Electronic Converters

Interface Converter suits RS485 multi-point applications.
Electronic Converters

Interface Converter suits RS485 multi-point applications.

ST fiber-to-multi-point RS485/422/232 interface converter Model 4152/4153 has typical operating speeds up to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion. It features 3 kVdc isolation to prevent system ground loops, and ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Unit is available in compact...

Read More »
Electronic Converters

ADC enables 12-bit resolution with 200 MHz signal bandwidth.

Delivering 550 MSPS sample rate, ADS54R463 allows for high IF and direct RF sampling architectures to simplify system design. It offers 64.1 dBFS SNR, 80 dBc SFDR at 450 MHz and 62.5 dBFS SNR, 70 dBc SFDR at 900 MHz, enabling efficient power amplifier linearization in digital pre-distortion solutions, as well as range and sensitivity in defense imaging and communication systems. Supplied in 14 x...

Read More »
Electronic Converters

DC/DC Converters come in IC-style surface mount packages.

Comprising 9 models with efficiency levels up to 70%, 1 Watt NTF Series is available with choice of 4-6, 9-15, and 18-36 V input voltages and tightly regulated output voltages of 5, 12, or 15 V. All devices provide 1 kVdc isolation and include voltage trim feature. Measuring 0.7 x 0.5 x 0.228 in., RoHS-compliant converters feature power density of 0.7 W/cmÂ-³, operating temperature of -40 to...

Read More »
Electro Standards Laboratories Announces New Products Designed for Casino VLT Networks
Electronic Converters

Electro Standards Laboratories Announces New Products Designed for Casino VLT Networks

Electro Standards Laboratories (ESL), Cranston, RI, has just announced its new family of products designed for Casino VLT Networks. The four models of HP Fiber to RS-232 and RS-485 converters allow connection of HP Fiber Optic Linked Terminals to the RS-232 and RS-485 ports of controllers. The Model 4154 HP Fiber Repeater with RS-232 Traffic Monitor Port is used to regenerate data signals in...

Read More »
Optical-to-Electrical Converter features rugged design.
Electronic Converters

Optical-to-Electrical Converter features rugged design.

Housed in compact extruded aluminum enclosure, J740 performs wideband analog conversion of fast fiber-coupled signals from DC to greater than 1 GHz. It features calibrated conversion gain of 1 V/mW (0.5 V/mW into 50W) and is compatible with single and multi-mode fiber. Available in 850, 1,310, and 1,550 nm wavelengths, unit suits applications including high-speed data links, fiberoptic test and...

Read More »
Electronic Converters

ADC Mezzanine Card offers 6 GB/sec data throughput.

Available in both air-cooled and conduction-cooled rugged versions, ADC512 FPGA Mezzanine Card is 3 GS/sec, 8-bit ADC card that routes high-speed ADC I/O directly to host board FPGA via FMC connector. Dual-channel card's ADC devices support sampling rate of 3,000 MS/sec per channel. By routing ADC interfaces directly to FMC connector, ADC512 enables FPGA on host board to directly control and...

Read More »
Low Power Computer Captures and Transmits Remote Data
Electronic Converters

Low Power Computer Captures and Transmits Remote Data

The JK microsystems DataMover offers an economical solution to remote data capture and transmission. By integrating optional GPS receiver, GPRS cell modem and sleep-mode power controller in a die cast aluminum enclosure, the DataMover is capable of logging and transmitting data from remote or inaccessible locations. With power consumption of less than one watt during operation and less than 3...

Read More »
Electronic Converters

Microchip Technology Recognized for Leadership and Innovation

Company Honored by National and Arizona Publications for Product and Business Excellence CHANDLER, Ariz., Jan. 27, 2009 [NASDAQ: MCHP] - Microchip Technology Inc., a leading provider of microcontroller and analog semiconductors, today announced that it has been recognized by the following business and electronics organizations for product and workplace leadership. As a worldwide leader in...

Read More »
Electronic Converters

Single-Channel DACs feature low power of 80 µA at 1.8 V.

Available in SC70 package, 16-bit pin-compatible DAC8411 family has power supply range of 1.8-5.5 V and settling time of 6 Â-µsec. They utilize 3-wire serial interface that operates at clock rates up to 50 MHz, and have operating temperature of -40 to +125°C. Providing low power-on glitch of only 17 mV and 0.15 nV-sec output glitch energy, compact devices are suited for battery-powered...

Read More »
Electronic Converters

Media Converter operates in temperatures from -40 to +75°C.

Designed to convert 10/100Base-TX Ethernet signals to 100Base-FX fiber, iCON-32900 series converter accepts voltage range from 12-48 Vdc. Features include Link Fault Pass-through (LFP) function which allows tracing network link failure; 2 redundant power inputs for non-stop operation; and relay output alarm. Offered in IP20 aluminum housing, unit meets NEMA TS1/2, UL1604, and UL60950 standards...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers