Electronic Converters

Electronic Converters

Dual Transmit DACs have high-speed, low-power design.

Each model in AD911x and AD971x series integrates two 8-, 10-, 12-, or 14-bit DACs with sample rates up to 125 MSPS on one 6 x 6 mm device. Designers can adjust FS current from 1-4 mA or 4-20 mA with one, pin-compatible architecture and common software code. Products achieve 85 dB SFDR to 10 MHz and dissipate 220 mW at max sample rate, 53 mW @ 50 MSPS, or 37 mW @ 10 MSPS. Additional components...

Read More »
Electronic Converters

DAC integrates 10 ppm/°C reference in 4 x 3 mm package.

Suited for space constrained optical networking circuit boards, LTC2636 offers 12-bit DC performance of ±2.5 LSB integral nonlinearity error and ±5 mV offset error, suited for open- and closed-loop systems. It offers less than 2.4 nVos crosstalk, and operates from single 2.7-5.5 V supply, with supply current as low as 100 Â-µA/DAC. Unit can be used for driving optical attenuators...

Read More »
Electronic Converters

ICs are available in 5 x 5 x 1.0 mm package.

Available in 5 x 5 x 1.0 mm body, 32-pad, lead pitch 0.50 mm Micro Lead Frame package, CMOS ICs of Universal Frequency-to-Digital Converters UFDC-1 and UFDC-1M-16 can work with any sensors from frequency-time signal domain group and convert frequency, period, duty-cycle, duty-off factor, and rotation speed to digital. Model UFDC-1 and UFDC-1M-16 have programmable accuracy from 1 to 0.001% upto...

Read More »
Electronic Converters

Serial Converter facilitates RS232/RS422 signal switching.

Model LTC100 lets users take advantage of RS422/RS485 on systems only equipped with RS232, without changing hardware/software or installing software drivers. Selected via slide switch, RS422 and RS485 modes respectively support up to 10 and 32 devices connected together. Converter, fully compatible with PC serial COM port, supports 1.2 km max communication distance and 921.6 Kbps max serial...

Read More »
Electronic Converters

Digital Receivers leverage Virtex-5 FPGAs.

Echotek® Series DCM-V5-XMC incorporates A/D and D/A technology for high-speed and high-resolution data conversion while preserving quality of original signal. It implements Virtex(TM)-5 SX95T or LX155T FPGA, which can be programmed by end-user for specific application requirements. Each FPGA is accompanied by DDR-II-SDRAM and QDR-II-SRAM memory chips, available for buffering input data...

Read More »
Electronic Converters

National Semiconductor Delivers Industry's Best Linearity Performance with New High-Speed, 16-Bit ADC and DVGA

PowerWise Signal Path Products Deliver Unparalleled 90.6 dBFS SFDR for Multi-Carrier GSM Base Stations November 11, 2008 - Two new high-speed signal path products, a 16-bit, 130 mega-samples per second (MSPS) analog-to-digital converter (ADC) and a digital-controlled variable gain amplifier (DVGA), were announced today by National Semiconductor Corp. They deliver the industry's best linearity...

Read More »
Electronic Converters

ADC dissipates only 127 mW of power.

Operating from 1.8 V analog supply, LTC2261 14-bit 125 Msps ADC offers SNR performance of 73.4 dB and SFDR of 85 dB at baseband. Low jitter of 0.17 psRMS allows undersampling of IF frequencies with noise performance, while digital outputs can be set to full rate CMOS, double data rate CMOS, or double data rate LVDS. Offered in 6 x 6 mm QFN package, unit randomizes digital output before it is...

Read More »
Electronic Converters

Video Server can stream digitized video over IP networks.

Featuring MPEG-4/Motion-JPEG format video compression, 4-channel Model OVS-400 of OWL series converts analog video signals into IP video streams. Product supports 12 Vdc power input, video output in all type of resolutions including full D1/CIF/QCIF, two-way audio, 2 sets of alarm input/output via terminal block connection, and offers manually bit rate control from 28 Kbps up to 3 Mbps. Built-in...

Read More »
Electronic Converters

SOC helps build digital terrestrial broadcast receivers.

Designed for tuners that enable viewing of digital terrestrial broadcasts on analog televisions, EMMA(TM)2TS system-on-chip incorporates Full SegNote OFDM channel decoder compliant with Japanese Integrated Services Digital Broadcasting-Terrestrial (ISDB-T)standard. It also includes MPEG2 decoder, image display, video/audio D/A converter, and smartcard interface. SOC suppresses power consumption...

Read More »
I/O Wiring Conversion System Helps PLC Users with Phased Migration to Rockwell Automation Integrated Architecture
Electronic Converters

I/O Wiring Conversion System Helps PLC Users with Phased Migration to Rockwell Automation Integrated Architecture

Helps minimize wiring errors and reduce labor costs when migrating to newer programmable automation control systems MILWAUKEE, Nov. 13, 2008 - Rockwell Automation has developed an I/O wiring conversion system that helps users migrate existing control platforms to the AllenÂ-¬Bradley ControlLogix programmable automation controller-based I/O platform. The system is part of the Rockwell...

Read More »

All Topics