30 x 89 mm aluminum case, JetCon1301 Industrial 10/100Base-TX to 100Base-FX Multi-/Single-Mode fiber media converter can operate in switching converter or pure converter modes. Store-and-forward technology, implemented in switching converter mode, filters out abnormal packets to maintain network performance. In pure converter mode, unit only converts signal between...

Read More »
Ethernet Switch has multimode ST fiber optic converter.
Electronic Converters

Ethernet Switch has multimode ST fiber optic converter.

Industrial Ethernet network media converter, ADAM-6541/ST, provides fiber Ethernet connection over distances up to 2 km through environments with potential for significant EMI. It features ST fiber optic connectors and shielded RJ-45 wired Ethernet connector. Along with auto-negotiated 10/100 Mbps wired network speeds, switch offers full/half duplex flow control, auto-configured MDI/MDI-X...

Read More »
ADC simplifies front-end signal conditioning.
Electronic Converters

ADC simplifies front-end signal conditioning.

Incorporating temperature sensor that offers 1/30°C resolution and 2°C absolute accuracy, Model LTC2498 delta-sigma ADC has front-end design that directly digitizes high impedance sensors. Easy Drive(TM) design results in zero average differential input current, allowing measurements without need for internal buffer. ADC is configurable with 8 differential or 16 single-ended input...

Read More »
A/D Converter operates in temperature range of -40 to +85°C.
Electronic Converters

A/D Converter operates in temperature range of -40 to +85°C.

Available in Pb-free 44-pin PQFP package, Model AS1534 parallel interface A/D converter with low power consumption has less than -78 dB THD, making it suitable for battery powered devices and portable data acquisition systems. Design engineers can choose 8-channel single-ended mode or fully differential 4-channel mode. Unit offers 12-bit resolution on each of 8 input channels and features 200...

Read More »
Down Converter operates over frequency range of 2-18 GHz.
Electronic Converters

Down Converter operates over frequency range of 2-18 GHz.

Suitable for Electronic Warfare and Electronic Counter Measures, module down-converts broadband RF input signal to UHF frequency on IF output. High isolation buffer amplifier at LO input, along with tight filtering on RF, LO, and IF ports, minimizes spurious signals at all inputs and outputs. Typical performance for down converter includes conversion gain of 20 dB, noise figure of 5 dB, input one...

Read More »
Electronic Converters

Transition Networks Provides Customers with Easy Network Upgrade Path with Expansion of SFP Media Converters

Both Pluggable Optics and SFP-based Converters Enable Companies to Leverage Fast Ethernet and Gigabit Ethernet Applications MINNEAPOLIS, Aug. 23 / The conversion technology and switching expert, Transition Networks Inc., a wholly owned subsidiary of Communications Systems, Inc., today announced a significant expansion to its popular SFP media converter product line, helping customers to easily...

Read More »
Repeater and Converter operate in harsh environments.
Electronic Converters

Repeater and Converter operate in harsh environments.

With operating temperature range of -40 to 85°C, ADAM-4510I isolated RS-422/485 repeater and ADAM-4520I isolated RS-232 to RS-422/485 converter feature automatic RS-485 data flow control, 3,000 Vdc isolation protection, surge protection RS-485 data line, transmission speed up to 115.2 Kbps, and networking up to 1,200 m. Mountable on DIN-rail, panel, or piggyback, they have space for...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers