Electronic Converters

Analog to Digital Converters have sampling speed of 73 ksps.
Electronic Converters

Analog to Digital Converters have sampling speed of 73 ksps.

Available in 8-pin SOIC package, Series AS1526/27 of 10-bit, single-channel A/D converters are suited for battery-powered devices and portable data acquisition systems. Model AS1526 features internal 2.5 V reference consuming 4 mW (3 V), while Model AS1527 requires external reference and uses less than 3 mW (3 V) at 73 ksps sampling rate. Operating from 2.7-5.25 V single supply, converters...

Read More »
Electronic Converters

Analog Video Media Converters are PTZ-compatible.

Models SVIDF201x-100, CVIDF201x-110, and SVIDF201x-110 are intended to be used in pairs with TX converter transmitting analog video signal from coaxial output on camera over fiber optic cabling to optical video RX converter, which then converts signal back to analog NTSC, PAL, or SECAM video signal. PTZ functionality is transmitted via serial data signal compatible with RS232/RS422/RS485....

Read More »
Delta-Sigma ADC offers optimal configurability.
Electronic Converters

Delta-Sigma ADC offers optimal configurability.

Supplied in 4 x 3 mm DFN package, LTC2492 features Easy Drive(TM) design that results in zero average differential input current. This 24-bit, 4-channel delta-sigma ADC can be driven directly from bridges, RTDs, thermocouples, and high-impedance sensors, and its rail-to-rail input signals can be directly digitized while maintaining dc accuracy of 2 ppm INL. Also included, internal temperature...

Read More »
Electronic Converters

Media Converter allows network expansion via fiber optics.

Designed to convert 1000Base-T to 1000Base-SX/LX signals, 3301 Gigabit Ethernet Media Converter expands network through gigabit fiber optic connection, extending single mode fiber link up to 20 km. Devices feature LC and SC connector formats in multi- and single-modes, and can be installed stand-alone or mounted on media converter chassis. Supporting packets up to 10 KB, series features...

Read More »
DAC offers 6 software-programmable output ranges.
Electronic Converters

DAC offers 6 software-programmable output ranges.

Operating from dual ±5-±15 V analog supplies and 3-5 V digital supply, 16-bit quad Vout Model LTC2704-16 features DC performance of ±2 LSB INL and ±1 LSB DNL. Each of 4 DACs can be programmed via 3-wire SPI-compatible serial interface for 1 of 4 bipolar output ranges or 1 of 2 unipolar output ranges. Reference input voltages are inverted internally and can be driven to...

Read More »
Electronic Converters

Serial Device Routers offer industrial networking security.

Magnum DX 800 and DX 40 Serial-IP Converters extend security and network management to distributed serial devices in power substations and other harsh industrial environments. Magnum DX800 provides Dynamic Serial Edge that combines features of serial-IP device server, Ethernet switch, IP router, and IP firewall. It supports 4 serial interfaces and 4 Ethernet ports, including 2 fiber ports. Magnum...

Read More »
Multichannel ADC offers programmable input ranges.
Electronic Converters

Multichannel ADC offers programmable input ranges.

Capable of speeds to 100 kS/sec, LTC1859 incorporates 8-channel multiplexer that can accept 4 differential inputs, 8 single-ended inputs, or combinations of both. Software-programmable inputs are fault-protected to ±25 V, and dc performance is 15-bit no missing codes over temperature and ±3 LSBMAX INL. Internal 2.5 V reference has temperature coefficient of ±10 ppm/°C and...

Read More »
Ultra Low-Power ADCs consume as little as 22 µA at 1 kS/sec.
Electronic Converters

Ultra Low-Power ADCs consume as little as 22 µA at 1 kS/sec.

Suited for battery-powered devices and portable DAQ systems, 10-bit, single-channel AS1526/27 series combine sampling speed up to 73 kS/sec with internal clock and external clock support in SOIC-8 package. SPI-, QSPI-, and Microwire-compatible interface enables high-speed data access and minimizes board space requirements. While AS1526 features internal 2.5 V reference and consumes 4 mW, AS1527...

Read More »
Converter Cable connects serial device to Ethernet network.
Electronic Converters

Converter Cable connects serial device to Ethernet network.

Measuring 28 in. long, eCOV-110 links serial devices to computer network without additional PC or replacing existing devices. It supports TCP/IP, UDP, HTTP, DHCP, TELNET, ICRM, and ARP protocols and provides up to 115 Kbaud RS-232 port compatible with 10/100 Mbps Ethernet hubs. Powered by external wall-mount supply or +5 V on pin 9 of RS-232 port, FCC/CE-marked unit comes with browser-based...

Read More »
Remote Charge Converter features ultra low noise design.
Electronic Converters

Remote Charge Converter features ultra low noise design.

Measuring Â-½ in. dia by 3.2 in. long, Model 2771C transforms piezoelectric transducer's high impedance charge output to low impedance voltage proportional to transducer's charge output. It provides frequency response of 0.4-50 kHz, operates within constant current range of 4-20 mA, and is available in fixed gains of 0.1 mV/pC, 1.0 mV/pC, or 10 mV/pC. Operating from -40 to 212°F,...

Read More »

All Topics